Page 1 of 1 Pages: 1
Results 1 - 25 of 25
As of right now the Legends Series will be pulling on Friday and will have vehicles displayed the rest of the weekend at the Tractor Pullers Reunion tent. The committee for The Half Century of Progress has been in discussions with a few of the former teams. We are hopeful that we will have vehicles as the Cajun Queen, the Super Banana, and many more of the old competition vehicles in the display.
by
Lite Puller
-
Forum
I will post classes and schedule for the pulls as the time gets closer. We are working through several things with a show of this size and scope, then throw the corona curve ball in the mix...
As for now we planned on things being similar to 2019 show with scheduling and classes but a few minor changes. It is a huge challenge to do as much as we can to try to accommodate as many as we do. We p
by
Lite Puller
-
Forum
We are doing well Clark, harvest is underway. Plan is to start going back together when fall tillage is complete
MMZTU, well the engine started life as an early Detroit series 40. Which is the same as the Navistar truck block. I just didn't think 4 mains in the ole 504 MM would last too long on diesel, and then there was the issue of making weight! So yes, that is why we call it the Fran
by
Lite Puller
-
Forum
As far as the tractor goes we had a few big issues that let us only run twice. Iong story short I have multiple torched pistons,several junk liners, and a junk crankshaft in the shop. You can see some of the challenges we faced at the Team Frankenstock facebook page.
We are looking forward to having a state level class to pull at indoors.
Andy Buhr
by
Lite Puller
-
Forum
looking forward to visiting with everyone again
this board was up last year, had a lot of great pictures and stories
by
Lite Puller
-
Forum
All are invited to the 2014 pullers reunion.
July 10 -13 at the I & I Historical Farm Days
any make model or pulling vehicle welcome for display
Come visit with the legends of the sport
The “Drivers Meeting” starts after the parade at 1:00pm
See the attached Flyer
Thanks Morgans for the space to advertise this event!
by
Lite Puller
-
Forum
Looking for a Peterson intake manifold on a MM 4 banger. i have tried calling number from old HOOK magazine and had no luck. Are these still being made and if so who and where can i get information on it?
Thanks for any help
Andy Buhr
by
Lite Puller
-
Forum
Try G & G Machine in Rantoul 217-892-9696, Pete should be able to help you out
by
Lite Puller
-
Forum
We will see you on Sunday afternoon Carl
by
Lite Puller
-
Forum
Hope to make it... have fingers crossed.
Andy
by
Lite Puller
-
Forum
can anyone tell me what hydraulic oil filter number is used on an IH 400 series truck filter basewhen running an external oil system?i am looking for a fleetguard number.
also what do you need to do with the regulator and filter bypass, i have the big oil pump like Hyper and D and R use.
Thanks
by
Lite Puller
-
Forum
Rest in Peace Dave, another “Legend” of tractor pulling is gone.
With Sympathy,
Andy Buhr
by
Lite Puller
-
Forum
The easiest is to get a set of "top hats" and new calipers, got mine from Bob @ Full Pull Motorsports. they work great!! the stock brakes do not work well with Willwood master cylinders. fought it for a while and then went with the disc set-up, didnt look back. if you have any other question i may be able to help. my contact info is on look under the rules page, phone number is on officer list.
by
Lite Puller
-
Forum
Right now the IPA has 2 - 466 cid tractors, (IH) each have new engines and tranny combinations in the tractors. from the few runs they have it seems to look very promising, as they seem very competative with the 640's.
Andy Buhr
by
Lite Puller
-
Forum
Go to :
www.illianapullers.com
Rules are posted on the website
Andy Buhr
by
Lite Puller
-
Forum
It is a Light Super Stock, Ag diesel Tractor. I am running a de-stroked V-8 with 3 turbo's. It has been a very fun and challenging experience building this tractor. We are starting to get some bugs worked out and hopefully go have some fun with it. I wanted something different to put in the LSS class and started building the MF’er a few year sago and got it complete late last year. I pull wi
by
Lite Puller
-
Forum
Hey Carl,
Where are you having the meeting, are we going to be by the annoucers platform?
Thanks
by
Lite Puller
-
Forum
Did you get the big MM back together yet? hope to see it at Rankin, should be another good pull there.
by
Lite Puller
-
Forum
The 1100 chassis can get down light, with the Perkins 6 you should be able the easily get it under 5500lbs. What weight class are you wanting to get to?
by
Lite Puller
-
Forum
as i recall the early 9455 and 9655 AGCO tractors had the IH stamped on the engine and casting numbers are IH, even if the the tag said Detroit Series 40. If the rules allow the update, i would run the IH or Hyper head.
by
Lite Puller
-
Forum
Send me a PM or e maili have some experiance with the MF tractors in super stock trim. also have a lot of parts.
Andy Buhr
andy@giffordbank.com
by
Lite Puller
-
Forum
Invitation to all
The World Largest Tractor , Big Bud 16V-747, will be on display at the Half Century of Progress, Rantoul IL.
Don’t Miss your opportunity to see this tractor going down the Track! The Big Bud is going down the track on Friday and Saturday night. This Tractor has over 1000 Horse Power V-16 Detroit and Weighs over 100,000 lbs! It might take two sleds to stop it!
Frid
by
Lite Puller
-
Forum
as far as i know he is still working at TFS in southern IN, 812-358-5327.
Hope this Helps
by
Lite Puller
-
Forum
This a a picture from old Puller Magazines, sorry for the poor quality
I am i big MM fan and would like to see more information on the old G 1000
Sorry all other pictures i have are larger files than 500KB
by
Lite Puller
-
Forum
If they can keep all of the doors shut it should be acceptable. Organization, getting things in and out in a timely manner, will be key this year.
by
Lite Puller
-
Forum