Water injection hose's July 25, 2016 01:57PM
What type of hose do most of you use on your water injection systems. I will be running water and methonal and I'm afraid it might hurt regular hose. Thanks for any advice

Re: Water injection hose's July 25, 2016 04:05PM
U need steal braided hose to hold the high psi and the methonal. We use steal braided on are super farms with just plain water and pump lube.

Re: Water injection hose's July 25, 2016 09:01PM
Castner has really nice pressed braided lines made up. Nice guys to deal with

Re: Water injection hose's July 26, 2016 01:22AM
Do you have a number for them?

Re: Water injection hose's July 26, 2016 04:28AM
Just got to your local 'Ritter engineering' or 'Parker' store they will make your whatever you want

Re: Water injection hose's July 26, 2016 04:59AM
Ross Castner (315) 730-4469 Mike Castner (315) 694-2522 Pre made hoses can be bought from jegs or summit but if your new to this a little direction from a builder might be a good idea!

Re: Water injection hose's July 26, 2016 04:53AM
Braided brake line works just fine. Buy it right off the shelf

Re: Water injection hose's July 26, 2016 05:10AM
Always just use 3 or 4 an steel braided brake lines. Www.speedwaymotors.Com has them in many different lengths.

Re: Water injection hose's July 26, 2016 09:09AM
We had to go to Hyd. 4000 PSI line, braided stainless lines could not take the pressure of the pump. Wish we could've found stainless to take the pressure but could not, sure they are available somewhere, but needed them now!

Re: Water injection hose's July 26, 2016 02:01PM
Try grease gun hoses! 1/8 pipe threads, various lengths, work great with high pressure!

Re: Water injection hose's July 26, 2016 03:57PM
Did the grease hoses first year out. Went to different nozzles and needed a different hose. Using high pressure hyd lines now.

Re: Water injection hose's July 27, 2016 12:49AM
Pre-Assembled Brake, Nitrous & Gauge hose from Aeroquip. Made from braided teflon line. Can get with either straight or 90 degree bends on each end. From a length of 10" up to 50" length. They are pressure tested at 4,000 psi after being assembled at Aeroquip.



[www.ulmerracing.com]

Re: Water injection hose's July 27, 2016 01:22PM
It has hyd hose now but the fittings seem to rust and plug up the nozzels.

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,565, Posts: 229,582, Members: 3,319.
This forum: Topics: 37,056, Posts: 225,843.

Our newest member BadHabit2