2017 River Falls FFA Alumni Pull - July 15th April 10, 2017 03:42PM
River Falls FFA Alumni Truck and Tractor Pull - July 15th 2017


WTPA Sanctioned Classes

Light Limited Super Stock
Super Farm
Light Pro Stock

[www.wtpapull.com]

FFA Alumni Classes

Farm Stock Non Turbo

7,500 - 75 Factory rated horsepower (5 mph) Max Tire - 18.4x38

9,000 - 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38

Farm Stock Turbo

11,000 - 8 mph

12,500 - 8 mph

14,000 - 8 mph

Light Open - 3x3 Charger Diesel Only

6500

Heavy Open

8500

9500

Improved Farm - Turbo Maximum of 2.8” inlet by 3” outlet

11000

11500

Pro Farm - Maximum 3x3 turbo

10500

11000

Diesel Trucks

8,500 Stock

8,500 Hot Street

8,000 Open

All classes $30 per hook (Excluding NTPA)

Track Patrol Sleds

NEW THIS YEAR

Class line up set 30 min prior to start of class Please register on time.
Classes stated above are final for the event. NO CLASSES WILL BE ADDED
More Bleachers
More Parking
More Port-a-potties
Bigger spectator area
More lights

For further information contact:

Ryan Joy 715-821-7676
Pete Lubich 715-821-7800

[www.riverfallsffaalumni.org]

Directions

[www.google.com]

More info to come along with starting time, payouts, class order, etc.
Attachments:
open | download - 2017 Truck and Tractor Pull Classes.pdf (436.8 KB)

Re: 2017 River Falls FFA Alumni Pull - July 15th April 11, 2017 05:32AM
Why no 7500 pound heavy and lite? You had it last year? Thanks

Re: 7500 Class April 11, 2017 04:36PM
Last year there was 5 tractors in the 7500 Light Open and 2 tractors in the 7500 Heavy Open. It was our understanding that the tractors that pull in the 7500 Light Open normally pull in the WTPA Light Limited Super Stock Class. As far as the tractors in the 7500 Heavy Open, we would have them pull in the FFA Alumni 8500 Heavy Open. With having the WTPA Classes this year we had to eliminate a few of the FFA Alumni classes to get the show done at a decent time. We know theres going to be some confusion so thats why we wanted to get info out this early. Sorry for any confusion that this change will create. We are interested in any input we can get. Email link below with input. All input is welcomed

FFA Email Address:

rf.ffa.alumni@gmail.com

For more info:

Ryan Joy 715-821-7676
Pete Lubich 715-821-7800



Thanks - River Falls FFA Alumni

Re: 7500 Class April 12, 2017 03:26AM
1 of those tractors pulled with WTPA in the LLSS class 4 or 5 times last year. It will be great to have those other 4 in the LLSS class this year. You could have more in your 6500 open class if alcohol wasn't banned.

Re: 7500 Class April 12, 2017 05:56AM
So the open class is not really openConfused

Re: 7500 Class April 12, 2017 06:36AM
Due to the turbo rules I can not run the 6500 pound open class, and 8500 open is to heavy for my chassis!

Re: 7500 Class June 28, 2017 11:22PM
Correction, none of those tractors pull NTPA.

Re: 2017 River Falls FFA Alumni Pull - July 15th May 24, 2017 09:20AM
52 days to get those tractors ready!

Re: 2017 River Falls FFA Alumni Pull - July 15th May 29, 2017 03:49AM
Why don't you run improved and pro farm together? Just call it the 20.8 class...

Re: 2017 River Falls FFA Alumni Pull - July 15th May 29, 2017 06:09AM
No 5500 0r 6500 farm stock?

Re: 2017 River Falls FFA Alumni Pull - July 15th May 29, 2017 02:28PM
Why don't you run improved and pro farm together? Just call it the 20.8 class...

We decided to keep the 2.8 and Pro Farm class separate again this year based off the number of hooks in each class last year


No 5500 0r 6500 farm stock?

