Page 1 of 4
Pages: 1234
Results 1 - 30 of 107
The 3x4 map groove charger was voted out for the 2024 season in LLSS. I’ve been told the map groove charger for hot farm is probably going away for 2025. Smooth bore is apparently easier to tech according to officials.
by
Oliver12v
-
Forum
Pump Doctor 13mm open rpm p7100. Capable of 1050+cc. Self contained, 19 runs since new. No hub included. Can ship on buyers dime, or deliver to Shipshewana. $4,000 Call or text. 260-668-1913
by
Oliver12v
-
For Sale
24.5 Firestone Pullers on polished Whip Station wheels. 15” offset .390 bar with some cords showing. Nice light weight setup. Can help arrange shipping or deliver to Shipshewana. Pics available. $4,000 260-668-1913
by
Oliver12v
-
For Sale
1850 R&P ratio is 6.375, all Oliver non plant bull pinions are 4.46.
by
Oliver12v
-
Forum
Ring and pinion and bull gears would all be the same in 1850s. Only option would be the possible high speed 4/6th gear set for the transmission.
by
Oliver12v
-
Forum
You mean the event that was supposed to happen this weekend that we never heard about again after the flyer came out.
by
Oliver12v
-
Forum
I've looked into this quite a bit. I see wheel tethers similar to what the monster trucks run in our future. It's basically a brake rotor style disc mounted to the hub that rotates between a stationary bolt on set of fabricated brackets. Honestly the added weight is the only down side. But I feel it's manageable.
by
Oliver12v
-
Forum
From all the pullers. Thanks for putting together a terrific track that held together all night long, and the level of appreciation towards the competitors and crew did not go unnoticed. We had a fantastic night of pulling Saturday, and hope that the LLSS class gets the option of both nights in 2023.
by
Oliver12v
-
Forum
From the very bottom of my LLSS heart. I'm begging you guys to stop with this. It's embarrassing, and continues to give our class a black eye. Pick where you want to pull, follow the rules and enjoy your hobby. My schedule for the summer had 67 potential hooks on it within 325 miles of the house. Finding an enjoyable place to complete is easy. No one is forcing you to do anything. But t
by
Oliver12v
-
Forum
There were 5-6 different Oliver LLSS combinations at the Bunkerhill Shootout 2 weeks ago.
by
Oliver12v
-
Forum
I had the same problem with my Haslag hitch on my Oliver. I ended up using a piece of .030 aluminum sheet metal with the right stuff to seal up the rear end. Then just bolted the hitch over the sheet metal. I've been leak free for 3 seasons now.
by
Oliver12v
-
Forum
Does anyone have access to SFI 47.2 spec?
by
Oliver12v
-
Forum
We will have a brand new tractor out this year out of northern Indiana.
by
Oliver12v
-
Forum
The use 8 d rings bolted through the floor on top of the crossmembers of the trailer with a plate on the bottom side. I use carriage bolts and lock nuts to bolt them down front and back of every tire. Then I use 2” ratchet straps with j hooks over the top of all 4 tires. The most secure way I’ve found to haul a tractor.
by
Oliver12v
-
Forum
As what most would consider a young man in our sport. I’m going to agree with that less and less fans in the stands care about power plant and sheet metal matching. We are facing two issues with the sport. One is cost, there are 10,000 different opinions on how to keep it down. None of them work. But to me, the most important issue is fans being able to associate what we are doing to their life e
by
Oliver12v
-
Forum
1. $1,000
2. $109
3. $108
4. $107
5. $106
6. $105
7. $103
8. $102
9. $101
10. $100
by
Oliver12v
-
Forum
IPL has a Massey that runs with them as a hot farm. But it is a decubed 540 V8 Perkins.
by
Oliver12v
-
Forum
Yes, 8200 should be an achievable goal without a lot of work.
by
Oliver12v
-
Forum
I ordered a set this spring. Was told six weeks and they showed up 12 weeks later incorrect. They acknowledged the mistake and told me 4-6 more weeks for replacements. Then a week later told me I was moved to the front of the line for replacements. I’m now 19 weeks in, and when I call it goes to voicemail and I never get a call back.
by
Oliver12v
-
Forum
When is the last time someone has actually had the phone answered at PowerBore?
by
Oliver12v
-
Forum
No, you can get a herc in a wheat land tub. But it's not exactly in factory location. Herc tub would be your best option.
by
Oliver12v
-
Forum
It's doable, my 1800 rear end on a C channel frame is 5666 lbs with me in the seat.
by
Oliver12v
-
Forum
You won't get a 6.7 to 466 without a deck plate. Those don't meet MOST tractor rules.
by
Oliver12v
-
Forum
Remove the long shaft, pto, and all the hydraulics. Then use a 12v hydraulic pump off a snow plow plumbed to the factory steering motor in the dash. It will steer as good as factory.
by
Oliver12v
-
Forum
Does it have damaged panels, or are you unhappy with the color?
by
Oliver12v
-
Forum
Where do you locate the compressor housing flange for a hx60? Measurements are 3.90, 3.04 and 2.80. Looking for something steel, setup for 4” pipe.
by
Oliver12v
-
Forum
Under 4000 rpm 8.3, above that deck plate 6.7
by
Oliver12v
-
Forum
I currently own a set of Puller 2000s that are 331 a tire. So mounting them on keizers versus the whip stations I currently have is my best option for weight savings?
by
Oliver12v
-
Forum
What is the lightest combination for a 24.5 on aluminum? I know Keizers are advertised as the lightest wheel on the market. And Pro Puller has their 24.5 Ultralights advertised at #365. What is the best option available for a new LLSS build?
by
Oliver12v
-
Forum
Page 1 of 4
Pages: 1234