<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
    <channel>
        <title>PULLOFF.COM</title>
        <description>Independent Pulling News</description>
        <link>http://www.pulloff.com/phorum/index.php</link>
        <lastBuildDate>Sun, 22 Nov 2026 08:09:33 -0800</lastBuildDate>
        <generator>Phorum 5.2.23</generator>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357090,357090#msg-357090</guid>
            <title>Farmall 656 with D282 engine and M&amp;W Turbo (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357090,357090#msg-357090</link>
            <description><![CDATA[ For sale is a all original IH 656 diesel tractor with a good D282 engine and M&W turbo. Runs very well and strong. Starts well. No bubbles in the radiator. 5500 original hours and very straight. Excellent flat top fenders, good IH wide front end with new front tires. Would make a good pulling tractor. Will sell the tractor complete or part it out. Located in northeast Iowa close to Postville. Call 563-379-1456 for more information. Thank you.]]></description>
            <dc:creator>neiowatech</dc:creator>
            <category>For Sale</category>
            <pubDate>Sun, 22 Nov 2026 07:45:52 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,357089,357089#msg-357089</guid>
            <title>NFMS Tickets (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,357089,357089#msg-357089</link>
            <description><![CDATA[ Is there a presale for NFMS tickets? I haven’t seen anything yet.]]></description>
            <dc:creator>Louisville Fan</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Sun, 22 Nov 2026 06:38:33 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357086,357086#msg-357086</guid>
            <title>Titan 14.9x38 top cut tires (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357086,357086#msg-357086</link>
            <description><![CDATA[ Titan 14.9x38 top cut tires in good condition $1500. 715 853 3669]]></description>
            <dc:creator>BLPederson88</dc:creator>
            <category>For Sale</category>
            <pubDate>Sat, 21 Nov 2026 18:33:42 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357085,357085#msg-357085</guid>
            <title>11” clutch old style pullers. (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357085,357085#msg-357085</link>
            <description><![CDATA[ 11” Crower 4 disc <br />
Old style pullers on Midwest wheels. 14” backspace 26” wide. Call if interested let’s make a deal. Thanks 573-219-1466]]></description>
            <dc:creator>?</dc:creator>
            <category>For Sale</category>
            <pubDate>Sat, 21 Nov 2026 12:01:54 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357084,357084#msg-357084</guid>
            <title>466 short block and old style pullers. 11” clutch (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357084,357084#msg-357084</link>
            <description><![CDATA[ Long rod short block. IH 466 all studs, cam, ect. All fresh. Call if interested. Great start it ran very good for me. Switching classes. Call or text for details. Thanks. 573-219-1466]]></description>
            <dc:creator>?</dc:creator>
            <category>For Sale</category>
            <pubDate>Sat, 21 Nov 2026 11:58:26 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357083,357083#msg-357083</guid>
            <title>Pair of Deere Hot Farms (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357083,357083#msg-357083</link>
            <description><![CDATA[ <div style="text-align: right;" class="bbcode"></div>John Deere 4760 510 Hot Farm track ready NTPA certified tractor 20.8 Holeshots on Keiser wheels motor done by Lambs tractor repair 3 speed Gms transmission light weight tractor been running 9500 lb class will make 8500 with over a 1000 on nose with 200 lb driver 120k obo  4320 wheatland fenders tractor was built by Marlatt Engines and dyno 3 speed gms transmission air ride front axle with power steering tractor needs nothing and no expenses was spared on this tractor Pro pullers onKeiser wheels very light can carry 1200 on nose in 8500 lb class with 200 lb driver Ntpa certified and legal tractor both tractors have Wimer 3.4 smooth bore chargers on them with about 5 runs on them 140k for 4320 or make a package deal on both 765 561 1968 can send pics]]></description>
            <dc:creator>J Stewart</dc:creator>
            <category>For Sale</category>
            <pubDate>Sat, 21 Nov 2026 10:56:46 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357082,357082#msg-357082</guid>
            <title>Ih frame (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357082,357082#msg-357082</link>
            <description><![CDATA[ Tube chassis made up for Ih. <br />
Can split and take front off to dyno <br />
5,500 can send pictures]]></description>
            <dc:creator>Luckypull</dc:creator>
            <category>For Sale</category>
