Hx60 turbo housing
|
Turbo?
|
Are all HX60 turbos the same? Meaning if I get a CDS Hx60 turbo with a 25 housing on it ,can I take any 32 housing and put on it? |
Re: Hx60 turbo housing
|
Turbo?
|
Are there different size wheels? |
Re: Hx60 turbo housing
|
Anonymous User
|
Yes , 3.4 & 3.6 |
Re: Hx60 turbo housing
|
Turbo?
|
So if it's a 3x3, what size would it be? Whats best for LLSS Allky?
Thanks |
Re: Hx60 turbo housing
|
Anonymous User
|
I run a 3.4 exhaust wheel |
Re: Hx60 turbo housing
|
Turbo?
|
So all HX60 housing are not interchangable? |
Re: Hx60 turbo housing
|
Registered: 01/20/2011 Posts: 446 |
No they are not. There are 3 diffrent stock turbine wheels and lots of wheels that have been cut down to 3" for superfarm. This means there are stock sizes as well as slugged stock housings and custom cast ones like cds offers. |
Re: Hx60 turbo housing
|
Turbo?
|
I found a CDS 8 blade billit 3x3. What size wheel would it have? I assume a different size wheel takes a different size housing |
Re: Hx60 turbo housing
|
Registered: 01/20/2011 Posts: 446 |
If you seriously ask this question you might need some help way beyond what housings will fit. a 3x3 would be a 3" inlet and a 3"outlet because its 3x3!! |
Re: Hx60 turbo housing
|
Turbo?
|
So you are calling me the dumb a$$, but still have not or can not answer my question. |
Re: Hx60 turbo housing
|
seriously
|
Umm.................. he did answer your question 3" (3-inch, three inch) wheel. that's why it's a 3x3.... 3 inch inlet wheel and 3 inch outlet wheel... hence the 3x3. he never called you a dumb a$$ either all he said was you need some help other than housing info. |
Re: Hx60 turbo housing
|
Moderator Registered: 03/27/2008 Posts: 1,152 |
from [caboturbo.nl] Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com] |
Re: Hx60 turbo housing
|
Turbo?
|
Sorry, thought 3x3 was inlet hole and outlet hole, not wheel size,So saying a hx60 is like saying IH 1066, lots of differences.Was told need a HX60 with a 32 housing, found a 3x3 but smaller housing, wondering if all I needed was any 32 housing, sounds like not, I have to match the wheel size. I just see people on here looking for diff housing not talking about wheel size. Sorry for my confusion , and thanks for all the help. |
Re: Hx60 turbo housing
|
ProLite
|
There is 3.4, 3.6 and what size is the third?? |
Re: Hx60 turbo housing
|
Registered: 01/20/2011 Posts: 446 |
There is an 11 and a 12 blade 3.4 turbine but the contours and actual sizes are slightly diffrent so they will not interchange. |
Re: Hx60 turbo housing
|
Registered: 07/06/2010 Posts: 147 |
If you have the 3x3 turbo and 25 exh housing, the 32 housing could be sleeved and remachined to match your current
3" modified exhaust wheel. hope this clarifies. " |
Website Statistics
Global: Topics: 38,768, Posts: 229,934, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,025.
Global: Topics: 38,768, Posts: 229,934, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,025.
Our newest member Jacklovik2009