Building a 806 puller September 04, 2011 10:58AM
I am building 9500 prO field p pump 3000 rpm tractor I am using a dt466 I have + head if it matters a big lifter block. Rules say I have to use a gt4202 3 inch box turbo Push in slugs may be used.Or a Alternate turbo may be used but can only have a 2.75 inlet with no slugs.466 cubic inch limit. My question is what pistons,and head work need to be done. I see alot of them just go down the track and fall under turbo when the sled hits any info be real nice thanks
Reply Quote

Re: Building a 806 puller September 04, 2011 11:50AM
Check book will determine that
Reply Quote

Re: Building a 806 puller September 04, 2011 12:30PM
I kinda figured that
Reply Quote

Re: Building a 806 puller September 04, 2011 01:17PM
You really need to give Vinny a call, he's the top guru with the T-04 type of classes! Bouncing Don't have his # however I'm sure someone on here does.
Reply Quote

Re: Building a 806 puller September 04, 2011 03:41PM
Who is vinny ?
Reply Quote

Re: Building a 806 puller September 05, 2011 12:54AM
Alot of tractors get under the turbo when they try to run crazy tall gears.

I would think you'd want a little bit of head work, and depending on the cam you use for 3000 RPM class, the valve relief cuts in the pistons. I was told the older truck pistons or tractor pistons would be the way you want to go.

Are you required to run a slug? You said it was a 2.75 inlet rule?
Reply Quote

Re: Building a 806 puller September 05, 2011 02:30AM
AAR!!!
Reply Quote

Re: Building a 806 puller September 05, 2011 05:32AM
Pirate??
Reply Quote

Re: Building a 806 puller September 05, 2011 08:19AM
That u Josh?
Reply Quote

Re: Building a 806 puller September 05, 2011 05:29AM
Not required to run slug if it's a 2.75 turbo or a Gt4202 3 inch box turbo
Reply Quote

Re: Building a 806 puller September 05, 2011 11:19AM
I'd run the GT 42. Avoid the slug if you can...I hear the GT is a pretty good charger.
Reply Quote

Re: Building a 806 puller September 05, 2011 11:28AM
TOM i see you are selling pumps and various parts, may i ask what your plans are?
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,628, Posts: 229,690, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,899.

Our newest member JD_8520