rock valley pull June 04, 2010 11:57PM
anyone have results from rock valley friday night, wasn't able to make it
thanks

Re: rock valley pull June 05, 2010 12:30AM
Red Rock took first in SF and looked very tough .

Re: rock valley pull June 05, 2010 03:27AM
How did the 3000 rpm tractors do ? Were there any from outside of the neighborhood ? Just wondering ?

Re: rock valley pull June 05, 2010 07:22AM
Almost looked too tough...........

X-factor June 05, 2010 01:59PM
So is X-factor the new sled for the great plains pulls? Whats the story on it? New owner, new sled? The way it pulled last night made me never want to hook to it. Hopefully it was just a new operator and he'll get it setup better. Any other thaughts?

Re: X-factor June 06, 2010 12:45AM
Here is my thoughts on the x factor;
Good sled. Great people operating it. Did it pull hard? Yep. Could it have pulled easier. Yep. Will the guys running it change there setting. Don't know. But I would bet my tractor that everything was the same from tractor to tractor in that class. What else do you want but a fair pull. Read the sled, track, and anything else and pull. The sled will not beat u

Re: X-factor June 06, 2010 01:22AM
That sled has hooked a lot of superfarms before. New track for them. I bet it's a different story next time.

Re: rock valley pull June 05, 2010 02:02PM
9200 Super Farm 2nd hook

Dave Rozeboom Red Rock 332'6
Wide Loose Deere 320'94
Deerestroyer 319'38
Someday 314'11
Dustin Platte 310'62
Galeforce 308'3
Brady Andrews Predadeere 307'3
Extreme Pleasure 307
Foxy Farmall 305'12
Mike Bousema 304'96
Red Edge 299'18
Extreme Pleasure
Unloaded 291
Nick Schoeberl 288
John Wiekamp Shut it down

9200 Super Farm 1st hook

1. Kurt Kooima Red Rock 302'79
2. DeereStroyer didn't catch measurement
3. Wideloose Deere 297'05
4. Steve Bousema 296'58
5. Someday 295'97
6. Extreme Pleasure 295'25
7. Red Edge 292'33
8. Dustin Platte 288'37
9. Nick Schoeberl 285'34
10. Foxy Farmall 283'45
11. Wille Wiekamp 276
12. Extreme Pleasure
Unloaded 269'22
13. Predadeere 268'87
14. Gale Force 248'43


I will post more later or tomorrow. Remember these are very unoffical your welcome to correct them.

Re: rock valley pull June 05, 2010 03:15PM
If anybody got a pic of dustins second run. I would love a copy of it

Re: rock valley pull June 05, 2010 05:57PM
Looks to me like you better leave him in the seat !!!!!!!Beer
Let me know how Houston went .

Re: rock valley pull June 05, 2010 11:38PM
tugger that second pass was great and ppl back off the x factor it was there first night out give them a chance before u start bitching

Re: rock valley pull June 05, 2010 11:40PM
thanks you to everyone who showed up it was a great turn out both tractors and fans

Re: rock valley pull June 06, 2010 01:04AM
hey tugger did u get enuf to eat

Re: rock valley pull June 06, 2010 02:24AM
No tater salad. That little old lady must have told u to make more loins. So we ate them instead.

We blew 50 on food. Mmmm

Re: rock valley pull June 06, 2010 12:50AM
We got rained out. Got stuck. Bill F gave me a dose of the same crap u areSpinning and even got to tease Dale. Pretty good run over. And got to keep telling VB's that it wasent raining. Till they showed up

Re: rock valley pull June 06, 2010 02:11AM
Hey tugger we were with Van Beeks and were wondering about their info on it not raining in houston, now we know where that came from.

Re: rock valley pull June 06, 2010 02:28AM
It was not raining till u showed up. U could have left it at home. Nice runn u had a rock valley. I like ur good luck charm. She's cute. Lol

Re: rock valley pull June 07, 2010 02:04PM
tugger: PM sent



Edited 1 time(s). Last edit at 06/07/2010 02:05PM by TH.

Re: rock valley pull June 06, 2010 12:03AM
That superfarm class was sure fun to watch,

Re: What about the 3000 tractors June 06, 2010 02:17AM
To 3688 or whoever was there how did the 3000 tractors pull ? Were there any new rides out of NE IA MN or SD

Re: What about the 3000 tractors June 06, 2010 02:39AM
ty for the 50 tugger it will be well spent both times great run red rock congrads

Re: What about the 3000 tractors June 06, 2010 04:57AM
There was a few outside of great plains. Tim Dunklau and Mike Langon with a 4010 and 4020 which I think are Northeast Nebraska Tractors in the lighter classes and a Justin Johannsen with a 4440 but I didn't catch whether he was Northeast Nebraska or West Central Iowa. Then there was also a Theiss with an 806 pretty sure he is a Northeast Nebraska guy. There was also the Harms boys from West Central Iowa with that 1070 Case. As far as new tractors with Great Plains Lee and Brian Blankespoor added another Horse to the stable by building a light open farm 1066 called the Jewel.

