<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
    <channel>
        <title>PULLOFF.COM</title>
        <description>Independent Pulling News</description>
        <link>http://www.pulloff.com/phorum/index.php</link>
        <lastBuildDate>Thu, 30 Apr 2026 08:52:43 -0700</lastBuildDate>
        <generator>Phorum 5.2.23</generator>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353709,353709#msg-353709</guid>
            <title>Pulling parts, innercooler pumps, Aviaids, Ring and Pinions (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353709,353709#msg-353709</link>
            <description><![CDATA[ Qty 2 Holset HC5A frame size factory rebuild kits. NOS $200 / each<br />
<br />
AMT 1HP DC electric washdown pump. Moves 52 gallons per minute. Used to circulate innercooler water. Works great $1000<br />
<br />
AMT 3/4 HP DC washdown pump. Similar specs to the pump listed above. $800<br />
<br />
Wimer billet guillotine, cross and air horn. Utilizes a standard 7.94 clamp $1500<br />
<br />
Qty 2 Aviaid 4 section pumps. 2 motor sections, 1 turbo supply section and 1 fuel supply. Each pump has less than 1 season of use and are ready to go. $1800 / each<br />
<br />
Large coupler to adapt to SQHD course spline pinion. Engler. $300<br />
<br />
SQHD Ring and Pinion sets. 3.90 fine spline, 4.11 fine spline, 4.33 course spline. $400 / each<br />
<br />
IH factory cross over pipe with a pair of Riverside water injection nozzle ports welded into it. $100<br />
<br />
PROFAB 1.75-27 clutch shaft assembly for a component tractor. Adapts to 1.75-22 spline and includes driveshaft to reach Profabs 3 or 4 speed transmission. $1000<br />
<br />
Call or text 6zero8- 3one7-73two1 with offers or questions. Neil Christensen]]></description>
            <dc:creator>neilsroom</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 30 Apr 2026 07:48:39 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353708,353708#msg-353708</guid>
            <title>Harts 4.1 turbo (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353708,353708#msg-353708</link>
            <description><![CDATA[ Nice older Harts 4.1<br />
Maybe a 2015 model but unsure<br />
8 blade intake wheel<br />
11 blade exhaust wheel<br />
Probably less than 20 runs on it<br />
Nice air kill and velocity stack to go with it <br />
$2,000<br />
Can send pictures Call or text Chris 937-538-8746]]></description>
            <dc:creator>Chrismann1997</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 30 Apr 2026 07:43:10 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353706,353706#msg-353706</guid>
            <title>Wimer 4.6 turbo (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353706,353706#msg-353706</link>
            <description><![CDATA[ Nice used Wimer 4.6<br />
11 blade exhaust wheel<br />
1.14 exhaust housing<br />
Not sure on number of runs<br />
Ready to go<br />
$4,000 obo<br />
Can send pictures <br />
Call or text Chris 937-538-8746]]></description>
            <dc:creator>Chrismann1997</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 30 Apr 2026 07:36:32 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353702,353702#msg-353702</guid>
            <title>18.4-38 Big letter radials (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353702,353702#msg-353702</link>
            <description><![CDATA[ got a set of 18.4-38 Big Letter Radials for sale they are about 10 percent tread left are very sharp just enough bar for pulling or would make an awesome set of cuts... one spot has small separation on sidewall but was mounted last year and held great and pulled great last year Located in mechanicstown ohio 850 obo call or text three three zero 771 1438 for pictures or more info]]></description>
            <dc:creator>casper bros farms</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 30 Apr 2026 06:22:19 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353701,353701#msg-353701</guid>
            <title>Toter or Trailer (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353701,353701#msg-353701</link>
            <description><![CDATA[ Looking for a 53ft trailer with living quarters for hauling a tractor or a Toter and trailer.<br />
Text or call 715-six13-2545]]></description>
            <dc:creator>Cole</dc:creator>
            <category>Wanted</category>
            <pubDate>Thu, 30 Apr 2026 05:44:37 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353700,353700#msg-353700</guid>
            <title>John Deere 4.1 Limited Pro (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353700,353700#msg-353700</link>
            <description><![CDATA[ 7930 John Deere Limited Pro Stock 4.1 - All Buck&#039;d Up<br />
Currently sitting in 9th place outta 23 in the Grand National NTPA circuit after the southern swing.<br />
New Wimer Charger with 6 passes on.<br />
New Wimer 16mm fuel pump with 4 passes on<br />
Harts 5 by 30 injectors<br />
Race Pak data logger<br />
Billet crank with 7 hooks on it<br />
Billet head<br />
466 block<br />
