1066 weight December 31, 2012 07:48AM
What will a bare 1066 IH weigh with 20.8x38 on pressed rims. No weights.
Reply Quote

Re: 1066 weight December 31, 2012 09:46AM
How bare no 3pt arms? I think 10,200 with pressed steel and no 3pt. I could be wrong though.
Reply Quote

Re: 1066 weight December 31, 2012 10:03AM
I have seen a farm tractor 1066 with pressed 18.4-38's stripped to pull 9500. I know the 3-pt and pto were stripped, but don't recall about fenders.
Reply Quote

Re: 1066 weight December 31, 2012 10:14AM
No 3pt arms but probably with PTO.
Reply Quote

Re: 1066 weight January 01, 2013 06:46AM
I used to run a 9500lb class with cast centers yet in my 1066, no 3pt, 1000 pto, I had a different hitch setup on it and no weight bracket except the front bracket. Also had a different seat and mounting bracket on it.
Reply Quote

Re: 1066 weight January 01, 2013 10:27AM
I have a 1066 that is set up stock with 18.4 38s on cast centers and about 3 inches of fluid in each tire (couldn't get any more out without dismounting the tires) and it makes 10,000 lbs with no weights. It has the stock hitch, stock fuel tank with 15 gal. of fuel in it, front, center, and rear weight brackets. A stripped 1066 (No pto, 3pt, small fuel tank, and pressed rims with 20.8 tires) should be around 8800 to 9000# depending on driver.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,781, Posts: 229,963, Members: 3,339.
This forum: Topics: 37,099, Posts: 226,045.

Our newest member Jacklovik2009