There will be an antique tractor pull on Sunday July 16th...more info along with classes to follow: Contact Pete for more info on the Antique Pull


Pull Info

The class line up will be coming shortly....just a reminder that the pull will start on time this year with both sleds going and WTPA will start at 7pm and once the WTPA classes are done we will jump right back into the FFA Alumni pull

For more info:

Ryan Joy 715-821-7676
Pete Lubich 715-821-7800

2017 Pics June 27, 2017 03:39PM
Here is pics from 2017 Pull!!


Re: 2017 Pics June 27, 2017 03:40PM
2016 Pics not 2017!

Re: 2017 River Falls FFA Alumni Pull - July 15th June 30, 2017 05:07PM
Here is some more information about pulling in River Falls. Saturday July 15th, and Sunday July 16th. The FFA also would like to Thank all our great sponsors!
Questions about this years event?
Call
  • Ryan Joy 715-821-7676 (FFA Pull Tractors)
  • Cody Hakes 715-338-4603 (FFA Trucks)
  • Pete Lubich 715-821-7800 (Sunday Pull)
Attachments:
open | download - SCVCA 2017 Tractor Pull Flyer[8854].pdf (19.9 KB)
open | download - Poster 8.5x11_2017.pdf (588 KB)

Pics of New Fence July 02, 2017 02:58PM
Here are some updated pics of the pull grounds!!


2017 River Falls FFA Alumni Pull - July 15th July 08, 2017 03:50PM
Your probably wondering how much you can make if you win in River Falls July 15th???
Here are our payouts attached.
Hope to see you there!!!!




Edited 1 time(s). Last edit at 07/08/2017 03:51PM by River Falls FFA.
Attachments:
open | download - 2017 Pull_Payouts_7-8-17.pdf (356 KB)

Safety Equipment - Please Read July 09, 2017 03:22PM
Here are the Safety Equipment Rules required per our insurance....we have a new insurance company this year and the Safety Rules below have to be enforced.

Anyone pulling Improved Farm BRING HELMETS!!!!

Thanks in advance

River Falls FFA Alumni


General Safety Equipment (Required for Light Open, Heavy Open, and Pro Farm Classes)

All tractors must be equipped with the following safety equipment:

Steel flywheel, SFI approved scatter blanket, wheelie bars with bumpers strong enough to support weight of tractor, fenders, kill switch, 2.5lb fire extinguisher, SFI approved roll cage, side shields and a second shutoff at the pump. Must have a spring-loaded throttle that returns to idle. Must have a 3 way dump valve a head of the injection pump operated by a cable.

SFI approved fire suit, helmet, gloves, shoes, and five-point harness required.

Electric fans are required. Stock engine driver fans are not allowed.

A signed driver statement required for flywheel.

Improve Farm Classes

Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate.

SFI approved helmet is required.

Steel flywheel and SFI approved scatter blanket required

Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle.

Must have side shields if running a belt-driven fan. An electric fan is preferred.

Class Order July 09, 2017 03:36PM
Here is the class order for the pull

The pull will start at 530 with the WTPA starting at 7pm

We will be running just the one sled (Red Sled) during the WTPA Pull

Blue Sled

7500 Farm
9000 Farm
Break: 7pm (WTPA Pull)
8500 Stock Diesel Pickup
11000 Farm
12500 Farm
14000 Farm

If your pulling in 7500/9000 Farm be there and ready to pull by 530pm as were going to pull both these classes before the WTPA Pull at 7pm

Red Sled

6500 Open
WTPA (7pm)
8500 Hot Street Pickup
8500 Open
11000 Improve Farm
10500 Pro Farm
8000 Open Diesel Pickup
9500 Open
11500 Improve Farm
11000 Pro Farm

If your pulling in 6500 Open be there and ready to pull by 530pm as were going to pull this class before the WTPA Pull at 7pm


Please be on time

Thanks River Falls FFA Alumni

Questions

Ryan Joy 715 821 7676
Pete Lubich 715 821 7800

Cody Hakes 715 338 4603 (Trucks)

Tractor Rules July 11, 2017 03:03PM
River Falls FFA Alumni

July 15th 2017 Tractor Pull Rules

Tractor General Rules

1. Be a Professional. Must have tractor registered before class starts. No exceptions made. Can call ahead of time to get registered if your tractor is arriving late.