            <pubDate>Sat, 21 Nov 2026 07:44:12 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,357078,357078#msg-357078</guid>
            <title>Pulsar/PSR turbos (1 reply)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,357078,357078#msg-357078</link>
            <description><![CDATA[ I’ve seen these turbos and was wondering if anyone has any experience with them for a stock puller. Thanks]]></description>
            <dc:creator>Curious</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Sun, 22 Nov 2026 06:35:53 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357075,357075#msg-357075</guid>
            <title>20.8x38 pro puller hole shots on 22 in kiezer wheels (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357075,357075#msg-357075</link>
            <description><![CDATA[ 20.8 x38 pro puller hole shots on 22 in kiezer wheels.  1/2 in bar. Cut by Hawthorne tire. Tires and rims are in great shape.  Ran on magnumfied hot farm last year. Many wins. <br />
located in edmonton ky<br />
$9000.00 obo <br />
call or text   2706708846]]></description>
            <dc:creator>Jordan harris</dc:creator>
            <category>For Sale</category>
            <pubDate>Fri, 20 Nov 2026 08:55:12 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,357072,357072#msg-357072</guid>
            <title>BBJD timing gears and cover (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,357072,357072#msg-357072</link>
            <description><![CDATA[ Looking for adjustable cam gear, or complete timing gear set as well as timing cover for BBJD call or text 908 528 0387]]></description>
            <dc:creator>JD4440</dc:creator>
            <category>Wanted</category>
            <pubDate>Fri, 20 Nov 2026 03:11:34 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357071,357071#msg-357071</guid>
            <title>510 Hot farms (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357071,357071#msg-357071</link>
            <description><![CDATA[ 2 IH Hotfarms I Got This and Daddy’s Money Proven Tractors Turn key!! $120,000/each Apex air wimer fuel atlas 5 spd trAns all safety equipment 7652659361  call for more info]]></description>
            <dc:creator>Daren</dc:creator>
            <category>For Sale</category>
            <pubDate>Fri, 20 Nov 2026 03:01:02 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,357068,357068#msg-357068</guid>
            <title>looking for a c 301 international engine from a 715 IH combine. (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,357068,357068#msg-357068</link>
            <description><![CDATA[ I am looking for a running or a complete c 301 gas international engine . I am in Niagara Falls area Ontario Canada. Please email me or call or text with what you have,<br />
 905 -774-1932. Mark]]></description>
            <dc:creator>Mark Fawcett</dc:creator>
            <category>Wanted</category>
            <pubDate>Thu, 19 Nov 2026 17:31:17 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357065,357065#msg-357065</guid>
            <title>2018 Pete 579 &amp; 2006 53&#039; Kentucky (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357065,357065#msg-357065</link>
            <description><![CDATA[ 2018 Pete 579 Registered RV and 2006 53’ Kentucky Van Trailer. Truck has 697k on it MX13 on weight loss, 10 Speed Eaton Auto, no blow by, all tires have about 8k on them, disk brakes on the truck, interior is like new, leather seats, aftermarket touch screen. Trailer is setup for pulling. 8k HD aluminum ramps, 12k syn rope smittybilt wireless winch, 12v battery in trailer, 110 throughout trailer and led shop lights in the ceiling, 11 cu ft deep freezer. Wired for 30amp generator hookup. Trailer has polished outers with fresh rubber 255/70r22.5. All new lights on entire truck/trailer combo. Price is 57k obo and for the combo - no trades won’t sell the trailer separately unless the truck goes first. Changed up trailers and trucks and I don’t need 2 (text only 317 five zero nine -2780)]]></description>
            <dc:creator>paul06dmax</dc:creator>
            <category>For Sale</category>
            <pubDate>Thu, 19 Nov 2026 07:10:49 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,357061,357061#msg-357061</guid>
            <title>SBJD farm stock water manifold issue (2 replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,357061,357061#msg-357061</link>
            <description><![CDATA[ Hey guys,<br />
Finishing up my 4440 farm stock build right now and ran into an issue with my factory water manifold/thermostat housing. It is too tall with my new turbo charge pipes. What is everyone doing in this situation? I’m still running the factory cooling system with an electric fan. Any advice would be great. Thanks ! <br />
<br />
Tyler 330-635-0994]]></description>
