Oliver 1600-white 2-70 disc brakes November 03, 2013 02:24AM
Is anyone making disc brake rotors for oliver 1600 series or a white 2-70 ?
Reply Quote

Re: Oliver 1600-white 2-70 disc brakes November 03, 2013 09:59AM
Yes we do. We have complete kits or just rotors.


Nick Paulson
Paulson Performance Machining
Ogden, Iowa
ppmengineering@live.com
(515) 491-4270
www.paulsonperformance.com
www.facebook.com/paulsonperformancemachining
Reply Quote

Re: Oliver 1600-white 2-70 disc brakes November 03, 2013 10:22AM
take two of you orig brake disk cut the center out machine a round disk and put your centers in it done all of mine with a torch and just had a machine shop touch it up
Reply Quote

Re: Oliver 1600-white 2-70 disc brakes November 04, 2013 10:23AM
Thanks for the info guys. That's what I was looking for.
Reply Quote

Re: Oliver 1600-white 2-70 disc brakes November 04, 2013 01:18PM
I use a 1650 rear on an econo-mod. I went to a junk yard and bought a disc brake setup with rotors and calipers. I took the old disc from the original brakes and used the splines and welded them together. Made my own brackets for the calipers and used Wilwood master cylinders. The only thing that was a bit of a problem was that the brake housing had to be cut off to allow clearance. You have to use that piece as it holds the bull pinion in place. Without cutting it off the bull pinion is not long enough plus you run out of room for the calipers.

S'no Farmer
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,675, Posts: 229,777, Members: 3,327.
This forum: Topics: 37,078, Posts: 225,950.

Our newest member Jason