01:16:08pm, Thursday, May 16, 2024
5.9 12v Cummins oil pump
|
12V
|
How good are the oil stock pumps? At what point do you need something better? Thanks |
Re: 5.9 12v Cummins oil pump
|
no problem
|
Never had an issue on a llss |
Re: 5.9 12v Cummins oil pump
|
12V
|
Thanks for the reply. |
Re: 5.9 12v Cummins oil pump
|
No problems here
|
I run mine about 5400 rpms in my pickup with no problems. Replaced the bearings after one season just for piece of mind but the ones I took out where fine. |
Re: 5.9 12v Cummins oil pump
|
Registered: 07/11/2008 Posts: 326 |
Look at using the 24V oil pump.. should bolt right in.. but has a little higher Volume than the stock 12V pump |
Re: 5.9 12v Cummins oil pump
|
Registered: 08/02/2008 Posts: 236 |
The current part number for both 12 and 24V engines are the same. The original 12V pumps were smaller. If you need more GPM to feed multiple turbo's a 8.3 oil pump can be modified to fit. |
Re: 5.9 12v Cummins oil pump
|
12V
|
Stock should work, 1 Turbo |
Re: 5.9 12v Cummins oil pump
|
farmageddon
|
I have ran one for around 120 hooks it makes 60 pound at idel and 100 down the track I had to weeken the relieve spring because i plug all the oil srayers ,and if you run this much pressure with the stock oil filter base you need to plug the oil filter bypass or you will end up running un filterd oil it opens if the filter gets plugged so the engine keeps getting oil 100 pounds will open it |
5.9 Rods ??
|
Are the LLSS running Billet Steel rods or Aluminum ?? |
Re: 5.9 Rods ??
|
farmaggedon
|
I run stock rods myself |
Re: 5.9 Rods ??
|
no problem
|
Stock work just fine |
Website Statistics
Global: Topics: 38,768, Posts: 229,934, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,025.
Global: Topics: 38,768, Posts: 229,934, Members: 3,338.
This forum: Topics: 37,095, Posts: 226,025.
Our newest member Jacklovik2009