building a 3000rpm August 20, 2012 02:27PM
Wanting to build a 3000rpm tractor. I have a jd4430 quad with a 55 series motor out of a 9500 combine with a three disc clutch. Have no idea what i need to do to my tractor and motor. Any help would be great. thank you.
Reply Quote

Re: building a 3000rpm August 21, 2012 01:07AM
Where is it that you pull at? What are the rules? You have a very good start with what you have.
Reply Quote

Re: building a 3000rpm August 21, 2012 02:28PM
im in nebraska and the rules are: 3lm,466 out of the box,2 5/16" intake with a 2.750x3.5 bolt pattern. 466cu,[ water to air,air to air (whats the mean)]
A pump 10mm plunger. Thanks for any info. Im knew at this.
Reply Quote

Re: building a 3000rpm August 21, 2012 02:34PM
Water to air or air to air usually refers to an intercooler....What organization can you run an intercooler at in Nebraska??
Reply Quote

Re: building a 3000rpm August 21, 2012 03:02PM
Northeast Nebraska pullers association. Thanks for the info
Reply Quote

Re: building a 3000rpm August 22, 2012 12:32AM
Have some proven parts coming off a motor set up for that style class
. post your number if interested
Reply Quote

Re: building a 3000rpm August 23, 2012 02:49PM
hey 4020 let me know what you have. im just trying to get a idea before the build. 402-720-3408
Reply Quote

Re: building a 3000rpm August 25, 2012 09:20AM
Probably will need at least a 4 disk to get good life from your clutch. I am guessing with a box stock 3lm on a 466 you will be running c3-c4 if you get it tuned right. If you are stuck with that small pump you will probably get most power with 5x.025 injectors and more timing than you should probably run for a 3000rpm tractor that will give you mosthp but less torque a good intercooler will help a lot with that though.
Reply Quote

Re: building a 3000rpm August 22, 2012 01:05AM
I like your rules, 466 CID and that small turbo you should not out grow your clutch and transmission.
Reply Quote

Re: building a 3000rpm August 22, 2012 01:28PM
We run a deere 3000 rpm, 3lm box turbo same rules as you just up and across the river. Get a good 10 mil pump, some good injectors 4x24 will work good, some 93 lines and a decent cam will help. Play with the pump timing until you find the sweet spot and the next problem you will have is you will need a taller gear.
Reply Quote

Re: building a 3000rpm August 23, 2012 02:53PM
hey 4020 let me know what you have. Im just trying to get some info and parts lined up before the build. 402 720 3408
Reply Quote

Re: building a 3000rpm August 25, 2012 06:14AM
4x24 injectors will put u behind right out of the box most guys are running 5x20 or 22's now good cam will help proly will want to beef up the clutch also
Reply Quote

Re: building a 3000rpm August 26, 2012 12:20AM
The 4x24 are fairly common. With a 3lm turbo do you really need 5x20 or 5x22 ?
Reply Quote

Re: building a 3000rpm September 22, 2012 03:11PM
Did you find the parts you were looking for? I might have some extras.
Reply Quote

Re: building a 3000rpm September 23, 2012 12:44AM
Got 6-5x22's if interested. I'll see if there for sale. Wouldn't work the way we wanted them to on a GT 42. May work on a 3lm.
Reply Quote

Re: building a 3000rpm September 23, 2012 02:46PM
How much?
Reply Quote

Re: building a 3000rpm September 23, 2012 03:11PM
How much boost from the turbo would work good for the 5-22's and how much cc of fuel.
Reply Quote

Re: building a 3000rpm September 24, 2012 02:27PM
I'll check on price and get back to you. I'm in field so it might be a few days. We run 500 cc with a GT-42
Reply Quote

Re: building a 3000rpm September 25, 2012 05:33AM
If your looking to have your cam regound check us out.

Eric Staab
No Limit MFG

Phone: 715-384-4422
www.nolimitmfg.com
email: nolimitmfg@yahoo.com
Reply Quote

Re: building a 3000rpm September 26, 2012 02:36PM
To jd3000, I'll take $200 for the 5-22 injector nozzles. I take for granted you have injector bodies. If you want to talk to me call 641 425 2917, after 8:00 in the morning and before 5:00 in the after noon, central time.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009