Page 2 of 2
Pages: 12
Results 31 - 52 of 52
. - 8 years ago
.
by
AC 7040 PULLER
-
Forum
its at the rice lake fair grounds. just note that the classes are spread far apart. like 9000 to 12500 to 14500 . ..
by
AC 7040 PULLER
-
Forum
what head gasket do i need to run for the 7.8 head? And can any machine shop bore my injector holes to fit my cav injectors?
by
AC 7040 PULLER
-
Forum
1986 ford 6.6 truck manifold. they sit upright and are the even flowing
by
AC 7040 PULLER
-
Forum
Great place to work with, running their injectors in my tractor and having my pump getting done there. Would recommend them to anyone.
by
AC 7040 PULLER
-
Forum
I have a 10.5 Simms being built currently at Wimer fuel. I have 5x.18 injectors already, I have a 9600 intake for better air flow than the N/A intake. Just got a twin scroll tw5 manifold for this year, I am wondering if I put a 3LM housing on an hx50 I have will I be able to spool it at a reasonable rpm? This is all on a 401 ag block and head.
by
AC 7040 PULLER
-
Forum
I got a 69 8000 wanna put dual power in it.
by
AC 7040 PULLER
-
Forum
Is it possible to put dual power in a ford 8000 that did not have dual power from the factory? I know the housings are different but wondering if they can be swapped
by
AC 7040 PULLER
-
Forum
I am going through my last year in college and wanting to do some engine work in my last year. Wondering what kind of rods will work to bump up a 401 ag block with a 474 crank shaft with cat 3208 pistons. I know i would have to bore my block and sleeve it to a 4.5 bore and grind my lower block to clear rod throw. Also if a stock cam that is being ground would still work with this set up. Also won
by
AC 7040 PULLER
-
Forum
I am going through my last year in college and wanting to do some engine work in my last year. Wondering what kind of rods will work to bump up a 401 ag block with a 474 crank shaft with cat 3208 pistons. I know i would have to bore my block and sleeve it to a 4.5 bore and grind my lower block to clear rod throw. Also if a stock cam that is being ground would still work with this set up. Also won
by
AC 7040 PULLER
-
Forum
Its to far north and on a thursday night
by
AC 7040 PULLER
-
Forum
That would be my ford. It weighed 9700
by
AC 7040 PULLER
-
Forum
Ok thanks
by
AC 7040 PULLER
-
Forum
Running 3200 rpm
by
AC 7040 PULLER
-
Forum
I gotta 8000 with the 9.5 pump and 5x.18 injectors from Wimer and the pop off is 3750, wondering what i should do for timing. It is rather hard starting, cranking only at 200 rpm but it takes a few seconds for the engine to get up to rpm, 40 degree weather also had new head gasket and valve job
by
AC 7040 PULLER
-
Forum
Ended up being the a broken bolt that holds the chassis together on the lower end behind the hydrolic pump, and the bolt right across it was loose. My M had corn picker mounts on it which also held it together on the chassis, when i took them off the tractor actually split about an 1/8 apart behind the hydrolic pump.
by
AC 7040 PULLER
-
Forum
I have a farmall m I just completely rebuilt with the over bore kit. Dynoed and broke in today. Picked up tractor with locked up engine. While I was dynoing the pto would slip out I held it in place and had no problems then but was kicking out wjen there would be a loud clunk kinda sound in about the belt pto area and would do it more with less load around 20hp and do it only once in a while at 4
by
AC 7040 PULLER
-
Forum
that sled used for semis was not a good idea, im pretty surprised not one got hurt
by
AC 7040 PULLER
-
Forum
My idea was more on setting up a switch to turn on the electric pump when i go up to the track and just run off of the mechanical pump when im not pulling. Only a 15psi pump, but my pump is stock other than its a 9.5. Seems to had good power but it loves 2400rpm the extra rpm seems almost pointless. It will lug down to about 1400 to 1200 and spin out if its a hard track. mostly just wondering if
by
AC 7040 PULLER
-
Forum
I am running 3200rpm i set my timing at 28 degrees now, last year i had a lot of flame was at 26. Just wondering if the fuel pump would gain anything
by
AC 7040 PULLER
-
Forum
Would it hurt to run a 15psi electric pump though the mechanical pump on my 9.5? Stock pump off of tw 35 have 5x.18 injectors, trying to get more fuel timing set at 28 degrees
by
AC 7040 PULLER
-
Forum
would it hurt to run a 15psi pump though the mechanical pump on the 9.5 simms? Just have the stock mechanical pump on my 9.5 pump on my 8000 looking for more fuel got 5x.18 injectors also timing at 28 degrees. Pulled last season at 26 had a lot of flame blew the head gasket but it was factory, has new gasket and valve job.
by
AC 7040 PULLER
-
Forum
Page 2 of 2
Pages: 12