            <dc:creator>arters76</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Thu, 19 Nov 2026 19:28:40 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357057,357057#msg-357057</guid>
            <title>F/S IH Alcohol Cylinder Head, Oil Pan, Peterson Oil Tank, Turbos, Turbo Parts, etc (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357057,357057#msg-357057</link>
            <description><![CDATA[ Cleaning out the shop!! Don&#039;t be afraid to shoot me an offer on anything!<br />
<br />
-IH Bamber aluminum alcohol head, head is fresh from cylinder head shop, setup for 4-3/4" bore, comes with all valve train, head studs, valve cover, etc (everything except intake & exhaust manifold), could supply information on fuel system, rod & piston information, and camshaft as well $18,000<br />
<br />
-IH aluminum alcohol head built by Roger Lechtenberg & Don Storjohan out of Iowa. Includes intake and exhaust manifold. Head was just serviced 2 runs ago by Harry’s Heads out of Sioux City (valve job, springs checked, etc). Was used on 4.75” & 4.875” bore. Will include a brand new camshaft (will need Hyper needle bearing kit) also. This is a "flat" or diesel style head, no combustion chamber. Can help with fuel system settings, etc. Also can supply rod & piston information as well. $7,500<br />
<br />
-Browell aluminum bellhousing, 8-5/8" depth, setup for cross shaft & rear candle stick/bearing holder (not included), good certification until February 2028. $1000<br />
<br />
-13" Keizer rim halves, were polished but were on the inside of current rims so need a good clean up $800<br />
<br />
-IH oil pan set up for external oil pump three –16 fittings welded into it for pick ups and an internal screen that is removable. $200<br />
<br />
-Peterson oil tank, 5 gallon capacity, two -12 return fittings, two -16 feed fittings, breather fitting $200<br />
<br />
- 2 - Holset HC5A turbos with Keating Machine billet 4.4" intake wheels, 11 blade G-trim (4.4) exhaust wheels, journal bearing, 3.5" hose outlets on intake housings, no exhaust housings included. These were top turbos on a three charger alcohol setup, only reason for selling is they won&#039;t fit our new turbo setup. $1750 each or $3000 for the pair<br />
<br />
-Small water injection tank, it uses boost pressure to pressurize the tank, perfect for a small 8-12 oz of water in a run on a alcohol tractor. $100<br />
<br />
-K&N X-Stream Top Filter Red 11in / 5.125in Neck Flange / 4.37in Height Part # 66-3120 $175<br />
<br />
- 1-Holset HC5A 4.1” intake cover for stock Holset 3523546 wheel (small back) $150<br />
<br />
- 1-Holset HC5A 4.1” intake cover for stock Holset 3593927 (large back) $150<br />
<br />
- 1-Holset 3523546 4.1” inducer x 5.15” exducer intake wheel $100<br />
<br />
- 1-Holset HC5A backing plates $100<br />
<br />
- 1-Holset 11 blade G-trim exhaust wheel machined for ball bearing setup $400<br />
<br />
Call or text, if I don&#039;t answer leave me a message 605-660-two9two1]]></description>
            <dc:creator>Allen Ulmer</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 18 Nov 2026 14:31:31 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,357056,357056#msg-357056</guid>
            <title>Wanted Borg Warner 3LM Turbo (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,357056,357056#msg-357056</link>
            <description><![CDATA[ Looking for a genuine borg warner 3lm turbo Hunter - (417)664-5242 Missouri]]></description>
            <dc:creator>Bilger30</dc:creator>
            <category>Wanted</category>
            <pubDate>Wed, 18 Nov 2026 14:28:28 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357048,357048#msg-357048</guid>
            <title>IH 706 Light Rear-end and Hooker Drawbar (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357048,357048#msg-357048</link>
            <description><![CDATA[ Selling a Lightened IH 706 Rear-end, 52lbs removed from rear. Comes as bare housing with brand new 20.8 Hooker Drawbar Assembly with bolt holes to match lightened housing. Have to be sold together.<br />
<br />
$6,250<br />
<br />
Shoot us an offer wanting gone pretty quick, may have a some room on price.<br />
<br />
Contact us!<br />
<a href="mailto:&#115;&#97;&#108;&#101;&#115;&#64;&#119;&#105;&#112;&#101;&#111;&#117;&#116;&#101;&#110;&#116;&#101;&#114;&#112;&#114;&#105;&#115;&#101;&#115;&#46;&#99;&#111;&#109;">&#115;&#97;&#108;&#101;&#115;&#64;&#119;&#105;&#112;&#101;&#111;&#117;&#116;&#101;&#110;&#116;&#101;&#114;&#112;&#114;&#105;&#115;&#101;&#115;&#46;&#99;&#111;&#109;</a><br />
(937) 497-9473]]></description>
            <dc:creator>Wipe Out Enterprises</dc:creator>
            <category>For Sale</category>
            <pubDate>Wed, 18 Nov 2026 10:03:50 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,357047,357047#msg-357047</guid>
            <title>G&#039;day matey. IHRA sold (12 replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,357047,357047#msg-357047</link>
