600cu 8.1 October 31, 2012 01:06PM
what needs to be done to get a 8.1 JD to 600cu and who does it at a reasonable price

Re: 600cu 8.1 November 01, 2012 12:38AM
some one must have had this done before

Re: 600cu 8.1 November 01, 2012 01:05AM
4 7/8 bore and stroke the crank to 5.35 for 600 inches

Re: 600cu 8.1 November 01, 2012 01:47AM
I think a 9.0 liter deere crank will fit in a 8.1 liter block! The stroke is 5.350 on a 9.0 crank so with 4 7/8 bore would be 600 cubes! Hope this helps

Re: 600cu 8.1 November 01, 2012 01:50AM
9.0 crank will fit in an 8.1 block. Just takes some machining.

Re: 600cu 8.1 November 01, 2012 06:14AM
how mutch machining and who does it

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,785, Posts: 229,971, Members: 3,340.
This forum: Topics: 37,099, Posts: 226,049.

Our newest member Jacklovik2009