Page 1 of 1 Pages: 1
Results 1 - 14 of 14
What are others doing about insurance on your tractor during transportation and storage. I have Country Companies insurance for my farm and they informed me that they will not insure the value of my tractor because it is modified. They will insure our restored collector tractors as they are restored to original state. Thanks.
by
Skidoomckag
-
Forum
I’ve been looking for a used wedge or channel frame with front end and steering for a 66 series. I’m finding that people have them priced all over the board from $1000 - $3000. My question is what is a fair price for one in good condition? New ones with steering seem to be priced in the $3-$3500 range. I realize that new require paint and other small modifications to fit my particular set up. It
by
Skidoomckag
-
Forum
I'm running double cut Bias Ply 20.8s on Keizer's on my 9500 Profarm. I know that they aren't ideal, but since I had to build a new motor, radial tire money isn't in the budget for this year. Does anyone else still run them and if you do, at what pressure. We are currently at 14 psi, but going to drop the, back to 12 1/2 for next hook. Motor is running good and we are in the
by
Skidoomckag
-
Forum
I am building a new 1466, 466 3x3 profarm. How much horse power is used running a stock hydraulic pump? Has anybody eliminated the stock hydraulic pump from their tractor and used a self contained electric pump to run stock power steering? Thanks
by
Skidoomckag
-
Forum
I'm building a new ih 466 Profarm motor. Class in my area is limited to 3x3 turbo (out of box gt42) and 3000-3500 rpm's. I'll be running a Scheid p7100 pump and water injection in cross pipe. I know a girdle is good insurance, but it's pretty cashy. Is it worth the added expense in my situation??
Thanks
by
Skidoomckag
-
Forum
I bought an ih too hot to farm with an older 540 (5-7 years) kit. It has billet pistons and machined Case 504 sleeves with a shim ring between the block and sleeve top. It does accommodate a Hypermax head gasket. The engine builder said that the kit came from a machine shop in northeast Iowa and that they sold several of the kits, but he can't remember their name. Can anybody help me out wi
by
Skidoomckag
-
Forum
I have also heard I should drive out freeze plugs and use a leaf blower to blow through them between hooks. Do I need to make some type of manifold to plug into them, then connect the leaf blower to it? I tend to over think things
by
Skidoomckag
-
Forum
Thanks.
by
Skidoomckag
-
Forum
Where do you place oil temp sensor?
by
Skidoomckag
-
Forum
Thanks for the input.
by
Skidoomckag
-
Forum
How many profarm 466, limited rpm guys run a dry block? Sure seems to me to make things a lot simpler, but will they live?
Thanks
by
Skidoomckag
-
Forum
Any suggestions on a better one? I've heard bad reviews on fluid dampeners too.
by
Skidoomckag
-
Forum
Does anyone have any experience with ATIs super damper on an IH 466 profarm 3500 rpm tractor?
by
Skidoomckag
-
Forum
Has anyone had any experience working with Rochester Diesel on a 3x3 Pro farm p pump, set up?
Thanks
by
Skidoomckag
-
Forum