06:32:58pm, Monday, May 13, 2024
|
Oliver Rears
|
Anonymous User
|
What model rearend housing are the oliver guys using that run LSS and LLSS? |
|
Re: Oliver Rears
|
Registered: 09/24/2008 Posts: 26 |
LLSS 1800 |
|
Re: Oliver Rears
|
Anonymous User
|
Thanks |
|
Re: Oliver Rears
|
Anonymous User
|
early 1800 is not pressure lubed you want to stay with late 1800,1750,1850 altho they are a bit heavier.
If your building one I may have some parts for you. |
|
Re: Oliver Rears
|
Registered: 11/03/2008 Posts: 45 |
We used the earlier 1800 on our SF and changed the bottom pinion and gears to the later style. We added a Holley 1500 fuel pump and are oiling the pinion shaft and both bull pinions. Works great, be glad to share information. |
|
Re: Oliver Rears
|
Anonymous User
|
Any idea on weight savings from 1800 to 1850
Interested in knowing. |
|
Re: Oliver Rears
|
I know where there is a rolling chassis with a 1650 rear if your interested |
|
Massey Rears
|
Anonymous User
|
What about massey rears for a llss? |
|
Re: Oliver Rears
|
Anonymous User
|
Budget isn't quite big enough yet cory but im working on it, I cant decide between a massey or a oliver, but thanks for the tip anyway. Btw would a 1650 hold up in llss. Thanks Again. |
|
Re: Oliver Rears
|
Registered: 05/15/2010 Posts: 144 |
It should....I believe Cory was running twin chargers on his. Also, Jeff Dachel was running a 478+ Hercules on alcohol with 2 big twins back in the 2000 - 2004 etc. time frame Dan Dunham |
|
Re: Oliver Rears
|
1066a
|
What u want for your rear end and tranny |
|
Re: Oliver Rears
|
I had a 1650 rear under a twin charger light super... needed some bracing and needle bearings, but seem to be ok.... |
|
Re: Oliver Rears
|
1066 send me an email and I will let you know. The 1650 is one off Jeff Dachels old setups. Csnider880@yahoo.com |
|
Re: Oliver Rears
|
To Cory s is that oliver 1650 rear still available? |
|
Re: Oliver Rears
|
shell idea man
|
Myself, I would e-mail him at the addy he put right there in his post.
just sayin' |
|
Re: Oliver Rears
|
rumor
|
Heard it was sold |
|
Re: Oliver Rears
|
Might b sold but not 100 percent sure |
|
Re: Oliver Rears
|
1650 is sold |
|
Re: Oliver Rears
|
Anonymous User
|
I have a 1850 rear w/2255 tub, weld on hubs i'd sell |
|
Re: Oliver Rears
|
How much?? 314-372-1999 |
|
Re: Oliver Rears
|
Anonymous User
|
I'll call you tomorrow |
|
Re: Oliver Rears
|
Registered: 03/18/2012 Posts: 3 |
I would also be interested, is there sheet metal? 616-890-0307 |
|
Re: Oliver Rears
|
Anonymous User
|
Yes there is sheet metal. I will call you tomorrow |
|
Re: Oliver Rears
|
scott potter
|
how about a 1600 rear will they hold? wanting to build a 6000 turbo gas tractor |
|
Re: Oliver Rears
|
Registered: 09/23/2008 Posts: 633 |
Who knew that oliver rear and tubs were so popular. I should probably list the three I have one has the 2255 tub, one has a 2-105 tub and one with a tube frame. I have a complete 1650 rearend torn down to the hull, it is a former puller, sold and the guys took it apart and then decided to go with a different setup and traded it back. Have a couple of cats running takeouts as well as a 8.3 cummins. If anyone wants any of it or all of it, let me know. |
|
Re: Oliver Rears
|
whats the weight difference of a 1650 and 1850 rear I would like to be light enough for a llss 6000 class ? |
|
Re: Oliver Rears
|
Red Menace
|
where is jeff dachel from? |
|
Re: Oliver Rears
|
Registered: 05/15/2010 Posts: 144 |
Wisconsin....He used to run a pretty hard running 2050 Oliver running a Herc with twins on alcohol back in the early 2000's...He won the LSS in Tomah with it in 2000 or 2001 and all with a 1650 rear. I believe he had a needled 4 spider diff in it that he made for it. Dan Dunham |
|
Re: Oliver Rears
|
570
|
you will be fine useing a 1800 or 1855 rear you should be able to carry around 700 lbs with ether |
|
Re: Oliver Rears
|
Sven
|
Gee willekers! How you a gonna carry 7 hunert pounds all at once?
I kin only carry about 50 pounds at once. Now my wife Lena kin carry a couple hunnert pound weights at a time, so I let her put the weights onna tractor. I think it is nice of me to keep her involved like that. That way she don't get bored from cooking and cleanin and waxin the tractor and sweeping out the hauler and keepin the coolers stocked and gettin groceries and chargin the batteries, and airin up the tires and checkin line up and gettin me a registered and cleaning up my drivin suit and makin sammiches, adjustin the hitch, movin weights dependin on track conditions, filmin the runs, keepin track of what place I'm in, gettin the check, and makin more sammiches, dustin off the tractor before she winches it in the trailer, pre trip inspects the hauler, and fixes any lights that aint workin', rubs my sore feet from them funny drivin shoes and then has the nerve to sleep onna way home. |
|
Re: Oliver Rears
|
Spiders
|
How many spiders did a 1650 rear come with from the factory? |
|
Re: Oliver Rears
|
Anonymous User
|
two |
|
Re: Oliver Rears
|
I have a complete 1850 rolling chassis. Sheetmetal and all. It was a gasser. Take $1400 for it. 931-212-3602 |
|
Re: Oliver Rears
|
Registered: 10/13/2010 Posts: 36 |
So how strong is a super 88 rearend |
|
Re: Oliver Rears
|
It will work, but not in the stock form |
Website Statistics
Global: Topics: 38,746, Posts: 229,888, Members: 3,334.
This forum: Topics: 37,086, Posts: 225,992.
Global: Topics: 38,746, Posts: 229,888, Members: 3,334.
This forum: Topics: 37,086, Posts: 225,992.
Our newest member DANNY.WAINSCOTT@YAHOO.COM