2. Pullers must be 18 years of age or older to participate. Minors must have parent or Guardian consent forms signed. No one under the age of 18 will pull outside the Farm Stock Classes. No one younger than 12 years of age will be allowed to pull.

3. All pulls will be made from drawbar. The hitch height must not exceed 20 inches. All pullers must furnish their own twisted clevis or a 3” hoop hole. Clevis must be fastened to the drawbar with a 3/4” or larger bolt and safety pin.

4. No weights hanging directly above the draw bar. Must have 12” opening for the hook-up to the sled.

5. One fuel type only. Alcohol maybe used as fuel in open classes only.

6. Pulling order will be determined randomly by draw.

7. Operator must remain seated and drive in a safe manner.

8. Tractors must operate in a safe manner at all times. No chain jerking or hot-rodding Allowed.

9. All tractors must be in neutral or park when being hooked or unhooked from sled.“Hands up” signal by the driver will be used to indicate this is being followed.

10. Tractor must remain within the boundaries of the track. Failure to do so will result in Disqualification.

11. Tractor must be occupied while it is running.

12. Loss of any weight or part of the tractor will be grounds for disqualification.

13. All pulls must start with a tight chain and be straight in-line with the sled.

14. All drivers pull at their own risk. River Falls FFA Alumni, Total Excavating and Deiss Storage shall not be held responsible for any accident, injuries or damage to equipment.

15. Class pulling order and drivers order will be posted.

16. Tractors will be stopped if front wheels are more than 24” off the ground.

17. All tractors must scale prior to hooking to sled, immediately prior to the start of your Class. 200lbs grace over printed class weight. Once weighed, you are staged. Leaving the staging area is not allowed.

18. NO BEER OR ALCOHOL TO BE CONSUMED FOR CONTESTENTS!!!!

19. Track officials have the right to move a puller to a different class.

20. The first puller has no option of a re-hook. Only chance to re-hook is if the sled has adjustments made to it.

21. In the speed limit classes, the puller has 100 feet to adjust his speed, after 100 feet any time of exceeding the speed will result in disqualification.

22. Violations of any rule shall constitute a disqualification. Arguing with judges will not be Tolerated, and will result in immediate disqualification.

23. ALL GENERAL RULES APPLY TO EVERY CLASS!!!

24. All JUDGES’ DECISIONS ARE FINAL!!! Failure to obey track officials will result in Disqualification and may lead to removal from event.


General Safety Equipment (Required for Light Open, Heavy Open and Pro Farm Classes)

1. All tractors must be equipped with the following safety equipment:

2. Steel flywheel, SFI approved scatter blanket, wheelie bars with bumpers strong enough to support weight of tractor, fenders, kill switch, 2.5lb fire extinguisher, SFI approved roll cage, side shields and a second shutoff at the pump. Must have a spring-loaded throttle that returns to idle. Must have a 3 way dump valve a head of the injection pump operated by a cable.

3. SFI approved fire suit, helmet, gloves, shoes, and five-point harness required.

4. Electric fans are required. Stock engine driver fans are not allowed.

5. A signed driver statement required for flywheel.

6. Safety equipment and other components must be made available for inspection upon request of judges and upon protests.

Farm Stock

7500 non-turbo 75 Factory rated horsepower (5 mph) Max Tire – 18.4x38

9000 non-turbo 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38

11000 turbo 8 mph

12500 turbo 8 mph

14000 turbo 8 mph


1. ALL GENERAL RULES APPLY

2. Must have OEM block, fuel system, frames, hoods, drawbar, seats, grills, and front end.

3. Cut tires not allowed.

4. Tractors must have working hydraulics and PTO.

5. Water injection not allowed.

6. Fuel source must be factory to make and model. If it’s a diesel it’s still a diesel.

7. Add on turbo’s: Factory and M&W Turbo’s allowed in all turbo classes. Must be installed in a stock appearing manner.

8. Any tractor with a blower internal or external will pull in a turbo class

9. Turbo Tractors: all oil lines, exhaust systems and intake tubing must fit in a total stock manner and must be installed on tractor in order to compete. Stock air cleaner housings and correct plumbing required. Air filter elements not mandatory.

