08:42:12am, Sunday, May 19, 2024
what engine in IH 460 or 560
|
what different IH engines will fit in the 460 or 560 without modification? what will bolt right in? |
Re: what engine in IH 460 or 560
|
Anonymous User
|
221,236,263,282,291,301,300 series with the back plate from a 666 or 686 |
Re: what engine in IH 460 or 560
|
what are 300 series engines? sorry, i'm new to this |
Re: what engine in IH 460 or 560
|
Registered: 08/21/2008 Posts: 590 |
D312 or D360. 312's were found in 666's, early 686's, and Hydro 70's. D360's were found in 766 & early 886 tractors, and some 453 IH hillside combines, as well in some IH tree skidders, sometimes w/ a turbo. 360's were also found in some IH trucks in various turbocharged & turbocharged/aftercooled versions. |
Re: what engine in IH 460 or 560
|
Anonymous User
|
300 series (312-360) are the little brothers to 400 series.just a small block version with cubes in the 300 numbers.400 series are in the 400 numbers,(414,436,466).the prefix tells what the engine is.D is for diesel,T is for turbo,A is after cooled.example,D360,DT360,DTA360. |
Re: what engine in IH 460 or 560
|
so let me get this strait, a DT360 out of a truck, with a 666 or 686 backplate will bolt right in, no modifications, what about clutch? thanks for all the help! |
Re: what engine in IH 460 or 560
|
Anonymous User
|
You will need a different flywheel/clutch assembly if you want to use the truck engine. |
Re: what engine in IH 460 or 560
|
Registered: 08/21/2008 Posts: 590 |
You might need the front cover off the D312 to put a truck D360 in a 666 or 686 as well. |
Re: what engine in IH 460 or 560
|
Anonymous User
|
I think you can use IH 806 motor in it. |
Re: what engine in IH 460 or 560
|
Keep in mind that the 460 and 560 have different bell housing size. the 560 is alot bigger and the same as an M farmall |
Re: what engine in IH 460 or 560
|
Registered: 10/21/2008 Posts: 756 |
If you have the back and front plates off of a 666-686 312 engine you can also BOLT IN a 400 series engine, the 414-436-466 series engines. This combination is just a bit longer (3") than the 300 series and a bit heavier. If weight is a big issue this might not work. The one drawback to the 300 series is that the availability of a stock upright turbo manifold is nill. You will have to go to a hedder or fabed cast manifold. I am in the process of building a cast turbo manifold for a fellow in the midwest. Edited 1 time(s). Last edit at 01/26/2010 09:56AM by gonzo 1066. |
Re: what engine in IH 460 or 560
|
Hello
Just wondering if the DT 436 engine with the turbo on the top of motor. Will fit into my international 560 tractor. If So what all will i need in parts to do the job. Thanks Gary |
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Our newest member Jacklovik2009