01:33:42pm, Monday, May 06, 2024
|
case tractor just gettin started
|
Anonymous User
|
hey all, just started running our 1370 case in the hot farm class stock tires,no water, 3x3 turbo, p/s t/a allowed 10500 -14500 lb classes. just got the lm466 turbo on and need some help, how much timing should we be running? it has pencil injectors, can i get bigger ones? how do you make the power shift live lomger? someone said i need to mess with the tourqe limiter clutch?? any help would be greatly appreciated, thanks in advance |
|
Re: case tractor just gettin started
|
Posts: 54 |
Well I had a 1370 that was in the farm stock class that had stock engine/pump/lines/injectors. And I also put new torque limiter disks in and they would still not hold up to just the fuel screw being turned up. I believe most people put a 8 speed tranny in to pull. 1370 Black Knight Pull [www.youtube.com] My name = Kyle Kerr |
|
Re: case tractor just gettin started
|
Call Kurt Kastner -712-269-0150, He has a real good running 1570!!! |
|
Re: case tractor just gettin started
|
Registered: 08/09/2010 Posts: 13 |
How many cubes, stock cam? Compression? |
|
Re: case tractor just gettin started
|
Anonymous User
|
stock 504 with a stock cam right now, lookin to put one in this winter, don't know what would be a good grind yet?? and thanks farmboy i'll call him, is he still runnin the powershift?? |
|
Re: case tractor just gettin started
|
He's still running the powershift. The torque limiter is basically bolted solid. And he's changed the relief pressure. He's been running it in 4-2 this year. |
|
Re: case tractor just gettin started
|
Registered: 08/09/2010 Posts: 13 |
I ran an 1175 for 3 years but I removed the power shift. Had a 3 disk Crower. Also ran 5 hole .025 bosch injectors with a p series pump set around 650cc. I was 504ci with a bone stock cam and a 3LM. Timing was 36 degrees. Made 72 psi intake boost at 5000rpm's and it ran like a raped ape. |
|
Re: case tractor just gettin started
|
I've never seen an 1175 or 1170 with any transmission other than an 8 speed. Bone stock cam, 650cc, 3lm, 5000 rpm?? |
|
Re: case tractor just gettin started
|
Posts: 54 |
thats what i was thinking [www.youtube.com] My name = Kyle Kerr |
|
Re: case tractor just gettin started
|
make sure you needle bearing the rear end |
|
Re: case tractor just gettin started
|
case fan
|
what part of the world do you plan to pull |
|
Re: case tractor just gettin started
|
If you can run a 3x3 turbo why are you using a 3LM 466 ??? |
|
Re: case tractor just gettin started
|
Anonymous User
|
3lm 466 was cheap and fits right on for now, i know there's better stuff but budget for now, still just learnin with this tractor then we gonna build a better one down the road. pullin in nw iowa and sw minnesota. and i've heard you guys talk about needle bearings in the rear, which bearings?? |
|
Re: case tractor just gettin started
|
SPIDER MAN
|
The cross pins, back gears and spider gears in your differential. |
|
Re: case tractor just gettin started
|
What is the reasoning for needling the rear end? Is this for all or just power shift models?
Pulling 8-12 mph at 12500 and 14000 at somewhat more than stock hp |
|
Re: case tractor just gettin started
|
1175puller
|
Needling the Differential cross shafts & the side gear shafts reduces friction & helps the tractor go straight & spin with both tires instead of "one wheeling". reduced friction means more HP on the ground. however i think its hardly necessary for the tractors being talked about in this post, there are much better places to spend the money you have to work with. unless of course you have your own machines to do the work with. |
Website Statistics
Global: Topics: 38,707, Posts: 229,810, Members: 3,330.
This forum: Topics: 37,082, Posts: 225,955.
Global: Topics: 38,707, Posts: 229,810, Members: 3,330.
This forum: Topics: 37,082, Posts: 225,955.
Our newest member LT Limited Pro
