Oberg oil filter. April 21, 2017 12:53PM
What size Oberg filter do guys use on a IH 466. Also does anyone have a kit to make it bolt on with stock oil pump?

Thanks
Rusty
Reply Quote

Re: Oberg oil filter. April 21, 2017 01:20PM
I would recommend the tall System one it would have as much filter area or more than a 12 inch Oberg if it was took apart and roled out. Ive had a bunch of the others and wouldn't go back you can also get the 45 micron screen are you going to delete the oil cooler ore use it Remember none of them is as good at filtering as the paper filters you already have if they are working for you
Reply Quote

Re: Oberg oil filter. April 21, 2017 01:31PM
Oil cooler is already deleted. Stock filter housing is warped and leaks. So was looking for a upgrade as to getting another out of a junk yard. It's a 510 hot farm
Reply Quote

Re: Oberg oil filter. April 21, 2017 01:42PM
If the stock one was working good for you with no oiling issues the other wouldn't be an upgrade .But the plates not hard to make and I may have a stock one laying around you can have if I do
Reply Quote

Re: Oberg oil filter. April 21, 2017 01:36PM
I just got done plumbing mine. Cooler delete also, I used a Peterson Fluid Systems large remote mount filter head and used a big Wix filter on it. I forget the number filter but it is probably a 3 quart filter.
Reply Quote

Re: Oberg oil filter. April 22, 2017 05:07AM
What's the part# to use system one filter on a ih dt466
Reply Quote

Re: Oberg oil filter. April 22, 2017 06:48AM
We offer a universal filter head. Use Donaldson or Cat spin on filters. 4 -16 SAE Ports 2 in and 2 out plus 2 -4 SAE ports in the top for pressure sensors. We have the filter heads in stock. It also has mounting holes on the top and side. Donaldson offers both a paper, and synthetic media. The paper is a more traditional, and the synthetic is a fiber type. Works better if you get a lot of water in your oil. The filters flow up to 45 GPM.



Edited 1 time(s). Last edit at 04/22/2017 06:54AM by No Limit MFG.


Reply Quote

Re: Oberg oil filter. April 25, 2017 02:35AM
With that tall 12" system 1 filter what micron filter does everyone recommend for 25 50w synthetic oil for a diesel engine?
Reply Quote

Re: Oberg oil filter. April 25, 2017 05:59AM
We have used a 40 micron.



Edited 1 time(s). Last edit at 04/25/2017 06:02AM by No Limit MFG.
Reply Quote

Re: Oberg oil filter. April 28, 2017 12:52AM
I don't see a 40 micron in the 12" filters. There's a 35 or 75
Reply Quote

Re: Oberg oil filter. April 28, 2017 01:03AM
I would do the 35. 75 is pretty big. Its been a while, but you could call and ask how many GPM the filter will flow, and match it up to the pump. But I would try to stay at the 35 if you can.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,579, Posts: 229,610, Members: 3,320.
This forum: Topics: 37,058, Posts: 225,859.

Our newest member Fechtner Racing