            <description><![CDATA[ <a href="https://competitionplus.com/ihra-sold-again-as-australian-group-takes-control-with-baders-sportsman-racing-league-in-the-picture/"  rel="nofollow">Aussies buy IHRA</a><br />
<br />
If they ever do pulling again, it really will be international.]]></description>
            <dc:creator>The Original Michael</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Sat, 21 Nov 2026 06:51:17 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357045,357045#msg-357045</guid>
            <title>M&amp;W Turbo Kit for John Deere 4000, 4010, 4020 (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357045,357045#msg-357045</link>
            <description><![CDATA[ M&W turbo kit for John Deere 4000, 4010, 4020, complete and in good condition. Call 563-379-1456 for more information.]]></description>
            <dc:creator>neiowatech</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 17 Nov 2026 19:34:47 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357044,357044#msg-357044</guid>
            <title>IH D360 tractor engine, D407 engine, D282 turbo kit, IH 400 series engines and parts (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357044,357044#msg-357044</link>
            <description><![CDATA[ For sale is a good D360 tractor engine, good D407 engine, good D436 engine, 400 series intercooler with injection lines, NOS DT360 truck pistons, DT414, DT436, DT466 engines and engine parts, NOS DT414 crankshaft, Turbo kit for IH D282 engine, Hydraulic clutch assist kit for 56 and 66 series. Located in northeast Iowa close to Postville. Can ship by pallet. Call 563-379-1456 for more information.]]></description>
            <dc:creator>neiowatech</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 17 Nov 2026 19:32:41 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357043,357043#msg-357043</guid>
            <title>53 ft Wabash Trailer Price Reduced (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357043,357043#msg-357043</link>
            <description><![CDATA[ 1999--53ft Wabash Trailer for Sale. All open no Living area. Generator, Lights, 2 ramp winches with Aluminum Landsport Ramps, 6 Storage Boxes and tire carriers. Low mileage trailer was a yard trailer for 8 years before we used it for pulling we put on 5k miles a year with it. Newer tires 4 are 4years old and 4 are 2years old. All new air bag and shocks 4 years ago. Wheel bearings repacked 6years ago. 2 Winches for tractors and several places for tie downs in trailer. Room for 2 tractors with jeep. Have had up to 4 farm stock tractors in this trailer. $41,500obo need gone make reasonable offer.<br />
<br />
For pic or questions Call or Text Bill 419-722-492three]]></description>
            <dc:creator>Oliver with Cat 3208</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 17 Nov 2026 17:47:07 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357041,357041#msg-357041</guid>
            <title>Two bar cage (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357041,357041#msg-357041</link>
            <description><![CDATA[ Two bar roll cage,  was certified last year. Comes with seat. Was on a mod chassis but has a universal mount that bolts on. <br />
$1000<br />
<br />
Andy Buhr<br />
2I7-2O2-98IO call or text]]></description>
            <dc:creator>Lite Puller</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 17 Nov 2026 14:10:16 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357040,357040#msg-357040</guid>
            <title>18.4-38 pullers (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357040,357040#msg-357040</link>
            <description><![CDATA[ Pair of 18.4-38 agri power pullers  1/2" lug fresh sharpening with zero runs  5000.00<br />
<br />
716-200-3085  located in western NY 14091. I can get them to northwest Ohio for a small fee if paid in full .]]></description>
            <dc:creator>Srf</dc:creator>
            <category>For Sale</category>
            <pubDate>Tue, 17 Nov 2026 14:06:05 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?4,357035,357035#msg-357035</guid>
            <title>Electric/Hydraulic TA (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?4,357035,357035#msg-357035</link>
            <description><![CDATA[ I am looking for an electric over hydraulic TA control for an IH 1066. I have found a few on Facebook marketplace but can’t get any anybody to respond. Any help would be appreciated.]]></description>
            <dc:creator>Acler</dc:creator>
            <category>Wanted</category>
            <pubDate>Tue, 17 Nov 2026 10:51:15 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?2,357026,357026#msg-357026</guid>
            <title>NTPA, PPL  national classes. (4 replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?2,357026,357026#msg-357026</link>
