09:55:33pm, Friday, May 17, 2024
finding sisu engines in the u.s.
|
ltsspuller
|
How difficult is it to find sisu engines? Burnt combines etc.? Also is there anyone with experience with these motors that would be willing to help and advise me on building one? |
Re: finding sisu engines in the u.s.
|
Anonymous User
|
Which one do you want.. The 513? |
Re: finding sisu engines in the u.s.
|
ltsspuller
|
I want to use it in a light super at 504. There is a smaller one in the 400 cube range I think? Would like to talk to someone to learn more about them of I could. |
Re: finding sisu engines in the u.s.
|
EDWIN
|
Hi
It;s not in the Us,but meaby you find it over here [www.leenders-parts.nl] |
Re: finding sisu engines in the u.s.
|
Anonymous User
|
ag chem floater's have been running them for years now. I think the whole ag chem product line is running them now. |
Re: finding sisu engines in the u.s.
|
Registered: 02/22/2010 Posts: 5 |
I have a few that I would be willing to part with some of the parts, they came out of burnt tractors and thats the olny way I could get them at the time and they are hard to find and not cheap ether.
Robby Crutchfield 3364510108 |
Re: finding sisu engines in the u.s.
|
Anonymous User
|
Agco started putting them in their combines around 5 yrs ago. I went to the combine school when I worked for an ag dealer but they didn't go over the engine much. Agco bought sisu so I would try an Agco or Massey dealer, they might have some info or know how to get their hands on one. |
Re: finding sisu engines in the u.s.
|
Registered: 09/23/2008 Posts: 633 |
call slade sissom at Mid Tn equipment in Woodbury Tn he has a brand new 7.4 liter sisu, sitting on a stand, or maybe nolt equipment in Pa he has a couple of junked out big masseys. |
Re: finding sisu engines in the u.s.
|
paris mo
|
Talk to the boys in Paris mo, they were running a valtra for a couple years in the lim pro class. Haven't seen the tractor for a couple yrs now. What happened to it? |
Re: finding sisu engines in the u.s.
|
Anonymous User
|
Is this the engine Shrameck is running ? |
Re: finding sisu engines in the u.s.
|
nope
|
younglbood runs the tried and true allis chalmers 426 motor |
Re: finding sisu engines in the u.s.
|
fan69
|
It's what the Batliner's are running in thier SF Massy.. |
Re: finding sisu engines in the u.s.
|
agchem
|
Ag Chem floaters have only used them for TWO years now, not several years. Only used with the "CVT" transmission. Engines from 2007 thru 2010 were C9 Cat. |
Re: finding sisu engines in the u.s.
|
Humm
|
What is the bore and stroke on these motors? What kind of stock cubes do they offer? |
Re: finding sisu engines in the u.s.
|
Anonymous User
|
is an engine out of a burnt tractor/combine a good choice? or does the heat put stress on the block? |
Re: finding sisu engines in the u.s.
|
Registered: 03/27/2008 Posts: 508 |
depends on how burnt? and if the local FD tried to put it out? was told when cold water hits the hot motor,will cause cracks since differing metals will shrink at different speeds? Am sure others will offer opinions on this as well? |
Re: finding sisu engines in the u.s.
|
Registered: 01/20/2010 Posts: 30 |
Hi, I am one of the guys from Finland that was involved in developing theese engines for pulling.
The 634 7,4L engine is the only one we ever used. Stock bore is 108mm and stroke is 134mm. We used 115mm bore that took us real close to our 510cui limit. For info on special parts check out my facebook page: Eagle Clutches Or www.eagleclutches.com or e-mail: eagleclutches@netikka.fi or call: +358 500 262714 Christer Orn Edited 1 time(s). Last edit at 03/21/2013 08:25PM by Sascha. |
Website Statistics
Global: Topics: 38,776, Posts: 229,946, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,032.
Global: Topics: 38,776, Posts: 229,946, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,032.
Our newest member Jacklovik2009