10. 2800 RPM maximum for Turbo Classes and factory stock RPM set by the Nebraska Test Book for Non Turbo Classes. If tractor is not listed, 2000 RPM will be used as a base.

Light Open
6500

1. ALL GENERAL RULES APPLY

2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED

3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol not allowed.

4. Restricted to a max 3x3 single turbo.

5. Max tire size of 24.5 x 32

Heavy Open
8500 9500


1. ALL GENERAL RULES APPLY

2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED

3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol allowed.

4. Can use multiple turbos.

Improved Farm
11000 11500 (Turbo Maximum of 2.8” inlet by 3” outlet)

1. ALL GENERAL RULES APPLY

2. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate.

3. SFI approved helmet is required.

4. Steel flywheel and SFI approved scatter blanket required

5. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle.

6. Must have side shields if running a belt-driven fan. An electric fan is preferred.

7. No Injection pumps larger then an A Pump unless a P Pump came installed as OEM.

8. No cut tires allowed. 20.8 x 38 MAXIMUM

9. 3800 RPM limit.

10. Water injection is allowed.

11. 466 Block. Factory intake and exhaust manifolds. Driveline, transmission, rear axle, frames, front axles and sheet metal must match model of manufacturer.

12. Must have working PTO or hydraulics. No Slots or slug Turbo. No inner or after coolers.

Pro Farm
10500 11000 (Maximum 3x3 turbo)


1. ALL GENERAL RULES APPLY

2. No block larger then 540” Cubic Inch OEM to tractor

3. 466” Cubic Inch or less is allowed a max of a 3x3 turbo. Over 466” Cubic Inch max 2.8 x 3” Turbo.

4. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate.

5. SFI approved helmet is required.

6. Steel flywheel and SFI approved scatter blanket required

7. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle.

8. Must have side shields. An electric fan is required.

9. No larger then P Pumps Allowed

10. Cut tires allowed. 20.8 x 38 MAXIMUM

11. No RPM limit.

12. Water injection is allowed.

13. Driveline, transmission, rear axle, and sheet metal must match model of manufacturer.

14. No Slots or slug Turbo. No inner or after coolers.

15. Factory OEM Intake and Exhaust manifolds.

Truck Rules July 11, 2017 03:11PM
River Falls FFA Alumni
July 15th 2017 Truck Pull Rules

TRUCK GENERAL RULES


1. Be professional. Must have truck registered before class starts. No exceptions made. Can call ahead of time to get registered if your truck is arriving late.

2. Pullers must be 18 years of age or older to participate. Minors must have parent or guardian consent forms signed. No one younger than 16 years of age will be allowed to pull.

3. Maximum height of hookup and pulling point cannot exceed 26” to hooking point. Hooking point must have 3” opening

4. No weight can extend more than 60” forward from the centerline of the front axle.

(for classes that apply)

5. All trucks MUST have working brakes.

6. Drivers must wear a seat belt or restraint system. No passengers allowed. Failure to do so will result in disqualification.

7.Pulling order will be determined randomly by draw.

8. Operator must remain seated and drive in a safe manner.

9. Trucks must operate in a safe manner at all times. No chain jerking or hot-rodding allowed.

10. All trucks must be in neutral or park when being hooked or unhooked from sled. “Hands up” signal by the driver will be used to indicate this is being followed.

11. Truck must remain within the boundaries of the track. Failure to do so will result in disqualification.

12. Truck must be occupied while it is running, failure to do so will result in disqualification.

13. Loss of any weight, part of the truck or if the doors or hood open while pulling will be ground for disqualification. Becoming disconnected from the sled while pulling will result in disqualification.

