IH rebuild kits February 09, 2019 11:30PM
Hi new at this sport,going to rebuild a motor.A 466 complete rebuild kit is about $1000-1300,
I have seen 498 and 505 and 510 kits also for a good bit more moneywith cast pistons I understand they might have better sleeves.I’m going to run a p-pump
I bought a 2.8x3 Hart’s charger 3000 rpm hyper cam and a used Harry’s head,going to run 3000 rpm most
May run a few open rpm pulls.9500lbs-11500 weight class My question is it worth spending the extra money on the extra cid,
And what should a expect out of the larger cid hp and torque wise. What bearing should I think about.Thank you.
Reply Quote

Re: IH rebuild kits February 11, 2019 02:59PM
If you have a standard crank you should get the Clevite coated H bearings. My suggestion is to call all of the engine builders and see which one has the best 510 kit. Will be a very noticeable difference from the 466.
Reply Quote

Newer Topic Older Topic

Author:

Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,574, Posts: 229,602, Members: 3,319.
This forum: Topics: 37,058, Posts: 225,856.

Our newest member BadHabit2