504 hp February 07, 2014 01:22AM
Just curious if anybody has engine dynoed one that was set up for a 3000rpm class. sorry was talking about a case 504 thanks. Just wondering a ballpark number to be expected.
Reply Quote

Re: 504 hp February 07, 2014 01:07PM
Yes I would like ball park figure as well I have 10mm pump 3lm charger lazered injectors pump set up for 3000rpm
Reply Quote

Re: 504 hp February 07, 2014 02:19PM
My pto crashed at 365hp. We got more power since good guess 400 plus.
Reply Quote

Re: 504 hp February 08, 2014 10:57AM
Ed thanks yea my dyno only goes to 250 and it didn't even start to pull it down at that so that's why I figured id ask others what there seeing Im new to the cases and built this one to try compete with the deere and IH in my area farm stock
Reply Quote

Re: 504 hp February 08, 2014 04:26AM
Wow Ed I hope you find out whats wrong with your tractor. I have a 7120 that I use all the time and had to have a exhaust manifold gasket replaced it was dynoed when it was done 2300 rpm dynoed at 330hp. all stock on the inside stock pump but it was rebuilt and turned up several years agoe.
Reply Quote

Re: 504 hp February 08, 2014 05:29AM
ha ha
Reply Quote

Re: 504 hp February 08, 2014 02:58PM
To be competitive in the 3000 RPM class here you have to be north of 1000 HP.
Reply Quote

Re: 504 hp February 08, 2014 03:32PM
Ok but id like to see a stock 7120 with 330 hp
Reply Quote

Re: 504 hp February 09, 2014 02:33AM
Here in Mo. they pull an 18000 out of field class with several Magnums in it. They are all 350 plus. I personally know an engineer from Case-IH who told me that the Magnums are capable of 400 HP with all factory equipment installed if you know what you're doing.
Reply Quote

Re: 504 hp February 09, 2014 05:14AM
After thinking about it more, I guess it could be possible if the pump is turned up all the way. We have had several magnums and they are a great tractor
Reply Quote

Re: 504 hp February 09, 2014 01:41AM
Same here. Not to worried about the hp. as long as you have the torque!



Edited 2 time(s). Last edit at 02/09/2014 01:43AM by amnima.
Reply Quote

Re: 504 hp February 09, 2014 03:18PM
Why would you have a 7120 with a 504? I suspect your 7120 might have a cummins so why only 330 hp? LoL
Reply Quote

Re: 504 hp February 10, 2014 05:55AM
I have three magnums 2 7120s and a 7250 the one 7120 is ok bun nothing special. the 7250 was on the dyno and was right at 280 the other 7120 was dynoed and I have never done anything to it but I bought it used and when it was dynoed it was at 330. Other than smoke more than the other 2 and having much more torque seems to run great
Reply Quote

Re: 504 hp February 08, 2014 10:53PM
I have a 1570 with a stock 504 that I pull. it has all stock equipment. All I did was take the pump in and turned to full fuel and reset the governor curve. its right at 400 hp and I competed very well. The biggest thing is to make sure that you can keep full fuel to it at all times. If you have a 504 from anything but a 1570 you will probly need to change injectors and lines. The 15s came with the big injectors and 93 lines factory
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,721, Posts: 229,844, Members: 3,330.
This forum: Topics: 37,083, Posts: 225,971.

Our newest member LT Limited Pro