14. All pulls must start with a tight chain and be straight in-line with the sled.

15. All drivers pull at their own risk. River Falls FFA Alumni nor Total Excavating shall be held responsible for any accident, injuries, or damage to equipment.

16. Class pulling order and drivers order will be posted.

17. All truck must scale prior to hooking to sled, immediately prior to the start of your class. 200LB grace over printed class weight. Once weighed, you are staged. Leaving the staging area is not allowed. Hitch height will be measured at weigh in.

18. NO BEER OR ALCOHOL TO BE CONSUMED FOR CONTESTENTS!!!!

19. Track officials have the right to move a puller to a different class.

20. The first puller has no option of a re-hook. Only chance to re-hook is if the sled has adjustments made to it. So make it count!

21. Violations of any rule shall constitute a disqualification. Arguing with judges will not be tolerated, and will result in immediate disqualification.

22. ALL GENERAL RULES APPLY, UNLESS CLASS SPECIFIC

23. ALL JUDGES’ DECISIONS ARE FINAL!!! Failure to obey track officials will result in disqualification and may lead to removal from event.


8000lb Open Diesel

1. All general rules apply, along with class specific rules.

2. Trucks are highly recommended to have a Fuel/air shut off and Driveshaft loops.

3. 35-18.00-15 Bar and Cut tires permitted.

4. A fire extinguisher system is permitted and highly recommended.

5. OEM Firewall is mandatory.

6. The complete OEM floor pan is mandatory.

7. The body must be OEM truck body. The body must retain full sheet metal, after-market hoods are permitted. The hood must be closed and securely latched while vehicle is hooked to the sled.

8. D.O.T. approved helmet required to be worn while pulling.

9. All open class trucks must have SFI approved bell housing on clutch, SFI approved shield on transmission body, SFI flex plate, SFI approved damper, SFI fire extinguisher mounted within reach of driver and SFI approved fire jacket.


8500lb Hot Street Diesel

1. General rules apply, along with class specific rules.

2. Trucks are highly recommended to have Fuel/air shut off and Driveshaft loops.

3. Must be Dot approved tire. Maximum height 35 inches.No studded tires or chains. No alterations to tires permitted. No bar or terra tires. No duals unless factory OEM equipped.

4. A fire extinguisher system is permitted and highly recommended.

5. The complete OEM floor pan is mandatory.

6. The body must be OEM truck body. The body must retain full sheet metal, after-market hoods are permitted. The hood must be closed and securely latched while vehicle is hooked to the sled

7. Truck must be street legal [headlights, tail lights,bumpers, ex. ] registered and insured.

8. Hanging weights will be voted on at drivers meeting, majority rules.

9. Diesel fuel only, no injectables (nos, meth, propane).

10. No hood stacks.

11. Suspension stops/ blocks are allowed, along with use of air bags.


8500lb STOCK Diesel

1. General rules apply, along with class specific rules.

2. Must have hood, fenders, doors, windshield, rear window.

3. No hanging weights allowed, bed of truck only.

4. Diesel fuel only, no injectables (NOS, water/meth, propane).

5. No ladder bars, No track bars.

6. STOCK single turbocharger (unless factory equipped i.e. 6.4 Ford Powerstroke).

7. Use of a singe tuner is allowed.

8. No lift pumps allowed.

9. No Hood stacks.

10. Max tire height is D.O.T. approved 35” tire.

11. Air bags allowed but cannot be inflated. No suspension stops/ blocks.

12. Trucks must be street legal, registered and insured.

13. After-market intake is permitted.

14. Stock Fuel system, no oversized injectors, cp3, HPOP.

Improve Farm: Please Read July 12, 2017 03:45PM
Improve Farm Classes:

We have been getting a lot of phone calls on the block/cubic inch rule.....so to clarify, tractors must have a 466 block. Anything bigger then a 466 block for example 531, 619, 640....won't be able to pull in the Improve Farm Class and would have to run Open. I hope that is clears up any confusion

Also please remember on this class the safety rules as we are required to enforce them this year per are insurance policy

Thanks

River Falls FFA Alumni


Improved Farm
11000 11500 (Turbo Maximum of 2.8” inlet by 3” outlet)


1. ALL GENERAL RULES APPLY

2. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate.

