Advice for hot farm dt466 August 16, 2024 05:38AM
New to topic but not new to pulling and looking for advice. Obviously in todays world, prices aren't cheap but reaching out for advice and leads to be able to find and purchase a whole setup for fuel and air to run a hot farm class here in ohio. The build consist of a 560 rearend for weight savings and a dt466 for a power plant, running a triple disk clutch and flywheel setup from atlas as well. On the hunt for injection pump to replace a bosch MW pump, injectors, lines and a turbo. Looking for suggestions on a good basic recipe and good sources to purchase from. Thanks in advanced for the help, every bit of information helps.

Re: Advice for hot farm dt466 August 17, 2024 04:17PM
Harts or Wimer for turbo fuel and air. Either one can put in position for success. Best wishes!

Re: Advice for hot farm dt466 August 18, 2024 10:28AM
Quote
Old puller
Harts or Wimer for turbo fuel and air. Either one can put in position for success. Best wishes!
good luck getting a hold of either one to buy one!

Re: Advice for hot farm dt466 August 19, 2024 01:50PM
Scheid diesel on your pump, injectors and lines .

Salenbien (apex turbo) on your turbo

Both will get you what you need .

13mm ppump
5x25 dual feeds
.93 or .105 lines

Make sure you get some good injector hold downs .
They will get u started . Salenbien is good..just be patient. There busy . Scheid will call you back if they don't answer

Re: Advice for hot farm dt466 August 20, 2024 03:14AM
Thank you, 466 class appreciate your help, purchased a 13mm pump and now on the hunt for 5x25 injectors.

Re: Advice for hot farm dt466 August 20, 2024 10:27PM
Scheid diesel on your pump, injectors and lines .

Salenbien (apex turbo) on your turbo

Both will get you what you need .

13mm ppump
5x25 dual feeds
.93 or .105 lines

Make sure you get some good injector hold downs .
They will get u started . Salenbien is good..just be patient. There busy . Scheid will call you back if they don't answer

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 39,771, Posts: 234,057, Members: 3,575.
This forum: Topics: 37,668, Posts: 229,589.

Website Daily and Monthy Hits: http://pulloff.com/webalizer

Our newest member C3Pulling