            <description><![CDATA[ I&#039;ve been looking at the classes that both NTPA and PPL have on their national classes.q I don&#039;t believe that the NTPA will offer  the SF class for 2027. I  also wonder if the NTPA needs 3 mod classes. The class that always seems to come back year after year is the OSS class. Like PPL the class is low on numbers and it seems that the class has fee and fewer entries. I also wonder if down the road the Lt.PS class will join the 4.1 PS class on the national circuit? And turning to PPL i believe that they need to offer the Lt.Mod class to their national events. I&#039;ve often wondered why PPL doesn&#039;t take at the LSS tractors and the NTPA take all the 650 alcohol SS tractors. They could switch every other year and run one one year and the other the next year. I realize how enpractical that sounds, however it would help the numbers in each respective class. I realize that both organizations can have a couple event on the same  hence the number of classes. As far as the Outlaws are concerned I&#039;ve never really figured out what are national classes and what aren&#039;t. Also I believe that Chase Richardson will approach changing and streamlining Outlaws classes at a measured pace. As always I would love to see a push from the national organizations to uniform rules.]]></description>
            <dc:creator>Dick Morgan</dc:creator>
            <category>Pulling Forum</category>
            <pubDate>Fri, 20 Nov 2026 15:15:18 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357025,357025#msg-357025</guid>
            <title>Enderle 110 pumps (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357025,357025#msg-357025</link>
            <description><![CDATA[ Enderle 110 Pumps <br />
<br />
$500 each. 3 to pick from <br />
<br />
Greensburg, Pa<br />
<br />
Nathan: 724-493-seven580]]></description>
            <dc:creator>Kayla Graham</dc:creator>
            <category>For Sale</category>
            <pubDate>Mon, 16 Nov 2026 07:51:48 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357024,357024#msg-357024</guid>
            <title>24.5 x 32 pro pullers / full pulls + wheels (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357024,357024#msg-357024</link>
            <description><![CDATA[ 24.5 x 32  pro pullers / full pulls + wheels<br />
10 ply<br />
Northern Sheen Wheels <br />
27” wide <br />
18” inside - 9” outside <br />
9 bolt pattern <br />
Cut/ sharpened/harden/ broken in by Nichols <br />
<br />
<br />
<br />
Ready to go pulling <br />
$7,250 obo<br />
Greensburg, Pa <br />
<br />
Nathan: 724-493-seven580]]></description>
            <dc:creator>Kayla Graham</dc:creator>
            <category>For Sale</category>
            <pubDate>Mon, 16 Nov 2026 07:49:34 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357023,357023#msg-357023</guid>
            <title>Enderle 110 Pump Belt Driven Pump Assembly Set Up (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357023,357023#msg-357023</link>
            <description><![CDATA[ Enderle 110 Pump Belt Driven Pump Assembly Set Up<br />
3 pulleys <br />
Stub shaft <br />
Belt and spare belt <br />
<br />
$850<br />
Greensburg, Pa <br />
<br />
Nathan: 724-493-seven580]]></description>
            <dc:creator>Kayla Graham</dc:creator>
            <category>For Sale</category>
            <pubDate>Mon, 16 Nov 2026 07:45:17 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357021,357021#msg-357021</guid>
            <title>SBJD 640 COMPLETE ENGINE (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357021,357021#msg-357021</link>
            <description><![CDATA[ SBJD 640 CUBIC INCH MOTOR FOR SALE<br />
<br />
BILLET CRANK, RODS, PISTON AND STEEL BILLET HEAD.<br />
<br />
FULL ROLLER MOTOR WITH BILLET CAM.<br />
<br />
NO FUEL AND AIR INCLUDED, NO FLYWHEEL AND CLUTCH, NO FRONT DRIVE<br />
<br />
COMES WITH SPARE BILLET STEEL CYLINDER HEAD, OVER THE TOP HEADER, PISTONS AND SLEEVES.<br />
<br />
KYLE - 785.213.6575 <a href="mailto:&#75;&#89;&#76;&#69;&#64;&#74;&#79;&#69;&#66;&#85;&#83;&#67;&#72;&#65;&#71;&#82;&#69;&#80;&#65;&#73;&#82;&#46;&#67;&#79;&#77;">&#75;&#89;&#76;&#69;&#64;&#74;&#79;&#69;&#66;&#85;&#83;&#67;&#72;&#65;&#71;&#82;&#69;&#80;&#65;&#73;&#82;&#46;&#67;&#79;&#77;</a><br />
<br />
$50k]]></description>
            <dc:creator>Chach</dc:creator>
            <category>For Sale</category>
            <pubDate>Mon, 16 Nov 2026 07:07:22 -0800</pubDate>
        </item>
        <item>
            <guid>http://www.pulloff.com/phorum/read.php?3,357018,357018#msg-357018</guid>
            <title>Holeset HX60 (no replies)</title>
            <link>http://www.pulloff.com/phorum/read.php?3,357018,357018#msg-357018</link>
            <description><![CDATA[ Holeset HX60 3x3 brand new never ran $2000 can text pics Thanks 724-350-0563]]></description>
            <dc:creator>Bindergrinder44</dc:creator>
            <category>For Sale</category>
            <pubDate>Sun, 15 Nov 2026 17:57:20 -0800</pubDate>
        </item>
    </channel>
</rss>