New 14 ply parks pullers with 6 passes on keiser rims<br />
Pro Fab transmission, 4 speed with big john deere rear end<br />
Air bags on front end, Simpson water valve, new tranny blanket last year<br />
Cage certified NTPA last year<br />
Buy this tractor and take over my spot in grand national circuit. We are in Bowling green this year as well<br />
$170,000 and will come with spare 16mm harts pump and spare harts 4.1 charger, spare pistions and sleeves, bearings.<br />
Call Cole at 715-six13-2545 for pictures or any questions.]]></description>
            <dc:creator>Cole</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 30 Apr 2026 05:39:04 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353697,353697#msg-353697</guid>
            <title>Sbjd adjustable front timing cover (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353697,353697#msg-353697</link>
            <description><![CDATA[ Looking for SBJD front timing cover for adjustable timing gear set also to have the ability to run fuel pump off of injector drive call or text 4178487554]]></description>
            <dc:creator>kolekennemer</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 29 Apr 2026 20:34:29 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353696,353696#msg-353696</guid>
            <title>30.5-32 double cuts on Drussle Aluminum wheels, IH 666 backplate engine plate (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353696,353696#msg-353696</link>
            <description><![CDATA[ 30.5-32 double cuts on Drussle aluminum wheels, 14 inch backspace I believe $3000<br />
IH 666 rear engine plate $600]]></description>
            <dc:creator>hypermax6.66</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 20:30:50 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353695,353695#msg-353695</guid>
            <title>Tube frame for 66 series (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353695,353695#msg-353695</link>
            <description><![CDATA[ Tube frame for 66 series, goes all the way back to the axle housings, wasn’t finished but it’s a good start $3500<br />
call or text 9372171294]]></description>
            <dc:creator>hypermax66.6</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 20:28:35 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353693,353693#msg-353693</guid>
            <title>Ih injectors and apex turbo (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353693,353693#msg-353693</link>
            <description><![CDATA[ Ih stock body’s Setup by pump doctor long tips 5x23 dual feed 3 passes $2800 shipped bought billets reason for selling and a apex turbo 5 hooks 3x3.5 t6  $5000 859 583 3274 thanks]]></description>
            <dc:creator>hayes73</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 20:04:47 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,353692,353692#msg-353692</guid>
            <title>Was Cleetus a net positive for pulling? (5 replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,353692,353692#msg-353692</link>
            <description><![CDATA[ Was Cleetus McFarland hooking a mod at the Florida pull a net positive or negative for the sport of pulling?]]></description>
            <dc:creator>What do u think?</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Thu, 30 Apr 2026 07:18:53 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353690,353690#msg-353690</guid>
            <title>HYDRAULIC WINCH KIT (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353690,353690#msg-353690</link>
            <description><![CDATA[ HUMVEE M998 MILITARY TRUCK HYDRAULIC WINCH KIT.  HEAVY DUTY.  10,500 LB.  WITH CABLE AND FRONT MOUNT PLATE.  $2,500.  (608) 963-2999.]]></description>
            <dc:creator>Bob Scott</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 14:32:32 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353689,353689#msg-353689</guid>
            <title>Dt466 truck engine (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353689,353689#msg-353689</link>
            <description><![CDATA[ Came out of a 85 model truck.  Engine ran fine. Had 132k miles on odometer.  <br />
6067826737.    $1500 obo.]]></description>
            <dc:creator>BrumleyFarms</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 14:22:01 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353687,353687#msg-353687</guid>
            <title>Wanted two piece BBJD valve cover (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353687,353687#msg-353687</link>
            <description><![CDATA[ looking for a tall BBJD valve cover with removeable top for valve adjustment. Or any other form of two piece valve cover. <br />
Call or text 9205901268]]></description>
            <dc:creator>excessive change</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 29 Apr 2026 12:19:04 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353686,353686#msg-353686</guid>
            <title>5x22 injectors (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353686,353686#msg-353686</link>
