06:14:04pm, Thursday, April 25, 2024
advice needed for 13mm p pump 7100
|
Registered: 12/09/2010 Posts: 12 |
Hello, I have been running a 13mm p3000 pump wanted to upgrade to 13mm p7100 pump going on a IH open rpm 3x3 hot farm. Wanted to see if hp numbers are about the same as like Harts, FVP, Columbus, Wimer. Any input would be great. Thanks Edited 3 time(s). Last edit at 01/15/2018 12:29PM by tractorpuller1466. |
Re: advice needed for 13mm p pump 7100
|
Registered: 07/09/2008 Posts: 103 |
There is no advantage from a 13mm p3000 compared to a p7100 as far as hp is concerned.
Yes the p7100 has better bearings and bigger cam but both pumps cams can be ground to suit the needs. Most all shops have their own profile they use on the cams. |
Re: advice needed for 13mm p pump 7100
|
Registered: 11/23/2011 Posts: 1 |
Depends on who builds the pump. |
Re: advice needed for 13mm p pump 7100
|
Registered: 12/09/2010 Posts: 12 |
Thanks for the input guys. Do you guys think that a harts 13mm 7100 p pump will out perform a FVP 13mm 7100 p pump. That's the two places Im leaning towards Edited 2 time(s). Last edit at 01/19/2018 05:18AM by tractorpuller1466. |
Re: advice needed for 13mm p pump 7100
|
Registered: 06/20/2017 Posts: 162 |
we've been looking at a 16mm p 7100 and from what we've learned hart is way to go for fuel may be different on smaller pump but thats my $.02 |
Re: advice needed for 13mm p pump 7100
|
Registered: 07/09/2008 Posts: 103 |
I can build you a 16mm p7100
$6500. 4026404114... |
Re: advice needed for 13mm p pump 7100
|
Registered: 06/20/2017 Posts: 162 |
who are you with? and the guy is looking for a 13 mm I'm not trying to take over his post |
Re: advice needed for 13mm p pump 7100
|
Registered: 08/14/2013 Posts: 260 |
Very pleased with my 14mm Wimer pump. |
Re: advice needed for 13mm p pump 7100
|
Registered: 01/16/2010 Posts: 149 |
I will take nothing away from Hart's or FVP, they are both very reputable companies in the business. However Columbus Motor Sports are serious players as well. They have many championship tractors out there pulling all over the country for many years. They are in Cloverdale at the NTPA event this weekend. I recommend stopping in and talking to those guys. If you cannot make it there. You can call them on Monday at their Columbus Ohio Location at Columbus Diesel Supply, ask for Dan. Good luck with your search for a pump. I wish you luck in your pulling adventures. rw |
Re: advice needed for 13mm p pump 7100
|
have a 13mm Harts that I would have for sale
6182673928 |
Re: advice needed for 13mm p pump 7100
|
4320 Guy
|
I would give Diesel Werx a try Phone # 605-690-4950. |
Re: advice needed for 13mm p pump 7100
|
Registered: 12/09/2010 Posts: 12 |
Thanks guys for your input!! |
Re: advice needed for 13mm p pump 7100
|
Registered: 04/06/2008 Posts: 263 |
If you looking for a 13mm go with fvp they don’t offer a 14mm so they have made a much larger investment in getting everything possible out of a 13mm |
Re: advice needed for 13mm p pump 7100
|
RED 2
|
Harts!!! no ifs ands or buts... customer service quality and performance is second to none... Brandon stands behind his stuff better then then u could even hope for.. |
Re: advice needed for 13mm p pump 7100
|
I've been trying to get in touch with Brandon Hart for 2 months. No luck. Hope everyone else has better luck! |
Re: advice needed for 13mm p pump 7100
|
BDD
|
Try scheid diesel believe they had a pump on shelf on display at Cloverdale this weekend. 3 locations so you can always get ahold of em |
Website Statistics
Global: Topics: 38,618, Posts: 229,674, Members: 3,325.
This forum: Topics: 37,064, Posts: 225,890.
Global: Topics: 38,618, Posts: 229,674, Members: 3,325.
This forum: Topics: 37,064, Posts: 225,890.
Our newest member JD_8520