3. SFI approved helmet is required.

4. Steel flywheel and SFI approved scatter blanket required

5. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle.

6. Must have side shields if running a belt-driven fan. An electric fan is preferred.

7. No Injection pumps larger then an A Pump unless a P Pump came installed as OEM.

8. No cut tires allowed. 20.8 x 38 MAXIMUM

9. 3800 RPM limit.

10. Water injection is allowed.

11. 466 Block. Factory intake and exhaust manifolds. Driveline, transmission, rear axle, frames, front axles and sheet metal must match model of manufacturer.

12. Must have working PTO or hydraulics. No Slots or slug Turbo. No inner or after coolers.

Re: 2017 River Falls FFA Alumni Pull - July 15th June 28, 2017 12:21PM
that would be like having a farm tractor in that class can t catch them.

Re: 2017 River Falls FFA Alumni Pull - July 15th July 16, 2017 03:58AM
Any results from last night? Curious about the WTPA lite pro class specifically

Re: 2017 River Falls FFA Alumni Pull - July 15th July 17, 2017 02:25AM
WTPA Light Pro results from River Falls 1st Alan Cook Black Thunder, 2nd Duane Bauer Beaver Hunter Reloaded, 3rd Kurt Afdahl Weekend Mistress, 4th Ryan Lynn Crazy Horse, 5th Chad Webster Workin Girl

Stolen Weights - Please Return Them July 17, 2017 03:40AM
There was 8 IH weights stolen off a IH 560 and IH 686 that was parked and left at pull site overnight!! The weights had two black paint marks over the handle of the weights. Please be respectful and return the weights to the pull site!!

Thanks

Ryan

Thanks Everyone!! July 18, 2017 04:26PM
The River Falls FFA Alumni would like to thank everyone that came to the River Falls Day Pull! Thank you fans, pullers, promoters, and sponsors!!!

Thank You to Total Excavating - Chris Kusilek for making this location happen! Chris did an awesome job with the site preparation and the track was once again awesome!

Thank You to Kurt Afdahl with the WTPA for making the WTPA pull happen this year!! Kurt did an awesome job in helping get the WTPA to come to River Falls for the first time ever this year!

Again a huge Thank You to both Chris Kusilek and Kurt Afdahl!!!!


2017 River Falls FFA Alumni Sponsors

Total Excavating
WTPA
Value Implement
Compeer Financial
Concrete Concepts and Construction
Minnesota Ag Group - Hastings
Fuel Lift
Kinni Sports and Power
Mel's
Steiner Plumbing Electric Heating Inc
South Fork Cafe
Winfield United
Darrel's Septic Service
Devine Liquor
Countryside Coop
Deiss Storage Systems
Dicks Hometown Liquor
RCD
Western Wisconsin Ag Supply
First National Bank River Falls
Stunzya
Hanson Construction
Kwik Trip
Plumber Concrete
River Falls State Bank
Emmas Bar
Xcel Energy
Atlas Tractor
Glass Express
Reis Insurance Agency
Ace Ethanol
Advanced Auto Care
Alpha Gamma Rho Fraternity
Auto Value
Bernard of River Falls
C&J Builders
Advanced Auto Parts
Comfort Plus Insulation
Dorwin Farms
Freeman Drugs
H&F Home Furnishings
Hove Auto Body
Dairy Queen
Hub 70 Design and Print
Johnson Quality Plumbing
Kinnic Veterinary
Leith Insurance Agency
O'Reilly Auto Parts
Pechacek's General Contracting
Reliance Electric Motors
River Falls Mutual Insurance
River Falls Tire
Security Financial Bank
Smith Sales
St Croix Tax
Steel Town
Westconsin Credit Union
Ace Hardware
Express Lube and Rental
American Family Insurance - Jill Morrow
Frontier Ag Turf – New Richmond
BP of River Falls
Munson Hybrids
Channel Seeds – Keith Gunderson
Pioneer – Chris Edgar
Nexgrow
Best Built Fence Company
Bauer Built
Max 104.9 FM
Mainstreeters
Henkel
Veterans
Royal Credit Union
Our Town Has It
Air Motion Systems Inc
Fair Valley Performance
Main Street Family Dental
O’Keefe Inc
Principal Preservation Services
Servant of the Shepherd Church
Shannon Crop Services
Sweeds Service
Unline
Keyes Chevytown
Dream Wolf Expressions
River Guide Kayaks
O’Malley Custom Ag
Next Level Events
Ziegler Cat
Guy Jensen
Goodwin Farms
Ross Associates
Scott Spiegelberg