            <description><![CDATA[ Looking for a set of good used set of 5x22 duel feed injectors for a dt466]]></description>
            <dc:creator>benwolfsen</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 29 Apr 2026 12:03:55 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353685,353685#msg-353685</guid>
            <title>.093 injection lines (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353685,353685#msg-353685</link>
            <description><![CDATA[ looking for a set on .093 inj line for a dt466 with p pump.  Can be pre bent or home dent.]]></description>
            <dc:creator>benwolfsen</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 29 Apr 2026 12:02:29 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353684,353684#msg-353684</guid>
            <title>20.8-34 recaps (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353684,353684#msg-353684</link>
            <description><![CDATA[ have a set of 20.8-34 recaps for sale about 40 percent tread the tread pattern is firestone super all no cuts or boots and good beads located in Mechanicstown ohio call or text three three zero 771 1438 for pictures or more info 700 obo]]></description>
            <dc:creator>casper bros farms</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 11:18:56 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353683,353683#msg-353683</guid>
            <title>RD 501 Blocks &amp; Sleeves (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353683,353683#msg-353683</link>
            <description><![CDATA[ Blocks (2)  $500.00 for both  for sale <br />
6 New Sleeves  $600.00 <br />
Can send pics - (412) 974-8617]]></description>
            <dc:creator>Ted</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 11:07:48 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353682,353682#msg-353682</guid>
            <title>JD 4020 ROLLBAR &amp; CANOPY (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353682,353682#msg-353682</link>
            <description><![CDATA[ Factory rollbar and canopy for 4020 etc. Has extra spacer blocks that would be used for open station 30 series. Canopy is average.  $1650<br />
Illinois<br />
217 343 7865]]></description>
            <dc:creator>mark b</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 09:27:05 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353681,353681#msg-353681</guid>
            <title>Profab Drop gears (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353681,353681#msg-353681</link>
            <description><![CDATA[ Looking for a set of PROFAB 29/21 for a John Deere Powershift 4455 rear end with stock final drives. 416 930 3610]]></description>
            <dc:creator>Billet Buck</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 29 Apr 2026 09:03:44 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353679,353679#msg-353679</guid>
            <title>24.5-32 Full Pull Tires on Kaiser Wheels (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353679,353679#msg-353679</link>
            <description><![CDATA[ 24.5-32 Full Pull made is USA ProPuller double cut tires on Kaiser aluminum wheels. Tires were just touched up at Hawthorn tire, .300 edge, wheels are 13” offset, very nice set $5500 can&#039;t get photos to upload but can text them. Call/text 5seven3-301-six559]]></description>
            <dc:creator>Goellersmm</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 29 Apr 2026 08:18:55 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353674,353674#msg-353674</guid>
            <title>John Deere factory 2 speed (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353674,353674#msg-353674</link>
            <description><![CDATA[ Looking for a built John Deere 2 speed and somebody to point me in the direction of where to get one. Can’t seem to hold a factory one together.<br />
Can contact me at 308-750-4693. Thanks Dylan.]]></description>
            <dc:creator>Dylan</dc:creator>
            <category>Wanted</category>
            <pubDate>Tue, 28 Apr 2026 20:07:34 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353672,353672#msg-353672</guid>
            <title>ProPuller 24.5x32 tires (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353672,353672#msg-353672</link>
            <description><![CDATA[ 10 ply full pulls, 3/8 bar. 4000. <br />
10 ply hole shots, 1/4” bar. 5500<br />
14 ply hole shots on Midwest rims, 13 back space, Franklin center,3/16 Nichols cut. 7000. <br />
Ph 937-417-1075. West central OH.]]></description>
            <dc:creator>BigCeo</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 16:09:53 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,353669,353669#msg-353669</guid>
            <title>ALUMINUM RIMS (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,353669,353669#msg-353669</link>
            <description><![CDATA[ ISO 32" aluminum rims - Midwest or Whip Station - Franklin or 8 Hole (Ford) pattern - Offsets of 18",17",11" & 10" - Keizer&#039;s with offset&#039;s of 17",11" & 10". Please text pictures & info of what U have to - 7one5-302-0493 Thanks, Jon Lynn - Thanks Morgan&#039;s for the space!!!]]></description>
