09:34:38pm, Sunday, April 28, 2024
4020 with 466
|
Need help
|
Is there an exhaust manifold we can use to get the turbo under the stock hood on a 4020? Tractor is stock except the 466. Thanks. |
Re: 4020 with 466
|
up the limit
|
Not sure but you might try one off a 4320. |
Re: 4020 with 466
|
help
|
I wasn't sure the 4320 manifold would bolt on the 466 head. Will it? If so that looks like it would work. |
Re: 4020 with 466
|
Anonymous User
|
I am pretty sure that the 4320 manifold would fit on the 466 head. We have put a 4430 manifold on a 4010 head and also on a 466 head.
I have been told that a 4320 hood is wider than a 4020 so the turbo might still hit the hood. Also, I am not sure if you ever said what turbo you were running. I don't know about the 4320 manifold but a 3lm turbo will not fit on a stock 4430 manifold so I am assuming that it will not fit a 4320 either. Edited 1 time(s). Last edit at 05/15/2009 09:23AM by John Deere 466. |
Re: 4020 with 466
|
help
|
Yes we are going to run a stock 3LM. I think we would need an adapter plate for the turbo to the housing........ |
Re: 4020 with 466
|
Anonymous User
|
Here is a picture of one that I made for a 4010 using a 4430 manifold. I could make you one if you want. |
Re: 4020 with 466
|
green god
|
will a 55 serise manifold not work |
Re: 4020 with 466
|
Hello how much can you make me a kit for my 4020 for? |
Re:Hey john deere 466
|
Anonymous User
|
Hey JD 466- what rod/wire did you use to weld on that manifold? |
Re: Re:Hey john deere 466
|
Anonymous User
|
I used ni rod but the plate is also made of cast iron. |
Re: 4020 with 466
|
Registered: 08/03/2008 Posts: 437 |
nicest setup I saw was a regular 4010 manifold with exhaust outlet cut down and a flange made onto manifold for turbo to bolt on, then madeup the elbow to go out original hole. You could get a combine manifold and mount turbo in front but you would have to put exhaust out side screen. If using a stock charger with a stock manifold for 466T it will clear by maybe a finger width but anything bigger than a TO4 it will hit, unless you put a bubble in hood. Someone used to offer a fiberglass hood with a scoop already in it for like $500, but not sure who it was. Anyone have any idea? |
Re: 4020 with 466
|
Anonymous User
|
I made a manifold to mount a 3lm turbo under the hood of a 4010. It was a 4430 manifold and I machined the riser off of it that goes up to the turbo. Then I machined a plate and welded it to the manifold. There is not much room but it does fit under the hood. |
Re: 4020 with 466
|
Help
|
Do you have one you want to sell or will you make another one? |
4020with466
|
go buy m&w turbo exhaust manfiold |
Re: 4020 with 466
|
Anonymous User
|
I don't have one to sell but I would make you one if you have a 4430 manifold. I will check with my buddy to be sure that it was a 4430 that we used. |
Re: 4020 with 466
|
help
|
I have one off of a combine right now. Looks like a 4430 one.......... |
Re: 4020 with 466
|
deere boys
|
It can be done, with no cutting of the hood. We have built four of them. Give me a call 605-661-4972. |
Re: 4020 with 466
|
jd4010puller_
|
i use a manifold off of a 7810and a 3lm and it fits under the hood but intake side touches on the inside of the hood but it also makes the exhaust go out the back |
Re: 4020 with 466
|
help
|
Will it miss the hydraulic valve? |
Re: 4020 with 466
|
jd4010puller_
|
Not sure but guessing probably not once up put a elbow on to go out the hood |
Website Statistics
Global: Topics: 38,641, Posts: 229,707, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Global: Topics: 38,641, Posts: 229,707, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Our newest member JD_8520