10:49:35pm, Friday, May 03, 2024
400 farmall more power
|
Registered: 02/26/2019 Posts: 49 |
Has electronic ignition hotter plugs high compression pistons turns out 55 to 57 on the dyno will more fuel help it or what else can I do before spending a lot of $$$ |
Re: 400 farmall more power
|
Registered: 04/04/2008 Posts: 1,522 |
Reground cam |
Re: 400 farmall more power
|
billee,
|
Little to improve much to be where you want to be, 15 hp doesn't do much except frustrate you. Bore and stroke, - then go bigger than planned first time, it takes 100 plus hp to be competitive in 4500 # 3 - 4 mph classes small tire classes.If you think the stock tractor winning is stock, go home stay there. |
Re: 400 farmall more power
|
Registered: 02/26/2019 Posts: 49 |
I know the top tractors aren't stock I even have a pretty good idea on what their turning. I place last year a few times with the setup I have. Just wanting a little more to were I dont have to pull the t/a like I have to sometimes in the 6500lb class. I have two others i pull in the bigger classes so no extra money for the 400 this year. Next year I'll stroke it. I heard a w-9 carb would add 10hp so just curious if there is any other tricks |
Re: 400 farmall more power
|
billee,
|
it takes fuel, timing, carb setting, air intake system and air pressure, tires, weight distribution also |
Re: 400 farmall more power
|
Registered: 02/26/2019 Posts: 49 |
I know weight and tire pressure does it need more than stock carburetor? |
Re: 400 farmall more power
|
What I See
|
It might take 100 plus horsepower in the 4500 lb 3-4 mph class at a national level pull but it sure doesn't take that much at lots of local level pulls..My 110 hp MM U has never embarrassed me at the local pulls in 5500 thru 6500 at 4 mph..I'm a spectator at national level pulls... |
Re: 400 farmall more power
|
Registered: 02/26/2019 Posts: 49 |
I was guess our top competitor to be about 130hp at our local pull. Not looking to place every time just be a little tougher. I honestly think the tires are to much for it right now they bite hard. Never spins until you have to pull the t/a |
Re: 400 farmall more power
|
Horsepower is a product of RPM and Torque. Focus on increasing (or maximizing) one or both of those factors to get you what you want. |
Re: 400 farmall more power
|
Registered: 02/26/2019 Posts: 49 |
Well I've already put a different govenor spring in it also |
Re: 400 farmall more power
|
LEWIS
|
YOU can open up the ventura in the carb you you have thin the throttle shaft and shave the head and while your at it clean up under the valves a little and get a grind put on the cam as Patches said all of that shouldnt cost over 350 dollars |
Website Statistics
Global: Topics: 38,687, Posts: 229,790, Members: 3,328.
This forum: Topics: 37,080, Posts: 225,953.
Global: Topics: 38,687, Posts: 229,790, Members: 3,328.
This forum: Topics: 37,080, Posts: 225,953.
Our newest member Jason