|
Posts: 170 |
Pro Puller Tires has started production on an all new 24.5X32 tire, built right here in the U.S!
The first tires have just started to roll off the line, and we hope to have a tire at the Gordyville pull to showcase. The first three pictures were taken unmounted, and the last two were taken at 5 psi for accurate pulling pressure profile. Here are a few specs on the tires: Price: $7,900 per set Circumference: 208.75" - 209" at 10 psi (the first few tires were all within .25" of each other, the consistency in sizing is great!) Width: 25" shoulder to shoulder Tread depth: 3/8" from factory Bar angle: 21 degrees Rubber hardness: 80 points in the tread face, 65 points in the sidewall Weight: 410 lbs each uncut Recommended rim width: 26" or 27" Bar Count: 48 We kept the wider profile to keep our footprint advantage in tact. The tires will have a rim guard on them, to protect aluminum wheels from scratches and for a cleaner sidewall profile. The shoulders of the tires are more square than our previous model, so you can notch them if you prefer that style of cut. We will be doing the winnings program for the 2018 on these tires as well as our other style of tires. These tires will be available through all cutters listed on our website, or purchased direct from us. There will be track testing done on the tires before full production is up and running to ensure we've gotten it right. Tires should be available for delivery by end of January. For any questions or comments call me at 402-840-0244, or email me at aaron@propullertires.com Aaron Docter Pro Puller Tires |
|
Posts: 170 |
|
Posts: 170 |
|
Posts: 170 |
|
Posts: 170 |
|
Posts: 170 |
|
Posts: 170 |
|
Posts: 170 |
