For Sale

Next Newer Ad Next Older Ad
For Sale: F/S Shop Clean Out 6 cylinder IH Alcohol Cylinder heads, Turbos, Holset turbo parts, Clutch Can, Turbo Parts, Oil pan, Keizer rim pieces, etc etc etc August 24, 2026 03:37AM
Cleaning out the shop!! Don't be afraid to shoot me an offer on anything!

-IH Bamber aluminum alcohol head, head is fresh from cylinder head shop, setup for 4-3/4" bore, comes with all valve train, head studs, valve cover, etc (everything except intake & exhaust manifold), could supply information on fuel system, rod & piston information, and camshaft as well $18,000

-IH aluminum alcohol head built by Roger Lechtenberg & Don Storjohan out of Iowa. Includes intake and exhaust manifold. Head was just serviced 2 runs ago by Harry’s Heads out of Sioux City (valve job, springs checked, etc). Was used on 4.75” & 4.875” bore. Can help with fuel system settings, etc. Also can supply rod & piston information as well. $8,000

-Browell aluminum bellhousing, 8-5/8" depth, setup for cross shaft & rear candle stick/bearing holder (not included), good certification until February 2028. $1500

-13" Keizer rim halves, were polished but were on the inside of current rims so need a good clean up $800

-Keizer Franklin planetary rim centers, black outlined $300

-IH oil pan set up for external oil pump three –16 fittings welded into it for pick ups and an internal screen that is removable. $200

-Peterson oil tank, 5 gallon capacity, two -12 return fittings, two -16 feed fittings, breather fitting $200

- 2 - Holset HC5A turbos with Keating Machine billet 4.4" intake wheels, 11 blade G-trim (4.4) exhaust wheels, journal bearing, 3.5" hose outlets on intake housings, no exhaust housings included. These were top turbos on a three charger alcohol setup, only reason for selling is they won't fit our new turbo setup. $2000 each or $3500 for the pair

-Small water injection tank, it uses boost pressure to pressurize the tank, perfect for a small 8-12 oz of water in a run on a alcohol tractor. $100

-K&N X-Stream Top Filter Red 11in / 5.125in Neck Flange / 4.37in Height Part # 66-3120 2 available $175 each or $325 for the pair

- 1-Holset HC5A 4.1” intake cover for stock Holset 3523546 wheel (small back) $150

- 1-Holset HC5A 4.1” intake cover for stock Holset 3593927 (large back) $150

- 1-Holset 3523546 4.1” inducer x 5.15” exducer intake wheel $100

- 1-Holset HC5A backing plates $100

- 1-Holset 11 blade G-trim exhaust wheel machined for ball bearing setup $400

Call or text, if I don't answer leave me a message 605-660-two9two1


[www.ulmerracing.com]



Edited 2 time(s). Last edit at 09/10/2026 09:53AM by Allen Ulmer.

Website Statistics
Global: Topics: 41,336, Posts: 243,003, Members: 3,746.
This forum: Topics: 1,533, Posts: 1,533.

Website Daily and Monthy Hits: http://pulloff.com/webalizer

Our newest member All in time