Roller cam in a ih 3000rpm September 22, 2013 04:14AM
Is it worth the time to put a roller came in a 3000 rpm hot farm?
Reply Quote

Re: Roller cam in a ih 3000rpm September 22, 2013 05:52AM
Probably not unless you have reason to rebuild the engine. Maybe a 15 to 25 hp gain in 3000 rpm engines.
Reply Quote

Re: Roller cam in a ih 3000rpm September 22, 2013 06:17AM
How about in an open rpm class running 3-3500 rpm down the track
Reply Quote

Re: Roller cam in a ih 3000rpm September 22, 2013 07:27AM
We are having a problem to keep the wheels spinning at the end of the track was woundering it that would help
Reply Quote

Re: Roller cam in a ih 3000rpm September 22, 2013 08:57AM
wont help with that enough to notice. main thing with roller cam is longevity
Reply Quote

Re: Roller cam in a ih 3000rpm September 22, 2013 03:13PM
Roller cam will make the engine more snappy and it also depends what grind u put on it can get i ground so that its torky and will keep the engine alive at the end
Reply Quote

Re: Roller cam in a ih 3000rpm September 23, 2013 01:23AM
It depends on what you have now for a cam grind. There are some really good flat tappet grinds for the 3000 rpm class. But they are usually harder on the camshaft. So good oil is really important. If you have the smaller bore block, improvements can definitely be made going to the roller. 1456ih is right in the fact that the biggest benefit is longevity.

If your looking for rollers we have them in stock for both the 1" bore blocks, and larger 1.120 bore blocks, complete drop in no machine work required. They are also 40% lighter than the stock lifters. We also grind cams too. Let us know if you need anything.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,766, Posts: 229,932, Members: 3,337.
This forum: Topics: 37,095, Posts: 226,025.

Our newest member DANNY.WAINSCOTT@YAHOO.COM