            <dc:creator>JPL</dc:creator>
            <category>Wanted</category>
            <pubDate>Tue, 28 Apr 2026 14:52:33 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353668,353668#msg-353668</guid>
            <title>FORD HEAD (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353668,353668#msg-353668</link>
            <description><![CDATA[ Ford 7.8 L. head ran on LLSS = 10 runs - done by GMS/Kevin Hall. $4,000.00 OBO. Please Text or Call  7one5-302-0493 - Thanks, Jon Lynn. Thanks Morgan&#039;s for the space!!!]]></description>
            <dc:creator>JPL</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 14:38:00 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353667,353667#msg-353667</guid>
            <title>Bosch Billet Injectors (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353667,353667#msg-353667</link>
            <description><![CDATA[ Have a set of Bosch billet dual feed 5x25 injectors for sale. Bought them used for a 466 Deere and ran for 1 season. They have not been used since Fair Valley Performance went through them and everything checked out fine. Asking $2500. Open to offers. Located in eastern Nebraska.  call or text 402-719-5656]]></description>
            <dc:creator>CTV</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 13:19:54 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353666,353666#msg-353666</guid>
            <title>LLSS Cockshutt 570 (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353666,353666#msg-353666</link>
            <description><![CDATA[ LLSS COCKSHUTT 570-Rydahl Pulling<br />
-Turnkey with fresh rebuild<br />
-570 rear end w/ billet differential<br />
-Custom 4 speed transmission<br />
-Chrome Moly Frame and Roll cage<br />
-Nice set of 30.5 x 32 Firestone All Traction 10 ply Pullers on light weight Aluminum rims<br />
-GMS fuel system-4 stage w/ custom Aluminum Intake<br />
-Harts Turbo<br />
-RPM Data system w/ Digital Dash<br />
-Hercules 3400 engine w/ 12 port cross flow head<br />
-Custom equal length exhaust header<br />
-Lots of extra parts included: Cylinder Head, Crankshaft, Camshaft, Valvetrain, <br />
and billet gears.<br />
<br />
<br />
$62,000 OBO  (price reduced)<br />
<br />
<br />
Reason for selling-going back to one tractor<br />
This tractor has been competitive all over the Midwest and Canada<br />
Several years points champ in Michigan<br />
2023 Enderlee Pull Off Winne<br />
Pictures and videos on Facebook "Rydahl Pulling"<br />
<br />
Call Chris 616-835-3275   <br />
 or Tim 616-835-3440]]></description>
            <dc:creator>TWOTONE3451@YAHOO.COM</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 12:11:14 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353665,353665#msg-353665</guid>
            <title>5×35 triple feed injectors (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353665,353665#msg-353665</link>
            <description><![CDATA[ Three sets of 5 x 35 triple feed big body international injectors set of HARTS new last year 3800 Weimer’s year and a half old just redone 3400 instead of Columbus 2500<br />
740-407-2735. Thanks PS prices are negotiable.]]></description>
            <dc:creator>IH PULLER</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 10:51:09 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353663,353663#msg-353663</guid>
            <title>3pt weight bar (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353663,353663#msg-353663</link>
            <description><![CDATA[ I have a nice heavy duty built 3point weight bar for a tractor the price is 500 dollars it is brand new off the weld bench will paint it to whatever color you prefer call or text three three zero 771 1438 for pictures of it I am located in Mechanicstown Ohio can ship on your dime]]></description>
            <dc:creator>CasperBrosFarms</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 07:47:08 -0700</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,353662,353662#msg-353662</guid>
            <title>LSS/LLSS INCHES MATTER (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,353662,353662#msg-353662</link>
            <description><![CDATA[ Lss/LLSS Currently running 3 3.6 ball bearing holset turbos.Can easily be switched back to single turbo. New Atlas fully needled billet diff. rearend is fully needled. Complete fresh motor. 436 Block Zero runs. Vogal Billet cam. Fresh 13mm Pump up to 1100cc. Hyper billet rods, GMS billet pistons. New C-rings copper headgasket, 30.5 8 ply pullers on aluminum midwest rims. Weights 5650 bare. up to date on blanket. Only 4 runs on new clutch disks and floaters. 4 disk crowler pedal clutch. $65,000<br />
Thanks for the space!!! <br />
Craig Harnish<br />
Call Eight15-seven39-36zero2]]></description>
            <dc:creator>IHC686</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 28 Apr 2026 06:14:12 -0700</pubDate>
        </item>
    </channel>
</rss>
