Here are the last toys Ive built. These were fathers day gift for Brice Terry. These were alot of fun to build and to keep secret till now. They turned out awesome I thought. The Terrys are awesome people with a Beautiful D21. Thanks again.
Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
I have them in any thickness with Orings. A 1 inch spacer with orings is $300 shipped to ya.
Thanks Justin Stuckenschneider 5737212853
by
JustinStuckenschneider
-
Forum
Here is the latest toy puller I just built. Its a 4620 limited prostock. Didn't build it after and specific tractor. Just kinda threw some ideas together and this is the out come.
Enjoy Justin
by
JustinStuckenschneider
-
Forum
Here is the last puller I put together. Going to put this one on the shelve for now. Kinda built this one to resemble the Total Recall 2 New Holland owned by Travis Gordon.
Enjoy Jstuck
by
JustinStuckenschneider
-
Forum
Ive been working on these off and on since Gville. Finally got them done. Wanted to share some pictures of them.
Enjoy Justin
by
JustinStuckenschneider
-
Forum
Here are the latest toys to roll out of the Stuck shop. Buddy had me build one for Bryan Gerlings bday. Just wanted to share some pictures of it.
Enjoy
Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
Here is last toy I finished up. This one is going up to the Lemke residence! Just wanted to share some pictures of it.
Enjoy Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
Just wanted to say thanks to Klint and his crew! They put on another heck of a show this year. We all had a blast and we raised $1000 dollars from the toy raffle to donate to the Dream Factory Foundation! Dustin Hart was the winner this year. Can't wait for next year!
Thanks again to all who bought tickets for a good cause
Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
If you have any friends going, you can have them buy you a ticket. You have to purchase tickets at my booth in gordyville. Thank you
Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
Thank you! Will you all be attending this year as well?
Justin
by
JustinStuckenschneider
-
Forum
Every year for the past 4 years, ive been doing a toy raffle at my booth in Gordyville. This year I built Lemke's 4010 New Generation Plus. I changed the name to Dream Factory Express, because we will be donating 1/2 the proceeds to the Dream Factory Foundation. Tickets will be sold Thursday through Saturday evening. The raffle will be drawn towards the end of the night Saturday. You don
by
JustinStuckenschneider
-
Forum
Montgomery city
by
JustinStuckenschneider
-
Forum
Haha bring it on buddy ol pal... Make sure your bring your liquid pork chop appetite. Gunna be a good time! wooo
Tickets will be sold at my booth that I usually set up on right side of finish line. You have to be present to buy a ticket, but don't have to be present to win. Tickets are 3 for 5dollars or 7 for 10 dollars.
All the lemke toys are spoken for as far as I know.... Thanks J
by
JustinStuckenschneider
-
Forum
Here are some of the latest toys I have been working on. First one is the D21 owned by JR Ground.. Just waiting on decals to get done to finish them off. Turned out very sharp
Next one is a custom MX ive been wanting to do for awhile. It is detailed out as much as i could do. I still got some little things to add, but ran outa time.
Last is the toy ive been building
by
JustinStuckenschneider
-
Forum
Those Missouri 4.1's were running pretty hard this summer... Can't wait!!!
by
JustinStuckenschneider
-
Forum
Here are the finished pictures of Jame Giese's Hicktown Hurricane. Everything turned out awesome on this one. Very happy with it.
Enjoy
Justin
by
JustinStuckenschneider
-
Forum
Havent had much time to work on toys because of harvest, but we got done a couple weeks ago. Im working on a 1066 for James Giese out of Alma Center, WI. While decals are being made for it, I started on two 7810 john deeres for Jerme Roberts called Wicked Whitetail.
Enjoy Justin
Jeremys tractor
by
JustinStuckenschneider
-
Forum
On aluminum a 2 flute high helix works best. If you are just using a manual mill for simple machining spray WD40 on the end mill ever so often. It works amazing to keep the aluminum from sticking to the end mill. For CNC machining a oil based water soluable coolant is what I use. Like stated above Feeds and Speeds are your best friend for making an end mill last. As far as brands go.. Spend the
by
JustinStuckenschneider
-
Forum
Congrats... hope you all have a safe harvest
Justin
by
JustinStuckenschneider
-
Forum
Thought about it, but I knew that it wasn't on there the last time I was up at stuartes. Maybe I should put a pink on on there.... haha
by
JustinStuckenschneider
-
Forum
Here are the latest toys I have been working on. Been busy in the field and stuff but finally found time to get some paint and decals on. Everything is custom fabricated or molded on these tractors other than the hood. I started with a hood off the ertl 966 dealer editions. Molded my own rear end housings and rear weights. Everything else is fabricated from steel. Custom machined the front and r
by
JustinStuckenschneider
-
Forum
You could just machine some off the bottom of the rocker arm stands, to get more adjustment or longer push rods as stated above.
by
JustinStuckenschneider
-
Forum
$100 for the throw out bearing holder and $60 for the helmet holder.
Thanks Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
Hey hey..... Looky at that green turd... Haha Just joking. Sure does look mighty fine with sum custom rims on the back there. Those things sure do have some potential if we could just get some 20.8-38 double cuts....... Hmmmmm....
Justin
by
JustinStuckenschneider
-
Forum
I have a 1/2 inch aluminum plate that the seal presses in. Only works on 706 rear end housings though.
Justin Stuckenschneider 1-573-721-2853
by
JustinStuckenschneider
-
Forum
Got the decals all done on the toys. Still waiting on parts to finish the other ones. Turned out great. Can't wait to get these up to the real ones and take some pictures. Thanks to Rod for letting me build their tractors.
Justin Stuckenschneider
by
JustinStuckenschneider
-
Forum
Here is one of the toys all put together. Just need decals now.
Jstuck
by
JustinStuckenschneider
-
Forum
HAHA These models won't have action figures or detailed motors. Hope to have the rollcages made and done soon. That will really make them look good!!
Jstuck
by
JustinStuckenschneider
-
Forum
I had a local shop with a water jet cut out the frame rails, this way they wheel base and length on all the toys are the same.
And here are some progress pictures
Just thought I would share with you all how much work is putt into making some of my toys. I hope to get them done and painted by next week.
Thanks Justin
by
JustinStuckenschneider
-
Forum
With a billet carrier, you get about another 3/8 of an inch of adjustment. Then when machining the cross shaft for clearance for the weights on the clutch, it really weakens that stock cross shaft. If it was mine I would upgrade both. I have a billet carrier and after market cross shaft and fork if you are interested. Very well priced too.
Thanks Justin Stuckenschneider
1-573-721-2853
by
JustinStuckenschneider
-
Forum