JD help June 26, 2012 12:02PM
What water manifold do I need to clear the 50 series exhaust manifold AND allow me to bolt a 3LM on? Looking at the parts books, the 30 series water manifold and 50 series are the same , or do I have to make my own set up?
Thanks for the help...
Reply Quote

Re: JD help June 26, 2012 01:27PM
You can get a front mounted water manifold from John Deere. The part # is R91604 or R99864 depending on your serial number. You'll also have to get the smaller pieces on the parts sheet to make it work. I did this on a 4650 with a stock 3lm.
Also used a 55 series exhaust manifold and took off the intercooler.
Reply Quote

Re: JD help June 27, 2012 03:26AM
I just made a 1" spacer to fit under turbo or between where turbo bolts to manifold
Reply Quote

Re: JD help June 27, 2012 08:57AM
we just made a couple plates to bolt to the ports on the head and used 1" hose in place of the water manifold, worked real good
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,779, Posts: 229,954, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,037.

Our newest member Jacklovik2009