Page 2 of 2
Pages: 12
Results 31 - 46 of 46
I know the top tractors aren't stock I even have a pretty good idea on what their turning. I place last year a few times with the setup I have. Just wanting a little more to were I dont have to pull the t/a like I have to sometimes in the 6500lb class. I have two others i pull in the bigger classes so no extra money for the 400 this year. Next year I'll stroke it. I heard a w-9 carb wou
by
oliverguy1990
-
Forum
Has electronic ignition hotter plugs high compression pistons turns out 55 to 57 on the dyno will more fuel help it or what else can I do before spending a lot of $$$
by
oliverguy1990
-
Forum
Well fifth and sixth would be 1st high and second high
by
oliverguy1990
-
Forum
So guessing with a 1066 414 with about 230cc and 5x13 injectors with an 88 housing
Probably wouldn't turn it in a 5 to 8 mph class
by
oliverguy1990
-
Forum
How much fuel does it take to run an s300
by
oliverguy1990
-
Forum
Do you know what size exhaust housing that s200 is mines a .83 I believe
by
oliverguy1990
-
Forum
And what size s200 do you have on your 1086
by
oliverguy1990
-
Forum
I'm guessing at 255 high 1st is about what you can run?
by
oliverguy1990
-
Forum
I cant run any water. And I eventually will put a 13mm pump and injectors I already have an s300 with an .88 divided housing but I'm pretty sure stock pump wont spin it thays why I was gonna put the sxe257 on for now
by
oliverguy1990
-
Forum
Turbo would be a sxe257 borgwarner and I'm I'm having pump guy doing something with the dilevery valve removing fuel plate adding shim and something with fuel controller he thought it would be somewhere around 210 to 250cc and then the 5x13 injectors
by
oliverguy1990
-
Forum
How much power can you get from a 1066 with 5x13 injectors with a 10mm model 100 worked over
by
oliverguy1990
-
Forum
Ok I just need to get my perkins sold and an 8.3 found then
by
oliverguy1990
-
Forum
How hard is it to straight shaft it by getting rid of 2 speed?
by
oliverguy1990
-
Forum
I'm located in central Missouri. Does some of the frame have to be cut down to get it to fit?
by
oliverguy1990
-
Forum
How hard would it be to fit an 8.3 cummins into an 1850 oliver
by
oliverguy1990
-
Forum
Does anyone know what's the most cubic inch and how to get there on a 354 perkins basically how much can you bore it out
by
oliverguy1990
-
Forum
Page 2 of 2
Pages: 12