rpm readers September 17, 2014 01:24PM
Looking for a rpm reader to put on tractor to run the hot farm 3000rpm class with rpm monitor any help to where can get one or how much would be greatly appiecated

Re: rpm readers September 17, 2014 11:22PM
if you're talking of the sensor that is mounted by your front dampner then mine came from scheid. its an isspro sensor. ran around the $55 range. hope that helps you out.

Re: rpm readers September 17, 2014 11:47PM
What kind of plug at rear of tractor are most sleds using? and that is what im talking about thanks

Re: rpm readers September 17, 2014 11:52PM
They use a 110 volt outlet on all the sleds around here. Has to be a one piece wire with no splices from the sensor to the plug.

Re: rpm readers September 17, 2014 11:59PM
Sorry for all dumb questions but is that with the female on the tractor im assuming?

Re: rpm readers September 18, 2014 12:00AM
Yes, female on the tractor.

Re: rpm readers September 18, 2014 12:42AM
connect the 2 wires from the sensor to the 2 flat spade terminals on your cord. don't connect the ground spade

Re: rpm readers September 19, 2014 04:49AM
Will the stock ProComp sensor read off the magnet for the rpm box or do you have to alter the damper?

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,774, Posts: 229,941, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,029.

Our newest member Jacklovik2009