|
Midwest Pulling Sled Rules:
SPEED BOARD: Can bump as many times as long as you get back under in the 5 second time limit. ANTIQUES: 3 MPH speed-3000 RPM 1. Tractors must be pre 1960. Production must have started before 1960. 2. Drawbar must be stock in design, rigid in all directions, the max height no more than 18” from the ground and minimum 24” from the center of the axle to the hitch point. Clevis/hole in the drawbar must be no smaller that 3” in diameter. 3. Tractors must remain stock in appearance .Including but not limited to tin, seat and brackets, radiator, steering components, front ends and rear axles. 4. Tractors must have a working PTO 5. Gasoline, lp, & diesel fuel only. No alcohol or nitrous. 6. No cut tires, backwards tires or radial tires allowed. 7. Max tire size 15.5x38 or 16.9x28. IMPROVED ANTIQUE: 4 MPH speed-3000 RPM 1. Tractor must be pre 1960. Production must have started before 1960. 2. Maximum drawbar height will be 18" from ground, minimum 18” from the center of the axle to the hitch point and rigid in all directions. Clevis/hole in the drawbar must be no smaller that 3” in diameter. 3. Backwards tires allowed. 4. No front cut tires or radial tires 5. Max tire size 15.5x38 or 16.9x28. 6. No turbo charged tractors. 7. PTO not required. SUPER ANTIQUE: 6 MPH speed-3000 RPM 1. Tractors must be pre 1960. Production must have started before 1960. 2. Turbochargers are allowed. 3. Maximum drawbar height will be 20” from the ground and minimum of 18” from the center of the axle to the hitch point. Clevis/hole in the drawbar must be no smaller that 3” in diameter. 4. PTO not required. 5. Cut tires allowed. 6. Radial tires allowed. 7. Backwards tires allowed. 8. Must have wheelie bars. 9. Must have a working kill switch. 10. Dead-man throttle recommended. 11. Max tire size 18.4x38. |