We would like any feedback we can get to better help our FFA Alumni improve things for next years pull! Any feedback we can get would be greatly appreciated!

For Pull Feedback Contact Below: Thanks!!

Text

Ryan: 715 821 7676
Keith: 715 684 9241

Email:

rf.ffa.alumni@gmail.com

Thanks again for all of the support!

River Falls FFA Alumni

Re: Thanks Everyone!! July 18, 2017 11:30PM
looked to me that the Sunday pull was cheated by not being included with the Saturday session,no spectators and fewer tractors. Just an observation,am sure that the people there Sunday would have enjoyed the show Saturday evening,I would have !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Results August 01, 2017 04:27PM
2017 River Falls Days Tractor Pull Results

7500 Non Turbo

Mike Filkins 341.1 International 686
Aaron Vadner 341 Farmall 560
Kim Spaeth 316.9 John Deere 3020
Randy Ciolkosz 314.7 International 666
Adam Birr 308.9 MM 670
Landon Laher 265.7 John Deere 3020
Mitch Filkins 258.1 International 560
Donald Hershaw 235.3 Oliver 950

9000 Non Turbo

Adam Birr 298.9 Ford 7810
Jason Maier 279.9 John Deere 4020
Curt Peine 275.1 John Deere 4020
Kory Pechacek 268.7 John Deere 4000
John Langer 266.3 International 806
Roman Huppert 264.8 John Deere 4020
Mike Peine 264.8 John Deere 4000
Rick Peine 263.1 John Deere 4020
Abe Rohl 259.3 John Deere 4020
Ryan Pechacek 256.3 John Deere 4000
Travis Rohl 253.3 John Deere 4010
Butch Reinhardt 241.6 International 966
Mike Filkins 237.1 International 686
Bobby Ciolkosz 234.3 International 666
Jim Kaczmarek 231.9 John Deere 830
Donald Hershaw 184.5 Oliver 950
Paul Dombrock 179.9 Case 930

11000 Turbo

Max Geraets 372.2 Ford 8600
Tyson Rohrscheib 368.1 International 1466
Jeff Johnson 367.2 AC 7000
Ben Peterson 336.1 International 1066
Cody Frederick 333.5 International 1066
Brian Benoit 314.8 International 1256
Connor Biesel 294.2 International 1066
Andy Birkel 280.8 John Deere 4430
Dominic Harris 275.5 International 1466
Phil Rohl 271.6 John Deere 4010
Jim Anderson 253.8 John Deere 4020
Mike Huppert 227.7 International 1066
Cody Jones 221.2 International 1206
Cole Marek 207.5 John Deere 4020
Corey Deiss 174.1 International 966
Gary Deiss 156.9 AC 7000

12500 Turbo

Kaylin Spaeth 347.9 John Deere 6030
Max Geraets 302.1 Ford 8600
Jeff Rohrscheib 300.6 International 1466
Aaron O'Connell 299.5 John Deere 4440
Brian Benoit 298.2 International 1256
Matt Dorwin 297.1 John Deere 4450
Ben Peterson 293.1 International 1066
Connor Biesel 284.6 International 1066
Joel Heimbreht 254.6 International 1466

14000 Turbo

Matt Dorwin 381.1 John Deere 4450
Bill Spaeth 377.6 John Deere 6030
Aaron O'Connell 374.2 John Deere 4440
Joel Heimbreht 245.7 International 1466
Nick Huppert 244.7 John Deere 4450