Here is some more unofficial results

7500 Open Farm

Myron Blankespoor 706IH 274'50
Nathan Bottjen 1466IH 274'42
Tim Dunklau 4020JD 274'30
Dick Dubbelde 706IH 274'86
Terry Van Mannen 4020JD 271'55
Lee Blankespoor 1066IH 269'84
Mike Langon 4010JD 264'4
Marv Huisman 210AC 257'52
Mike Kats 560 Did not catch measurement


8500 Open Farm

Jason Sweeter 1066IH 298'98
Jeff Blankespoor 786IH 293'16
Nathan Bottjen 1466IH 290'48
Mitch Larsen 4255JD 290'15
Thiess 806IH 289'1
Junior De Yager 4040JD 288'74
Duane Burke 1066IH 288'36
Dick Dubbelede 706IH 288'3
Jared Dubbelde 4020JD 286'37
Myron Blankespoor 706IH 286'11
Tim Dunklau 4020JD 279'11
Justin Johannsen 4440JD 279
Greg Matthiesen 4430JD 278'1

Re: What about the 3000 tractors June 06, 2010 07:13AM
You happen to have any results from the 9500, 10500, or 11500 open farm. Kind of want to see what kind of hurt scrappy put on everyone. We missed it this year, but hope to be there next. Thanks

Re: What about the 3000 tractors June 06, 2010 11:44AM
We were only ablr to hook once in 10,500 and blew an injector sleeve but it ran well. 3688 puller will get the results of these three classes up soon im sure

Re: What about the 3000 tractors June 06, 2010 01:10PM
Great pull, great competition. both sleds showed how well everyone could drive their tractors. thank you to everyone who organized!

Nate Bottjen



Edited 1 time(s). Last edit at 06/06/2010 02:13PM by the unknown binder.

Re: What about the 3000 tractors June 06, 2010 02:50PM
Good job on the Mic. Mike...Thanks rock valley pullers assoc. for a good time

_ Lucky Seven_

Re: What about the 3000 tractors June 06, 2010 11:18PM
ty sdpuller

Re: What about the 3000 tractors June 08, 2010 01:10AM
Thank you Rock Valley group for a great show and chance to see if things would hold together. Good to see you 3688 and bro.

Re: What about the 3000 tractors June 10, 2010 03:19PM
Well ok maybe this isn't as soon as my brother said but here are the rest of the results from Friday nights benefit pull.

9500 Open Farm

Junior De Yager 4040JD 273'02
Jared Hagena 4255JD 271'32
Chris Albrecht 1066IH 270'39
Terry Short 966IH 270'33
Jared Dubbelde 4020JD 270'23
Jeff Blankespoor 786IH 269'77
Matt Van Beek 856IH 269'46
Gary Kavanaugh 986IH 267'9
Theiss 806IH 266'92
Duane Burke 1066IH 263
Dan Bryan 4430JD 262'95
Justin Johannson 4440JD 260
Alex Harm 1175Case 245
Tim Blankespoor 3688IH Scratch

10,500 Open Farm

Kevin Matthiesen 4055JD 332'08
John Norigon 4455JD 313'8
Lloyd Dekkers 966IH 298'11
Josh Van Beek 966IH 297'9
Dan Blankespoor 3688IH 290'08
Terry Short 966IH 287'11
Dave Rozeboom 1466IH 275'10
Craig Harm 1175Case 272'4
Matt Van Beek 856IH 259'10

11,500 Open Farm

Kevin Matthiesen 4055JD 304'88
Lloyd Dekkers 966IH 299'03
John Norrigon 4455JD 296'22
Robert Van Veldhuizen 1466IH 295'55
Kevin Van Beek 966IH 266'11

Yeah sorry it took so long to put this up been working some long hours at work and trying to get spraying done in between the weather yeah yeah poor me I know. Anyways I think it was a really solid start to the 2010 season, lots of iron, good weather, good track, and good food. I hope everyone had a good time for a good cause, and to fans and tractor pullers alike spread the word to your friends and hope to see you next year. Also on a side note I would like to invite everybody to the Thunder in the Valley Outlaw truck and tractor Pull in Rock Valley Friday and Saturday July 9 and 10 if you want to see a premiere outlaw tractor pull you do not want to miss this one. Well its getting late keep it between the chalk line, your chain tight, and leave the flag man in the dust see you all in Alvord next week for their first ever Great Plains Pull action gets under way at 3:00 come check it out good night everybody.

Re: What about the 3000 tractors June 11, 2010 02:04AM
Do you have the results of the 6700 open farm ?

Re: rock valley pull June 14, 2010 04:26PM
I just want to send a great big thanks to everyone who helped make the Charity Tractor Pull a success. With your help we raised over $13,000 for the American Cancer Society! Thanks to the people in the stands who came out to watch and eat. Thanks to the tractor pullers who came from near and far to show off or try out there tractors. Thanks to all the helpers on the track. Thanks to the Rock Valley Tractor Pull Committee for the use of there awesome facility. Thanks to Marv Manifold for bringing his little skid and tractors for the kiddie pull. Thanks to Gary Sabotka and the Red Rock Skid, Thanks to Kim Van Ginkel and the X Factor Skid. We couldn't pull this type of pull off without the help of alot of people and for this I am truly thankful that so many people are willing to help such a worthy cause. Thanks again.

Re: rock valley pull June 15, 2010 02:13AM
hey curt is extream pleaser in ravanna or ottertail this weekend????

Re: rock valley pull June 15, 2010 02:40AM
we will be in Ravanna with Extreme Pleasure unless it rains more, Extreme Pleasure "unloaded" will be in Alvord for a great plains pull

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,614, Posts: 229,670, Members: 3,325.
This forum: Topics: 37,064, Posts: 225,890.

Our newest member JD_8520