Page 1 of 1 Pages: 1
Results 1 - 9 of 9
I know I've seen them somewhere for sale. I'm looking for the machined manifold or whatever you want to call it to remove the trans cooling lines the run from the MCV on a 1066 up to the radiator. Cannot find it for some reason now.
Thanks.
by
fulldraw68
-
Forum
Got an IH 466.
I was wandering what you guys that are running cams with enough lift that you need more clearance on your valve cover? I know I can get the Hypermax...but I'm not wanting to spend $500 on a valve cover. How about extra think gaskets? What about getting a CNC shop to cut a 1/2 steel girdle steel to raise it up and putting thin gasket on each side? Any ideas or things that
by
fulldraw68
-
Forum
Turbo1...so you don't think it's even worth running the inlet out ot the side or front of tactor for better air?
by
fulldraw68
-
Forum
Need some info on best option for pulling air into the turbo. Running an IH 1066 w/ 466 and an S300 turbo. Still have stock radiator setup in tractor so not too much room between turbo and radiator hose. Was going to mount guillotine to turbo then 90 out of guillotine out to left side(if setting in seat) of tractor using 4" hose and pipe attaching a horn to the end of pipe so it just stuck out
by
fulldraw68
-
Forum
Thanks for all the info. I think I'll go with the toggle or on/off rocker switch. I just don't like the idea of having to hold down the momentary switch all the time I want the TA in high.
by
fulldraw68
-
Forum
OK...so if I get a Hurst with the momentary button I want to make sure I understand how this will work with the electric TA shift silenoid. With a momentary button the circut is closed so no power to the silenoid...right? Push of the button opens the circuit which will activate the silenoid and shift the TA into HIGH side. I will not have to hold the button to keep the TA in HIGH side will I?
by
fulldraw68
-
Forum
anyone out there make a throttle handle with a push button in the top of it to control the TA?
Thanks.
by
fulldraw68
-
Forum
Wanting to build a set of aluminum side sheilds/covers for our 1066 puller. Can you guys send me pics of ones you have and how they fasten to the tractor?
Please text pics to...
five 7 three 6 four 4 three two 6 7
Thanks.
by
fulldraw68
-
Forum
My son and I started pulling our 1066 in the 10500 11500 and 12500 heavy farm classes this year. We are needing to fabricate some wheelie bars and a rear weight bracket and adjustable hitch. I'd appreciate any and all pics anyone can send to give us some ideas. Please send pics to fulldraw68@embarqma
by
fulldraw68
-
Forum