11:36:08pm, Thursday, May 16, 2024
rpm readers
|
Looking for a rpm reader to put on tractor to run the hot farm 3000rpm class with rpm monitor any help to where can get one or how much would be greatly appiecated |
Re: rpm readers
|
Registered: 03/05/2012 Posts: 71 |
if you're talking of the sensor that is mounted by your front dampner then mine came from scheid. its an isspro sensor. ran around the $55 range. hope that helps you out. |
Re: rpm readers
|
What kind of plug at rear of tractor are most sleds using? and that is what im talking about thanks |
Re: rpm readers
|
They use a 110 volt outlet on all the sleds around here. Has to be a one piece wire with no splices from the sensor to the plug. |
Re: rpm readers
|
Sorry for all dumb questions but is that with the female on the tractor im assuming? |
Re: rpm readers
|
Yes, female on the tractor. |
Re: rpm readers
|
Registered: 03/05/2012 Posts: 71 |
connect the 2 wires from the sensor to the 2 flat spade terminals on your cord. don't connect the ground spade |
Re: rpm readers
|
binder-grinder
|
Will the stock ProComp sensor read off the magnet for the rpm box or do you have to alter the damper? |
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Our newest member Jacklovik2009