What are classes dnd times for Friday and Saturday?
by
Mark
-
Forum
How many will be there. Any ideas? hopes it a good turn out and showing
by
Mark
-
Forum
tourqe is a big factor in power you can have same hp but less tourqe
by
Mark
-
Forum
cant bounce a flat basketball farm a bfg should be around 16 harder you spin it you can go down fire stone will work with lower pressure
by
Mark
-
Forum
measure a new deep tread
by
Mark
-
Forum
any results from NC last night?
by
Mark
-
Forum
better injectors also
by
Mark
-
Forum
I get a little worked up when people want a 466 limit. what about case white Minnie massey deere ih duetz Hesston etc all have bigger. super farm started in 80s as farm tractors with improvments,13 mm, 450 rosa masters etc none cuts pto and hydrolics. they keep advancing and creating more power progress. every class keeps advancing all the way down to stock
by
Mark
-
Forum
than you get my 6030 runs 2350 and the 2255 runs 2850
by
Mark
-
Forum
dynos don't work tried that in the seventies people were turning pressures down and had 1066s with 100hp that were pry 3-400 than.10-12 mph any size tire on factory cast,18.4x42 or20.8x38 on pressed steel, stock appearing pump and 3lm or equivilant,3000rpm. a lot of tractors some have work done and don't dominate class.you can say its boring but there are different venues of pulling,ju
by
Mark
-
Forum
farm stock should be that stock with pump turned up spend money and pull 2hot2 farm or improved farm what ever is in your area. as for boring go to the big pulls if you want to see speed farm pulling shouldnt be fast. 2nd high in a 1066 is aroun d 12 m,ph at 3000rpm depending on tire size and should have to pull ta in farm classes every one one should be able to pull and compete there are levels
by
Mark
-
Forum
silo winch or silo unloader gear box
by
Mark
-
Forum
no body likes speed limits but that seems to keep some out and keep it.closer you have to just be forward and say you dont belong in the farm class than there is people who put p pum,ps on because another model uses it or intercoolers. your always going to have 13mm 100s bigger plungers in inlines turbo mods and intercoolers
by
Mark
-
Forum
call 608 482 0745 may have a tranny for sale
by
Mark
-
Forum
how do you apply or invite only
by
Mark
-
Forum
is there a class this year?
by
Mark
-
Forum
call dennis at FVP 608 643 0200
by
Mark
-
Forum
any info on the viola pull classes,pulling order, etc
by
Mark
-
Forum
is 13000 3lm or 3x3 or what please clarify
by
Mark
-
Forum
Platteville dairy days sept 10th farm and limited pro and 466 hot farm I believe
by
Mark
-
Forum
2hot2 farm is same as all year and 9000 has been added
by
Mark
-
Forum
this is a good pull and pays good plan on attending
by
Mark
-
Forum
think it might be good to try at a few pulls see how the weights work out
by
Mark
-
Forum
thurs day farm pull and sat Badger State
by
Mark
-
Forum
at meeting we decided to make a to hot to farm no cut tires 19 mph and still have open class, and 12 mph on 13000 farm thurs nite any questions please call a member of commitee
by
Mark
-
Forum
please constructive comments only. looking for ideas
by
Mark
-
Forum
what would you suggest 1 caller wants 6mph some want 10-12 some dont want any limit? so its not fair for a couple opens to dominate but tractors that run 2 hot 2 farm should be able to run farm because of no speed limit,tell us where to draw the lines any civil suggestions welcome
by
Mark
-
Forum
Is Lone Rock having a pull the 4th week end and if so what classes and rules
by
Mark
-
Forum
who quit having it?
by
Mark
-
Forum