6500 Light Open

Chad Zachow 342.9 International 666
Chad Webster 327.8 International 1066
Joe Gruber 283 John Deere 4455
Pete Lubich 265.9 McCormick

8500 Heavy Open

Scott Andres 344.9 International 1066
Jim Bunkelman 338.1 International 1066
Kevin Andres 333.9 Case IH 7240
Crystal Andres 331.6 MX 240
Ben Martyn 296.5 International 706
Mitch Miller 223.8 International 1066

9500 Heavy Open

Scott Andres 350.4 International 1066
Crystal Andres 347.1 MX 240
Kevin Andres 341.1 Case IH 7240
Jim Bunkelman 340.1 International 1066
Ben Martyn 319.3 International 706

11000 Improved Farm

Bruce Keschmiter 310.1 International 1066
Marty Shambour 307.9 International 1466
Joe Green 287.1 International 1066
Derek Jensen 286.1 International 1066
Rod Magone 282.5 International 1066
Al Becker 276.1 John Deere 4055
Wendell Edmunson 270.8 International 1486
Matt Hannula 241.1 Ford 8000

11500 Improved Farm

Bruce Keschmiter 316.5 International 1066
Marty Shambour 308.8 International 1466
Derek Jensen 302.5 International 1066
Al Becker 298.5 John Deere 4055
Joe Green 288.4 International 1066
Wendell Edmunson 287.9 International 1486

10500 Pro Farm

Jake Decker 343.2 International 1066
Dan Lange 334 John Deere 8110
Dan Tentis 333.4 International 1066
Mark Weber 330.1 John Deere 8110
Scott Knight 329.5 International 1026
Brad Lantto 319.5 International 1066
Danny Anderson 316.8 International 1066
Dave Palecek 316.4 John Deere 4020
George Weidendorf 289.1 International 1066

11000 Pro Farm

Jake Decker 336.5 International 1066
Dan Tentis 330.7 International 1066
Dan Lange 329.7 John Deere 8110
Brad Lantto 324.3 International 1066
Scott Knight 310.1 International 1206
Tanner Nettestand 293.7 International 1066

8500 Deisel Truck Street Stock

Isaac Raceler 270.1 Ford F250
Mike Foulk 257.1 Ford F250
Bradley Pettee 255.9 Ford F250
Bradley Priser 248.1 Ford F250
Brad McGuiggan 243.1 Dodge Ram 2500
Zach McConaushey 241.6 GMC 2500
Cole Barnes 232.1 Ford F350
Darrell Wold 232 Ford F350
James Dalton 224.7 Ford F250
Bo Delander 220 Chevy 2500
Billy Stout 217.7 Ford F350
Hunter Traynor 210 Ford F350

8000 Deisel Truck Hot Street

Chris Schultz 309.6 Chevy 2500
Jordan Esselman 296.3 GMC 2500
Dallas Zanker 294.5 Dodge Ram 2500
Bryan Dalton 260.5 Dodge Ram 2500
Kyle Kelnhofer 249 Chevy 2500
Alex Mahr 247.6 Chevy 2500
Matt Passofaro 247.4 Chevy 2500
Justin Kattre 240.4 GMC 2500
Warren Long 239 Ford F350
Shayne Birkland 238.2 Ford F350
Harry Ole 223.8 Chevy 2500
Luke Johnson 191.1 Chevy 2500


8000 Deisel Truck Open

Dave Carlson 351.1 Chevy 2500
Casey Clark 350.1 Chevy 2500
Chris Schultz 304.8 Chevy 2500
Brian Fayerweather 294.6 GMC 2500
AJ O'Shea 267.9 Dodge Ram 2500
Mark Steinmetz 189.5 Dodge Ram 2500
Corey Klein 109 Chevy 2500

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,565, Posts: 229,582, Members: 3,319.
This forum: Topics: 37,056, Posts: 225,843.

Our newest member BadHabit2