04:14:01am, Friday, May 17, 2024
8-10 mph gearing
|
Building a transmission with direct one under and two under. I want to put a mph gear in also. Most places that run pace run 8-10 mph. Tractor will have a torque. Engine is 3000 rpm 466 with a 3lm. What king of gear is about right for that. Will also have stock tooth count CM.
Thank for the help and page!! |
Re: 8-10 mph gearing
|
Puller 7
|
Stock 2nd on high side is a good 8mph gear but unless you have better than stock pump and injection then you won't be able to hang in that gear. |
Re: 8-10 mph gearing
|
It does |
Re: 8-10 mph gearing
|
What I Know
|
You need a gear thats at least 25% faster than the class speed limit... |
Re: 8-10 mph gearing
|
Guest
|
What do you like for a 12 mph IH 66 series type of tractor, high 3rd to much? Is a custom gear needed? 3000 rpm |
Re: 8-10 mph gearing
|
Registered: 06/28/2016 Posts: 20 |
3rd is definitely too fast. Most 66 guys are running a custom 2.4 or 2.5 gear for 12 mph. Karl at Atlas can hook you up with a gear set. Follow us on Facebook @ Mean Streak Pulling Team [m.facebook.com] Edited 1 time(s). Last edit at 03/04/2022 04:23AM by mo966. |
Re: 8-10 mph gearing
|
What I Know
|
In late May I'll probably have an Atlas 40-33 IH gear for sale that goes in the third gear slot..It has about 25 passes on it in a 12.5 mph class..It runs a little over 14 mph with some tall 20.8's....I'm moving up to a 38-35 gear.. |
Re: 8-10 mph gearing
|
Guest
|
Can I get some contact info interested in that gear you are taking out. |
Re: 8-10 mph gearing
|
What I Know
|
It will do you no good if you are running a stock 26-47 constant mesh..Mine is 28-45 constant mesh.. |
Re: 8-10 mph gearing
|
?
|
I assume with that gearset you do not have direct |
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Our newest member Jacklovik2009