john deere engine March 30, 2012 02:13PM
I bought a john deere 9500 combine engine and want to put it in a 4430. After i bought it,i was informed that some of the 9500 engines had a bigger timming gears and cover forcing it not to work to well in the tractor do to the hydro pump that has to bolt to the front. How do i know if i have the bigger gears and if i do, what can i do to fix the problem. Its for a farm class tractor and i'm new at this. Thanks
Reply Quote

Re: john deere engine March 30, 2012 04:10PM
The bigger of the two covers,covers practically the whole front of the engine. The smaller one, covers just the gears.
Reply Quote

Re: john deere engine March 31, 2012 12:55AM
If i have the bigger one how could i make it work. I have the 404 to exchange parts on.
Reply Quote

Re: john deere engine March 31, 2012 02:44AM
The 404 cover will not work, if the gears are bigger. You should be able to cover the holes that you don't need, to keep the oil from coming out.
Reply Quote

Re: john deere engine March 31, 2012 03:12PM
dont understand. can this big timing gears be installed and still run my hydro pump
Reply Quote

Re: john deere engine March 31, 2012 11:19PM
Yes you can still use your hydraulic pump. I installed this same wide gear drive engine in a 4230. The 4230 is a lot shorter frame.
You just have to either make a new drive system or mix and match parts from other deere tractors to make it work.
I think I used the factory 9500 drive of off the dampner and used a drive coupler from a 4010 on the pump side.
Reply Quote

Re: john deere engine April 01, 2012 01:14AM
Thank you for the info. Did you run a electric fan then.
Reply Quote

Re: john deere engine April 01, 2012 04:12AM
At first I I had to run the stock fan or at the least a stock appearing due to an IDIOT president of the organization. As soon as they allowed electric
I fans I switched.
Reply Quote

Re: john deere engine April 01, 2012 04:58AM
How did you run a stock fan or is there a Number i could call you on and ask a few questions.
Reply Quote

Re: john deere engine April 01, 2012 12:36PM
Can a guy use the same flywheel from a 4430 on that motor
Reply Quote

Re: john deere engine April 07, 2012 02:34PM
any other help would be nice. thank you for all the other info
Reply Quote

Re: john deere engine April 07, 2012 03:41PM
can the exhaust from the 404 work on that motor or should i use a different one
Reply Quote

Re: john deere engine May 02, 2012 02:28PM
i ran the same set up but i used the 404 timing cover with a spacer made to make it fit the wide gears. had one made for $300. then used the 404 water pump and fan with a spacer for the pump. works good had no trouble with it. If you want one let me know
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,578, Posts: 229,608, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,858.

Our newest member BadHabit2