what piston is in a 8.1 January 26, 2014 01:16AM
Can anyone tell me does a 8.1 have the high top ring on the piston or is it like the older 466 pistons with the lower ring

Re: what piston is in a 8.1 January 26, 2014 11:44AM
hi top ring

Re: what piston is in a 8.1 January 26, 2014 02:44PM
If you want a low ring piston use a 55 series its the same thing

Re: what piston is in a 8.1 January 26, 2014 03:02PM
Thought they were different bore

Re: what piston is in a 8.1 January 26, 2014 03:25PM
Same bore stroke is 4.75 on a 466. On a 8.1 the stroke is just over 5 inches. If I remember right the wrist pin height is the same.



Edited 1 time(s). Last edit at 01/26/2014 03:29PM by Hotsmallblock.

Re: what piston is in a 8.1 January 26, 2014 11:58PM
OK I have pistons that r already cut that r out of a 466 so I should be able to use those right but not the sleeves

Re: what piston is in a 8.1 January 27, 2014 12:16AM
Give me a call 920-366-0609

Re: what piston is in a 8.1 January 27, 2014 07:46AM
If stroke is longer on the 8.1 and wrists pin is at the same spot on the 2 pistons won't that make the stroke longer and put piston into the head

Re: what piston is in a 8.1 January 27, 2014 08:20AM
Yes I just took a look at some of the pistons I had had used in the past. We used a 466 piston but we machined the top of the piston off.

Re: what piston is in a 8.1 January 26, 2014 01:32PM
That's what I was afraid of what's the best thing to do with a 8.1 just go straight to a 4.75 kit

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,576, Posts: 229,605, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,857.

Our newest member BadHabit2