How much water?? July 01, 2016 01:39AM
Just finished a 504 case, 700cc p pump, gt 42 turbo, Intercooler, open rpm. What's a good starting amount of water? Thanks
Reply Quote

Re: How much water?? July 01, 2016 01:22PM
3 oz per sec
Reply Quote

Re: How much water?? July 01, 2016 01:38PM
If you are running an intercooler you won't need a lot of water I'd say start out with 50-60 oz be on the safe side you can always take some away
Reply Quote

Re: How much water?? July 01, 2016 04:17PM
Ok that's more than I would have thought with a cooler, im putting it in the intake tube from cooler to engine, using enderle nozzles, what's the min amount of nozzles I can use?



Edited 1 time(s). Last edit at 07/01/2016 04:25PM by 970 case lss.
Reply Quote

Re: How much water?? July 02, 2016 02:01AM
I pull a jdsb open rpm p pump 3x3 charger,i set my water up at 32oz in 12 sec.egts at end of pull are 1250 to 1400 before turbo,set to come on at 25lb boost.works very well..no cooler now,i think with cooler will cut that back a little.
Reply Quote

Re: How much water?? July 02, 2016 09:42AM
Perfect, thank you all for the help!! And thanks Morgan's for a great site!!
Reply Quote

Re: How much water?? July 02, 2016 12:50PM
It depends on ur cooler how fast u move the water threw it ect.
Cut ur water in half from what u used without a cooler and monitor ur exhaust temp to fine toon.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,571, Posts: 229,597, Members: 3,319.
This forum: Topics: 37,057, Posts: 225,853.

Our newest member BadHabit2