Farmstock 1206 April 27, 2016 01:46PM
Hello guys looking for some information on Farmall 1206 I'm wanting to pull Farm stock classes and still farm with this tractor wanting to know if a 3lm 373 would be a good choice as I'm being told 3lm 466 will be hard to keep lit when fall below a certain RPM with the 361. And I want to pull both farmstock transfer and dead weight classes as well as farm still. Any feedback would be greatly appreciated. I'm running the stock solar right now
Reply Quote

Re: Farmstock 1206 April 27, 2016 02:24PM
I'd recommend an S300 instead of the 3LM. Will give you a bit more air and will be a lot more reliable in the field. If you want to get rid of that Solar id be interested.
Reply Quote

Re: Farmstock 1206 April 28, 2016 04:57AM
Holset HX-40
Reply Quote

Re: Farmstock 1206 April 28, 2016 05:00AM
Hx40. How do they do in the field
Reply Quote

Re: Farmstock 1206 April 29, 2016 12:56AM
Better than a 3LM
Reply Quote

Re: Farmstock 1206 May 02, 2016 11:26AM
Quote
Brandon Holcomb
I'd recommend an S300 instead of the 3LM. Will give you a bit more air and will be a lot more reliable in the field. If you want to get rid of that Solar id be interested.

Which s300, there's so many models, housings ect....?
This one?
Borg Warner S360 S300SX3 S300 60/68 177272
Reply Quote

Re: Farmstock 1206 May 02, 2016 11:31AM
Yes I'd like to know as well IHfarmer07. I ran the s366 on my case and the s362 I likeed the 362 over 366 but I was also 504 cubes verse small 361
Reply Quote

Re: Farmstock 1206 May 02, 2016 11:50AM
Quote
TeachersPet
Yes I'd like to know as well IHfarmer07. I ran the s366 on my case and the s362 I likeed the 362 over 366 but I was also 504 cubes verse small 361

And also on the hx40 too...
Maybe this one??NEW OEM Holset HX40 Turbo Diesel Trucks Cummins 6CT 8.3L Engine 4035235 Turbo
This is the only one that can be workable if a person made the exhaust piece that goes through the hood and it falls in a good hp range, 175-350.
CI maybe an issue on a 361, but depends on exhaust housing sizes, holset recommends 7-10L engines for an hx40
Reply Quote

Re: Farmstock 1206 June 24, 2016 02:03AM
I am looking for an HX 52, do they make one with a T4 flange and .91 housing? I am having trouble locating one. they either have a T3 or they are T4 with a .88 housing. it is going on a 466 open rpm.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,605, Posts: 229,657, Members: 3,323.
This forum: Topics: 37,062, Posts: 225,884.

Our newest member JD_8520