07:18:30am, Friday, April 19, 2024
John deere 404
|
Manifold question. What would be the best one with regards to turbo's? Is there a 466 one that wont require the hood to be cut? This would on a 4430. |
Re: John deere 404
|
55 series
|
The 55 series exhaust manifold is considered THE one to use, it will get you a T4 exhaust housing foot without an adapter. Unless you're running something bigger than an HX60 you shouldn't have any trouble keeping it under the hood on a 4430. You are going to run into problems with the water outlet manifold. You can mess around and cut, hack and weld it up so it's moved out of the way to clear the turbo's compressor housing or just make up a simple one with some plates and some pipe fittings. |
Re: John deere 404
|
Correct me if im wrong, but the 7810 therm housing i think will correct this? Anyone out there that can shed some light on this? |
Re: John deere 404
|
55 series
|
You are correct, it will, but what are you going to do about the water pump? If you put the thermostat housing on the front of the head you will either need to have a gear driven water pump or an electric one. |
Re: John deere 404
|
Let me ask you then. Can a plate be made to keep the charger away from the water jacket? I wasnt going to run anything much larger than a 3lm or s300.
Would a combine manifold work? Would there be clearence enough at the dash/firewall? |
Re: John deere 404
|
Registered: 06/24/2010 Posts: 37 |
I put a 55 series exhaust manifold on it the built small wedges to but under the water manifold it laid the water manifoild love everything cleared really nice |
Re: John deere 404
|
Registered: 09/10/2009 Posts: 54 |
Highmanor any chance you can build me set of those wedges? Started to put a bigger turbo on a 4430 last summer and found out I needed what you built, |
Re: John deere 404
|
Anonymous User
|
i would run 7810 exhaust manifold and throw away the thermostat housing put a flat plate to front of head drill hole in center and weld a 1 1/2 barb fitting in there and i run a electric water pump from jegs and it works great i mount water pump just on front of block and use a flat plate there also with short hose i can text u pic if you are interested. |
Re: John deere 404
|
I would like to see the pictures. You want a phone numbet or e-mail? |
Re: John deere 404
|
ws721
|
Youre in way to deep if youre gona run electric water pump. But it would work. Still get beat by Sally |
Re: John deere 404
|
Anonymous User
|
yes send me a pm with either one and i will share some pic of my two tractors |
Re: John deere 404 thermostat
|
Have a problem locating the thermostats in our john Deere 404 motor on the boat. Has anyone had a need to replace one and know where it's located on the engine? Thanks. |
Re: John deere 404 thermostat
|
The thermostat is at the aft end of the engine, under the rectangular tank that has the rad cap on it |
Website Statistics
Global: Topics: 38,576, Posts: 229,605, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,857.
Global: Topics: 38,576, Posts: 229,605, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,857.
Our newest member BadHabit2