DT360 with 414 4.3" bore sleeves? August 06, 2016 02:12AM
Can the 414 4.3" sleeves be installed in the dt360 block? What piston rod combo would be used?


Also do the 360 and 466 use the same valve guide?
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 07, 2016 10:39PM
The only oversized pistons I've heard of in the smaller block is by using the D-360 ag block with 361 pistons to get 407 cubes. I've got one for sale that put water in the oil for cheaper than you can buy the kit if you're interested. In SW WI
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 07, 2016 11:16PM
I sent you a message
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 08, 2016 12:37AM
Darton makes a 4.25 sleeve that drops right in. Use a 4.25 deere piston.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 10, 2016 01:59AM
Neil beat me to it. Very knowledgeable guy. Spent time with me on the phone and was a huge help. Didn't know me from Adam, but took the time to talk to me. I have the Darton part number written down if you need it.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 22, 2016 05:33AM
What is the biggest sleeve you can fit in a dt360 truck block?
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 10, 2016 04:58AM
Could you post that part number please.
Thanks!
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 10, 2016 07:13AM
That Darton part number is 1-FH4250
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 11, 2016 05:02AM
With a 4.25 bore and (I assume) DT 360 stroke, what cubes does it make?
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 11, 2016 05:08AM
404, same dimensions as a small block deere.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 11, 2016 08:19AM
Emailed Dartan they want $136/sleeve.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 12, 2016 04:21AM
You could have the block fixed to use a bigger sleeve
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 25, 2016 03:26PM
I believe that is just a darton blank. Outside will need to be machined to fit your application.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 12, 2016 07:13AM
I have a dt360 with a 4.4 bore in it.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 13, 2016 07:56AM
Cody message me please with details. I tried to message you and it says your inbox is full
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? October 21, 2016 05:43AM
Hi Cody, Paul here. I am also intrigued by your statement.
Could you please forward the info to me as well?
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? October 21, 2016 11:21AM
What would you like to know? Just bore the block & press sleeves in.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? October 22, 2016 03:24AM
Thanks.

Anything special besides that? What sleeves, pistons, block and crank do you have if you don't mind me asking? Mostly the last three.



Edited 1 time(s). Last edit at 10/22/2016 03:27AM by KM0PT.
Reply Quote

Re: DT360 with 414 4.3" bore sleeves? August 22, 2016 05:43AM
What is the largest sleeve you can fit in a dt360 block
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,706, Posts: 229,808, Members: 3,330.
This forum: Topics: 37,082, Posts: 225,954.

Our newest member LT Limited Pro