07:33:04pm, Tuesday, April 16, 2024
|
D312 d360 crank
|
Hello, I am wanting to put a d360 ag crank in my 666 ih. It will be a n/a puller. I have the 312 engine already with flywheel. I am wondering if the 312 flywheel will work for the 360 crank? I am not going to be spinning more than 2800rpm (class rules). I would use the stock 360 flywheel, but it will not fit in the bell housing as I understand. |
|
Re: D312 d360 crank
|
Registered: 04/09/2016 Posts: 8 |
The 312 flywheel will bolt right up to your 360 crank |
|
Re: D312 d360 crank
|
Awesome, another question, when running 4 1/8" bore pistons, if I run them with the 360 crank, do you guys use the truck 360 rods? Or should I just do the 312 crank and 4 1/8" pistons? |
|
Re: D312 d360 crank
|
please
|
If it's going to be a puller then please just spend a little extra money and put a steel flywheel in. it's really cheap insurance to make sure that nobody gets hurt from a cast flywheel coming apart. |
|
Re: D312 d360 crank
|
Registered: 04/12/2008 Posts: 398 |
I have a set of nice 4.125 IH pistons from a 361. I am also interested in your 312 crankshaft. Call or text 608-317-7321. Thanks. |
|
Re: D312 d360 crank
|
B powell
|
I've got a d360 crank, would be willing to do some trading for the 312. Let me know
Call or text (502) 773 7505 |
|
Re: D312 d360 crank
|
lewis
|
J and J sales has a new old stock 312 crank for ether 300 or 500 dollars I believe 300,And you cant use the dt 360 rods with the 312 or the 360 the tractor has a 3 inch rod jouranel the truck is a 21/2 also the tractor block is a couple inches taller |
|
Re: D312 d360 crank
|
In need
|
What's the number for J and J Lewis? Looking for a 312 for a project |
|
Re: D312 d360 crank
|
Lewis
|
The number is 270 651 5480 Glassgow ky ask for Eddie long in parts I think he still works there |
|
Re: D312 d360 crank
|
Registered: 12/14/2014 Posts: 11 |
I have a 312 long block (crank,block,head,rods,Pistons,cam)I would sell.
Call me if interested seven four zero three one zero two two two seven. Thanks |
|
Re: D312 d360 crank
|
As I understand your concern for safety, it is definitely in the planning, but didn't know for sure. I'm not really willing to part with the 312 crank yet, but may be interested in some pistons from the 361. I see that the 312 stroke is very close to the 361, so I am wondering of you could just use those pistons for the 312? Could a guy just mill the tops of the pistons? |
|
Re: D312 d360 crank
|
What is the compression distance of the 806 pistons vs the d312 and d360? |
|
Re: D312 d360 crank
|
.02
|
Case pistons work a little better. |
|
Re: D312 d360 crank
|
Do you mind sharing some info? |
|
Re: D312 d360 crank
|
Lewis
|
I'm a parts dealer through Howard enterprise figure out what you want and let me no I will give you a real good deal I can tell you if the case pistons will work they will be cheaper the 361 and 407 parts are high I sell to pullers at just a little over cost and can have the parts shipped direct 270 566 2901 |
Website Statistics
Global: Topics: 38,565, Posts: 229,582, Members: 3,319.
This forum: Topics: 37,056, Posts: 225,843.
Global: Topics: 38,565, Posts: 229,582, Members: 3,319.
This forum: Topics: 37,056, Posts: 225,843.
Our newest member BadHabit2
