04:07:30pm, Thursday, May 16, 2024
light jd axle housings
|
deere puller2
|
I am thinking about putting the light 4010 axle housings on my 4430. Besides unbolting and bolting the 4010 axle housings on, what all needs to be done. How much weight will it save me and is it 10% faster? What is the part number that I need to look for and about what do they cost? Thanks |
Re: light jd axle housings
|
Registered: 03/12/2010 Posts: 405 |
Look this topic up in search. This was all talked about a few months ago. |
Re: light jd axle housings
|
deere puller2
|
Not coming up with the answers to some of my questions off a search. Looks like it might be 13% instead of 10% faster, but the rest of the answers I can't find on a search. Any other help would be appreciated. |
Re: light jd axle housings
|
Deere puller2
|
Any one have anything? I searched for the part number and can't find it. |
Re: light jd axle housings
|
Registered: 03/12/2010 Posts: 405 |
What do you need to know? |
Re: light jd axle housings
|
deere puller2
|
A part number would be a great start, I was also wondering about the increase in speed which looks like maybe 13%, any weight savings and how much they cost. Thank you for the reply. |
Re: light jd axle housings
|
Registered: 09/14/2008 Posts: 9 |
Workin off memory but i seem to remember its around 90lbs per housing. I have a set on a 4010 in the shop right now, i'll get casting number and post later. |
Re: light jd axle housings
|
Registered: 06/12/2011 Posts: 37 |
pt number R26010 if my memory is not faulty. never weighed any so do not know the difference, however it is significant. |
Re: light jd axle housings
|
I have some near Norfolk,Ne 200.00 Keith 402/750-8652 |
Re: light jd axle housings
|
cotton picker
|
I just bought a complete set of 4010 finals planing on chaning my 4430 also. I was told that i would have to do a small amount of grinding on the 4430 axle housing but other than that they should work as long as you have the complete set of 4010 final including brakes. You should be around 10% faster not sure how much lighter. hopes this helps u deere puller 2 |
Re: light jd axle housings
|
Anonymous User
|
you also have to lengthen the pockets were brake plate retainers set in, they are in a little different place on 4010. did a set last summer, not hard but time consuming. |
Re: light jd axle housings/? for jd402056
|
cotton picker
|
I don't understand about lenghtening the pocket for the brake plate retainers. If you don't mind calling i would apprecitate it 678 446 8344. |
Re: light jd axle housings/? for jd402056
|
Anonymous User
|
cant get through,just get a loud ring. 724 263 7481 call me. Edited 1 time(s). Last edit at 01/18/2012 11:59AM by jd402056. |
Re: light jd axle housings/? for jd402056
|
Anonymous User
|
the dial pins that hold the brake backer plates in the axle housing are located a little different. you have to move them i think about 5/8 in.just make notches in housing a little longer.you will see when you go to fit them up. |
Re: light jd axle housings
|
Anonymous User
|
Axles are diifferent size |
Website Statistics
Global: Topics: 38,769, Posts: 229,936, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,026.
Global: Topics: 38,769, Posts: 229,936, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,026.
Our newest member Jacklovik2009