03:48:38am, Friday, May 17, 2024
|
IH starter
|
Registered: 09/04/2008 Posts: 95 |
I had talked to a guy on the phone a few months back and he told me there was a guy in the Midwest making starters to fit in the factory spot on an IH that was half the weight and spun like a powerstroke starter...dose anybody know anything about these??? |
|
Re: IH starter
|
Registered: 04/01/2008 Posts: 143 |
I would also be interested in one of these, if they are available..... |
|
Re: IH starter 66 series 86 series
|
Utube, 1066 denso starter international /denso hydro 100 international starter /1086 international denso starter / also john deere starter 4030 denso starter |
|
Re: IH starter 66 series 86 series
|
Call Karl at Atlas Tractor he sells them HY Torque starters |
|
Re: IH starter
|
redfarmer
|
It must be a secret nobody knows I guess. I too would be interested in one. |
|
Re: IH starter
|
starter man
|
Can get them but they are about 600.00 because of the ccw rotation |
|
Re: IH starter
|
Fan69
|
Yes there is a power stroke starter that will work.. Im not sure on what year model but there is one that works and you need and adapter plate for the bell housing... |
|
666/686 starter?
|
Registered: 04/12/2008 Posts: 399 |
Is there a gear reduction starter for the 666 chassis that will start a dt360? |
|
Re: 666/686 starter?
|
Anonymous User
|
We had one on our MX150 (656) center section. It came from a guy in Indiana. It sarted a 504 cube. It cost $265.
Bill |
|
Re: 666/686 starter?
|
Anonymous User
|
I am using the stock 312 starter and it spins my DT360 just fine. |
|
Re: 666/686 starter?
|
Registered: 04/12/2008 Posts: 399 |
Bill- was it a gear reduction or high torque design? I bought a reman'd starter on line and it doesnt have enough give to turn my engine. Pull start it and it runs instantly. |
|
Re: 666/686 starter?
|
Anonymous User
|
We put a high torg reduction to save weight, but a stock starter should spin it fine.
Bill |
|
Re: 666/686 starter?
|
Registered: 04/12/2008 Posts: 399 |
Any contact info available for builder/supplier? Possible part number? |
|
Re: 666/686 starter?
|
Registered: 03/01/2009 Posts: 133 |
I have that starter brad is talking about. It says in it Lemmons Tractor performance engineering. I can send pic if you like. It really works well on my tractor! |
|
Re: 666/686 starter?
|
Registered: 04/12/2008 Posts: 399 |
Heck yes. Please send me a picture when you get around the shop. Resend the 4.25 sleeve blank part number again as well. Lost that information. Thanks. |
|
Re: IH starter
|
Looking4one
|
I'm looking for one of these as well. Does anyone have a part number, web site or phone number to get one? |
|
Re: IH starter
|
Registered: 09/24/2008 Posts: 26 |
Lemmons 765 938 1808 I have one on my 460 with a 600ci 400series and it will start it any time hot or cold . I think they are around 400$. |
|
Re: IH starter
|
Ktp560, Tell us what flywheel you are using and machine work measurement? What's your recipe for this? I have a lemon starter and it will crank this stock dt466 engine just fine on my 460 farmall...... when it EVER engages the flywheel. Grinds and makes the awfullest noise. You cringe when you hit the start button because you think the starter is going to fall off! Lol The end of the shaft moves around when you pull it out and push back and forth on it.... does anyone think that these starters may not be as good as they used to be? Maybe the quality has dropped off a bit? Thanks |
|
Re: IH starter
|
I bought one for a customers tractor from Nations starter and alternator (888) 334-0588 Cape Girardeau Mo
Its a High torque starter and I think it weighs about 19lbs |
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Our newest member Jacklovik2009
