Page 2 of 2
Pages: 12
Results 31 - 52 of 52
Here are the Safety Equipment Rules required per our insurance....we have a new insurance company this year and the Safety Rules below have to be enforced.
Anyone pulling Improved Farm BRING HELMETS!!!!
Thanks in advance
River Falls FFA Alumni
General Safety Equipment (Required for Light Open, Heavy Open, and Pro Farm Classes)
All tractors must be equipped with the following sa
by
River Falls FFA Alumni
-
Forum
Here are some updated pics of the pull grounds!!
by
River Falls FFA Alumni
-
Forum
2016 Pics not 2017!
by
River Falls FFA Alumni
-
Forum
Here is pics from 2017 Pull!!
by
River Falls FFA Alumni
-
Forum
Why don't you run improved and pro farm together? Just call it the 20.8 class...
We decided to keep the 2.8 and Pro Farm class separate again this year based off the number of hooks in each class last year
No 5500 0r 6500 farm stock?
There will be an antique tractor pull on Sunday July 16th...more info along with classes to follow: Contact Pete for more info on the Antique Pull
by
River Falls FFA Alumni
-
Forum
Last year there was 5 tractors in the 7500 Light Open and 2 tractors in the 7500 Heavy Open. It was our understanding that the tractors that pull in the 7500 Light Open normally pull in the WTPA Light Limited Super Stock Class. As far as the tractors in the 7500 Heavy Open, we would have them pull in the FFA Alumni 8500 Heavy Open. With having the WTPA Classes this year we had to eliminate a few
by
River Falls FFA Alumni
-
Forum
River Falls FFA Alumni Truck and Tractor Pull - July 15th 2017
WTPA Sanctioned Classes
Light Limited Super Stock
Super Farm
Light Pro Stock
FFA Alumni Classes
Farm Stock Non Turbo
7,500 - 75 Factory rated horsepower (5 mph) Max Tire - 18.4x38
9,000 - 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38
Farm Stock Turbo
11,000 - 8 mph
12,500 - 8 mph
14,
by
River Falls FFA Alumni
-
Forum
Results for 2016 River Falls FFA Alumni Pull
Thanks again for all of the Support!!
by
River Falls FFA Alumni
-
Forum
Picture from Drone
by
River Falls FFA Alumni
-
Forum
The River Falls FFA Alumni would like to thank everyone that came to the River Falls Day Pull! Thank you fans, pullers, promoters, and sponsors!!!
A huge Thank You to Total Excavating - Chris Kusilek for making this new location happen! Chris did an awesome job with the site preparation and the track was awesome!
There was a total of 232 hooks!!!
We wanna extend a huge thanks to everyone
by
River Falls FFA Alumni
-
Forum
Start time : 5pm
by
River Falls FFA Alumni
-
Forum
To respond to "BS" and "Another Puller"...if you have an issue with our rules or how we are running our pull please contact us directly vs going on a public forum and expressing your opinion. Please realize that this is the River Falls FFA Alumni pull which consists of over 30 members who all take time out of there personal life to put this event on..it takes a lot of hard work and dedication fro
by
River Falls FFA Alumni
-
Forum
Pictures of the track!
by
River Falls FFA Alumni
-
Forum
Seen the flier. What's with the no ecno mods?? Would like the seen them able to pull in the 6500 open class
If you wanna pull in Open and come support our FFA that would be awesome!
Can someone explain to me why the 6500 and 7300 OPEN class is restricted to a 3.0 turbo size? Isn't open mean open? Please explain?
We had a lot of requests to have a Light Open Class with a 3x3 Tur
by
River Falls FFA Alumni
-
Forum
Rules - 7 years ago
River Falls FFA Alumni July 9th 2016 Tractor Pull Rules
Tractor General Rules
1. Be a Professional. Must have tractor registered before class starts. No exceptions made. Can call ahead of time to get registered if your tractor is arriving late.
2. Pullers must be 18 years of age or older to participate. Minors must have parent or Guardian consent forms signed. No one under the age of 18 wi
by
River Falls FFA Alumni
-
Forum
Here is a map for parking
by
River Falls FFA Alumni
-
Forum
Due to the interest we will be adding 2 hobby stock classes: Classes will be 100% payback
Rules Below
Hobby Stock
5,700/6,200 lb
1) All General Rules apply.
2) Maximum Tire size: 20.8 x 38.
3) Motor- OEM engine block and head.
4) Tractor must have OEM engine block, cylinder head, transmission, and rear-end casing.
5) Any carburetion is allowed on NA engine. No fuel in
by
River Falls FFA Alumni
-
Forum
Here is Parking Lot/Pit Parking
by
River Falls FFA Alumni
-
Forum
Directions To Pull Site
Highway 65 North: On Highway 65 North take the River Falls Exit, Take a right at the Stop Sign and the next left on frontage road "Huppert Street"
Highway 65 South: On Highway 65 South take a right on "Huppert Street"
Main Street in River Falls: On Main Street drive until North Main Street turns into Highway 65, go over Highway 35 and take left on "Huppert Street
by
River Falls FFA Alumni
-
Forum
River Falls Days Update:
Here is some updated pictures of the new location for the 2016 River Falls FFA Alumni Tractor Pull!
New Location Address:
Located behind Total Excavating
141 State Road 35, River Falls, WI 54022
A huge Thank You to Total Excavating - Chris Kusilek for making this new location happen!
Questions/Directions Call:
Ryan 715 821 7676
Pete 715 821 7800
by
River Falls FFA Alumni
-
Forum
Payouts for the 2016 River Falls FFA Alumni Tractor Pull - July 9th
Farm Stock Non-Turbo 1st $50 2nd $40 3rd $30
4500
5500
7500
11000
9000 1st $200 2nd $40 3rd $30
Farm Stock Turbo 1st $50 2nd $40 3rd $30
10000
11000
12500
14000
Light Open 1st $300 2nd $200 3rd $150 4th $100
6500
7300
Heavy Open 1st $500 2nd $200 3rd $150 4th $100
7500
8500
9500
Light I
by
River Falls FFA Alumni
-
Forum
River Falls Days Update:
Here is some pictures of the new location for the 2016 River Falls FFA Alumni Tractor Pull!
The track is complete, the parking lot/pit area is still under construction. The track is close to 400 ft long and a 100ft wide!
The project will be complete very soon...will update pictures once construction is done with the new location
New Location Address:
Loca
by
River Falls FFA Alumni
-
Forum
Page 2 of 2
Pages: 12