AC 301 cam January 19, 2017 10:25AM
looking to see who makes a good cam for AC 301. Farm class max cubes 407 and 2800 rpms. thanks
Reply Quote

Re: AC 301 cam January 19, 2017 11:22AM
I had mine built buy nolimits. I am very happy with how it performes. Best thing is to get the most info on your cylinder head than they can match it up better.
Reply Quote

Re: AC 301 cam January 20, 2017 01:30PM
Is this gas or diesel? If you go with a roller I would say nolimits. If it's a flat tap then vogel be the best. Roller takes some doing. Riverside has lifters or can use chevy lifters from crower. With out stroking 405 would be the biggest that's 4.5" bore I heard of a 414ci but ran strong but but not for long
Reply Quote

Re: AC 301 cam January 19, 2017 12:27PM
As far as i know You won't get 407 with a 301. Are you allowed to decube? Be a lot easier to take a 426 down to 407 then the 301.k
Reply Quote

Re: AC 301 cam January 19, 2017 02:02PM
Vogel Manufacturing will regrind your stock cam very reasonable , be sure to use one with bolt in end. He will help you with the grind,you shouldn't need a billet at that rpm,call now it will take 2-3 months to get. 406 is the biggest turbo built I know of. An h1e holset would be a nice fit if you can run a turbo.
Reply Quote

Re: AC 301 cam January 23, 2017 05:48AM
Thanks for the support.

I would just like to add that we do flat tappet, and roller regrinds, as well as make billet camshafts. We also regrind flat tappet lifters, as well as can manufacture them from scratch for high spring pressure/ high rpm applications.

AC7000, for this application I would recommend just a regrind.

If your still looking give us a call.

Our lead times usually run around 2 weeks on regrinds, and 4-5 weeks on billets.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,578, Posts: 229,609, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,859.

Our newest member BadHabit2